ICS chinese rom 4.03

[Guest meeko12]

Hi i recently had my huawei g300 rooted and put chinese ics rom on to it and now my baseband is 2030 and rom is B892.When im on my phone nothing works basically.Ive tried to recover and put things on it but everything fails.When i try and update its in Blue.After reading on here it says i have stock recovery.Is there any way to do anything with my phone now or have i bricked it.

[Guest Dazzozo]

have i bricked it.

pls no everyone jumps to this conclusion

What things have you tried. What have you tried to recover.

You've basically come here and given us no information.

[Guest Rico_89]

How did you get an ICS baseband on a GB ROM? That seems to be the problem but we need more info..

Edited September 2, 2012 by Rico_89

[Guest meeko12]

I had my phone rooted and had cmw on it but decided to go update to ics 4.03 so i downloaded the chinese ics rom through update from sd card.it worked ok.I then forgot to do a backup.My sd card completley broke.When i was on the ics rom my apps just forced closed all the time.I dont have cmw,titanium backup on it anymore etc.So i got a new sd card and tried to install again and when i get my phone into recovery all things are in blue writing and when i try to install its says opening package.then it says E signature failed etc installation aborted.So everyytime i try and install anything it comes up the exact same thing.When i try and press the volume buton simutanseoly when phone is off and power on my screen just stays pink.

[Guest wrtease]

force clockwork mod.yes this works.setup your mobile and do the clockwork thing. when it says waiting on device. unplug USB cable and hold down volume and plug USB cable back in and it should work now.look at screen.it should do it.

[Guest ursman]

force clockwork mod.yes this works.setup your mobile and do the clockwork thing. when it says waiting on device. unplug USB cable and hold down volume and plug USB cable back in and it should work now.look at screen.it should do it.

hi wrtease,

so i hawe the same problem with my chinese update. i have on my phone B926, the update from china wich i downloaden from huawei china web page. i copied on my sd card and update it. now i want to update to B934, or to downgrade back to gingerbread (B892, wich i han when i bought the phone) but i can't do it. whatever i try upgrade/downgrade it starts, the pink line charges a bit..... apoximetly 40 % and it freezes. it just sayes that way. i have to pull the battery to restart my phone. I also can't instal Cwm. I saw your coment, tried to instal CWM again and tried force clockworkmode. it didn't do anything. One more question....Is it possible to go back to gb if i didn't made a back of my first rom. can i use a back that someone else made? (i didn't make a back of my own). hope you can help me.... :(

[Guest ursman]

pls no everyone jumps to this conclusion

What things have you tried. What have you tried to recover.

You've basically come here and given us no information.

hi dazzozo,

so i hawe the same problem with my chinese update. i have on my phone B926, the update from china wich i downloaden from huawei china web page. i copied on my sd card and update it. now i want to update to B934, or to downgrade back to gingerbread (B892, wich i han when i bought the phone) but i can't do it. whatever i try upgrade/downgrade it starts, the pink line charges a bit..... apoximetly 40 % and it freezes. it just sayes that way. i have to pull the battery to restart my phone. I also can't instal Cwm. I saw your coment, tried to instal CWM again and tried force clockworkmode. it didn't do anything. One more question....Is it possible to go back to gb if i didn't made a back of my first rom. can i use a back that someone else made? (i didn't make a back of my own). hope you can help me.... :(

[Guest wrtease]

Make shure you delete the dload folder after you install b926 or you will face this problem.and then try my method okay

[Guest ursman]

Make shure you delete the dload folder after you install b926 or you will face this problem.and then try my method okay

]

Hi Wrtease,

I tryied again but still nothing... so i turn off my phone pull the baterry , wait for 5 seconds, put the battery back in. Now I press simultaneously tje power button + volume down. the phone will stay with the huawei logo (in my case the chinese logo). Now i connect the usb cable , I go to my computer and double click on "install-cwmrecovery-windows.bat" from the CWM easy installer file. then a cmd window apears on the computer screen with the message "waiting for device". Now I pull out the usb cable, press the volume down button (I hold it down) and put the usb cable back in, but it doesnt do anything... Am I doing something wrong? I just want to get away from these chinese version...

