Guest Yurbuh Tuggly Posted February 3, 2013 Report Posted February 3, 2013 can you send.me the rom(cm10) to test it...??? can i flash using cwm ?? Look up two posts for links. Already asked and answered.
Guest N1ko5zAN Posted February 3, 2013 Report Posted February 3, 2013 i saw the question now... but i see no link...the only link is for.the drivers for the camera flash
Guest Di0g0 Posted February 3, 2013 Report Posted February 3, 2013 i saw the question now... but i see no link...the only link is for.the drivers for the camera flash Go to BLADE III forum ;)
Guest N1ko5zAN Posted February 3, 2013 Report Posted February 3, 2013 and do i need to change anything ??? for the touchscreen to work and camera ???
Guest Di0g0 Posted February 3, 2013 Report Posted February 3, 2013 and do i need to change anything ??? for the touchscreen to work and camera ??? Touchscreen no, camera yes, the flash isn't working on that ROM. Go to page 5 KonstaT said that ;)
Guest N1ko5zAN Posted February 3, 2013 Report Posted February 3, 2013 ok... i will try it...thanks... i will post conments after dl...
Guest papars Posted February 3, 2013 Report Posted February 3, 2013 Can somebody make an image for the aqua with all the required mods, for people not having the required skills?
Guest Pafinho Posted February 4, 2013 Report Posted February 4, 2013 (edited) The only problem reported on another forum by a Acqua user is that the camera flash isn't working, but the reason for this is because BLADE III don't have flash :S Yes, it was me.... Since this CM10 works so well on our Skate Acqua, should we not open a dedicated thread to this subject? there are many guys in Portugal that use TMN A15 (Zte Skate Acqua) that will like this news!!! Abraços Pedro Edited February 4, 2013 by Pafinho
Guest Yurbuh Tuggly Posted February 4, 2013 Report Posted February 4, 2013 My CM10 builds should now support ZTE Acqua. Please test and report back. :) Is there any reason to think that this ROM would not work on the Medion version of this phone?
Guest epyloxias Posted February 4, 2013 Report Posted February 4, 2013 Yes, it was me.... Since this CM10 works so well on our Skate Acqua, should we not open a dedicated thread to this subject? there are many guys in Portugal that use TMN A15 (Zte Skate Acqua) that will like this news!!! Abraços Pedro Here in Greece also are many users of ZTE ACQUA.
Guest N1ko5zAN Posted February 5, 2013 Report Posted February 5, 2013 I think it would be a good thing to open a whole new thread about cm10 development!!! With dedicated links and etc. I've been using it for a couple of days now and I must admit it is really stable .. some minor bugs I've noticed have to do with the notification area .. for example yesterday my phone "crashed" when I used the notification area to switch on the WiFi .. but it was a single event... hasn't happened again.. another minor bag is with tmobile theme manager used in cyanogen mod... it crashes when you try to apply a new theme... but it applies it either way... anyway..I think upgrading to cm10(4.1.2 jb ) from stock 4.0.4 is worth the shot... the phone works a lot better and much faster than before ..battery life is extended by a little ..don't expect miracles..and over clocking capabilities are present... Give it a try...
Guest N1ko5zAN Posted February 5, 2013 Report Posted February 5, 2013 Also don't forget to upgrade previous versions of clockworkmod to latest (found on this thread) .. if you are already on clockworkmod just download flashable zip and flash it using clockworkmod...it worked for me... and then proceed to the upgrade to cm10...
Guest KonstaT Posted February 5, 2013 Report Posted February 5, 2013 Can somebody make an image for the aqua with all the required mods, for people not having the required skills? What required mods? Only Acqua specific issue is that camera flash doesn't work. That's nothing major if you ask me. There's a flashable zip at the bottom of this post. Since this CM10 works so well on our Skate Acqua, should we not open a dedicated thread to this subject? There's really not much point in that. There's already one thread in the Blade III subforum and you can post to that thread. There's shouldn't be any Acqua specific issues anymore. Is there any reason to think that this ROM would not work on the Medion version of this phone? No, not that I know. It should work in all of the single-SIM variants as far as I can tell. Telephony obviously won't work in dual-SIM variants. @everyone Here's a flashable zip for camera flash issue. At least it gives me the option to toggle camera flash on Blade III. Please test and report back. If it works, I'll include it for everyone in the next release. cm10-acqua-camera-flash.zip
Guest Di0g0 Posted February 5, 2013 Report Posted February 5, 2013 Thanks for the work KonstaT :) So we can use the Blade III topic to report problems/bugs with the ROM instead of this topic, right?
Guest Pafinho Posted February 5, 2013 Report Posted February 5, 2013 What required mods? Only Acqua specific issue is that camera flash doesn't work. That's nothing major if you ask me. There's a flashable zip at the bottom of this post. There's really not much point in that. There's already one thread in the Blade III subforum and you can post to that thread. There's shouldn't be any Acqua specific issues anymore. No, not that I know. It should work in all of the single-SIM variants as far as I can tell. Telephony obviously won't work in dual-SIM variants. @everyone Here's a flashable zip for camera flash issue. At least it gives me the option to toggle camera flash on Blade III. Please test and report back. If it works, I'll include it for everyone in the next release. cm10-acqua-camera-flash.zip Photo flash works very well Thanks for your work!! Abraço Pedro
Guest KonstaT Posted February 5, 2013 Report Posted February 5, 2013 Thanks for the work KonstaT :) So we can use the Blade III topic to report problems/bugs with the ROM instead of this topic, right? Yeah, please do. Much easier than maintaining separate threads. Photo flash works very well Thanks for your work!! Abraço Pedro Great, thanks for testing. :)
Guest papars Posted February 5, 2013 Report Posted February 5, 2013 May I suggest then to make a dedicated tread in this Acqua forum that points to the relevant Blade III forum. This way people visiting this place will immediately know were to look for alternative ROM.
Guest Yurbuh Tuggly Posted February 5, 2013 Report Posted February 5, 2013 Just to confirm, FYI: The CM 10 ROM from KonstaT works just fine on the Medion Life P4012 (AKA ZTE Acqua in custom Medion clothing). No major problems at all noticed yet. Except the device is identified on the PC as "Blade III Portable Media Player" :P
Guest Pafinho Posted February 5, 2013 Report Posted February 5, 2013 Except the device is identified on the PC as "Blade III Portable Media Player" :P I belive that you can change that editing build.prop Abraço Pedro
Guest N1ko5zAN Posted February 5, 2013 Report Posted February 5, 2013 Well some hours ago I encountered the same problem I reported previously with the notification area.. it caused the phone to freeze and restart.. It was just when I clicked the WiFi button to turn it on... does anyone know what could be the cause ?
Guest H3nS Posted February 5, 2013 Report Posted February 5, 2013 (edited) I have tested the acqua rom and run smooth like butter... the only thing that i have to say is the proximity sensor is not working the way he should work... for example you are in call if you stay too long you can't hung up the call because the screen stays dark.... and one more thing in camera you put to film and select the effect the camera crash.... nothing else to complain... One more thing can you put the contacts to acess direct to SIM card numbers???? The flash from the camera is working include that on the next release please. Thanks cheers Edited February 5, 2013 by H3nS
Guest Di0g0 Posted February 5, 2013 Report Posted February 5, 2013 I have tested the acqua rom and run smooth like butter... the only thing that i have to say is the proximity sensor is not working the way he should work... for example you are in call if you stay too long you can't hung up the call because the screen stays dark.... and one more thing in camera you put to film and select the effect the camera crash.... nothing else to complain... One more thing can you put the contacts to acess direct to SIM card numbers???? The flash from the camera is working include that on the next release please. Thanks cheers Hummm about the proximity sensor, isn't there an option to calibrate the sensor like on android 2.3 dev tools?
Guest H3nS Posted February 6, 2013 Report Posted February 6, 2013 Hummm about the proximity sensor, isn't there an option to calibrate the sensor like on android 2.3 dev tools? there is a option to calibrate but even after calibrte the sensor does work real good for exemple when you are calling iff you wann hang up the cal you can't because the screen stiil off
Guest KonstaT Posted February 6, 2013 Report Posted February 6, 2013 New build. cm-10-20130206-KonstaKANG-atlas40.zip http://www.mediafire...au73vuhv6ebub4x md5:71439aa04071ef54ab534df424909367 -proximity sensor issues should be fully fixed (let's hope at least :P)added proximity wakelock (should fix black screen after 'long' calls)changed default proximity range (proximity should now work without any workarounds)removed proximity calibration (actual calibration data was never used but it was a good workaround) -fixed camera flash on Acqua
Guest H3nS Posted February 6, 2013 Report Posted February 6, 2013 New build. cm-10-20130206-KonstaKANG-atlas40.zip http://www.mediafire...au73vuhv6ebub4x md5:71439aa04071ef54ab534df424909367 -proximity sensor issues should be fully fixed (let's hope at least :P)added proximity wakelock (should fix black screen after 'long' calls)changed default proximity range (proximity should now work without any workarounds)removed proximity calibration (actual calibration data was never used but it was a good workaround) -fixed camera flash on Acqua i will test right now.... let you know something after i test :)....
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now