I also have a question...: s it possible to go back to gb if i didn't made a backup of my first rom. can i use a backup that someone else made? (i didn't make a backup of my own)

[Guest wrtease]

Did you have USB debugging ticked and unknown devices ticked .then try it again.it does work watch the PC screen.and what version of clockwork did you use. i used easy one.

[Guest ursman]

Did you have USB debugging ticked and unknown devices ticked .then try it again.it does work watch the PC screen.and what version of clockwork did you use. i used easy one.

yes I have usb debuggung ticked and also unknown sources is ticked. I am using CWM easy installer.

[Guest wrtease]

you have to run the three files adb then fast boot .then clockwork recovery file.

[Guest ursman]

I forgot to tell you...my phone is rooted and i also have unlocked the bootloader. to do thi i used this program http://www.modaco.com/topic/355583-guide-how-to-install-and-root-ics-403-on-the-g300/

.

at step 2 their is a link for a program. Someone was asking me if i correctly unlocked the bootloader. how can i check if it's correctly done. i opend the program am clicked on unlock bootloader. after a few seconds the program closed by it's self. hope this information can be of use.

[Guest ursman]

you have to run the three files adb then fast boot .then clockwork recovery file.

i did...stil the same...:(

[Guest wrtease]

try a different clockwork.. that might help.

[Guest ursman]

i tryed three so for....allways the same result. can you thinh of any other way to get rid of the chinere B926 (upgrage or downgrage)?

[Guest wrtease]

you might have better luck on using a win 7 pc .i think other operating systems seem alot harder to do this.i can only say keep trying.

[Guest ursman]

you might have better luck on using a win 7 pc .i think other operating systems seem alot harder to do this.i can only say keep trying.

i will try win7.....hope this wil help... thank you for your help.

[Guest wrtease]

yes i did all mine on win 7 32bit and worked fine.good luck

[Guest dan nedan]

I had my phone rooted and had cmw on it but decided to go update to ics 4.03 so i downloaded the chinese ics rom through update from sd card.it worked ok.I then forgot to do a backup.My sd card completley broke.When i was on the ics rom my apps just forced closed all the time.I dont have cmw,titanium backup on it anymore etc.So i got a new sd card and tried to install again and when i get my phone into recovery all things are in blue writing and when i try to install its says opening package.then it says E signature failed etc installation aborted.So everyytime i try and install anything it comes up the exact same thing.When i try and press the volume buton simutanseoly when phone is off and power on my screen just stays pink.

]

Hi Wrtease,

I tryied again but still nothing... so i turn off my phone pull the baterry , wait for 5 seconds, put the battery back in. Now I press simultaneously tje power button + volume down. the phone will stay with the huawei logo (in my case the chinese logo). Now i connect the usb cable , I go to my computer and double click on "install-cwmrecovery-windows.bat" from the CWM easy installer file. then a cmd window apears on the computer screen with the message "waiting for device". Now I pull out the usb cable, press the volume down button (I hold it down) and put the usb cable back in, but it doesnt do anything... Am I doing something wrong? I just want to get away from these chinese version...

I also have a question...: s it possible to go back to gb if i didn't made a backup of my first rom. can i use a backup that someone else made? (i didn't make a backup of my own)

it already fixed.

i have done this way: in bootloader mode connect the USB cable. then go into device manager window and check if your driver "android" is ok.

i am sure you got here some problems. (see the if you got an exclamation mark.

so right click update driver, just make sure you are online.

Only after updating, with your driver properly installed, try again with CWM installer.

Edited September 5, 2012 by dan nedan

[Guest gabmar82]

Ive the same problem (pink bar freezed at 40%)

but also......the huawei logo (chinese logo) that is not blocked but......the phone reboot every 3-4 seconds.... :(

Edited September 15, 2012 by gabmar82

[Guest gabmar82]

Ive the same problem (pink bar freezed at 40%)

but also......the huawei logo (chinese logo) that is not blocked but......the phone reboot every 3-4 seconds....

UP