Guest bobbes Posted June 22, 2013 Report Share Posted June 22, 2013 (edited) Hi all, i've managed to create a port of the TWRP 2.5.0.0. Since it is a port of the Xperia T smartphone, it can't get officially support by the TWRP team, so don't bother them with questions regarding this wonderfull peace of software when installed on a Cloudmobile. Tested on a S500 with 8260a-3 CPU and 8260a-1 CPU. Do not flash it on a Locked phone, it will not boot! When installing this recovery I can take no blame if you accidentely brick your phone......I'm just sorry if that happens but I can do nothing about it. If you follow the instructions, nothing bad should happen with your phone.... Screenshots: Features: - Fully touch featured! - Screensaver with slide to unlock - Fully themeable - Backup and restore - Wipe device/factory reset - Install ROM from .zip file - Auto detect if ROM is rooted, if it isn't rooted it will sugest you to install CWM Superuser app and binary - Enter Terminal commands - Integrated filemanager - Mount external SD-Card as a Mass Storage device to copy files - Fix permissions - ADB sideload (see http://teamw.in/ADBSideload how to use it) - Partition SD card (EXT partition and FAT are succesfully created despite the Failed message! TWRP needs to be restarted in order to correctly read the new partition table) Not working: Mounting internal storage as USB mass storage device Changelog: version 1.3 (13-07-2013): - Changed USB VendorID and DeviceID to Google device for correct recognition of Mass Storage device in Windows - Changed LUN0 device back to LUN%d in recovery binary version 1.2 (01-07-2013): - Changed android.c kernel code to assign lun0 as a removable device instead of CD-ROM (see kernel dir in zip) - Changed USB Vendor ID and product ID back to Google inc to prevent driver problems in windows OS - Added some init.rc code for some permission and ownership setting of the lun0/file version 1.1 (01-07-2013): - Changed USB Vendor and Product ID. Phone should now be detected as Acer Cloudmobile when USB is connected. - Changed LUN path, despite that USB mount is still not working properly - Changed brightness config path - Cleaned init.rc code version 1.0 (22-06-2013): - Initial release, ported from TWRP 2.5.0.0 for Xperia T - Acer Cloudmobile S500 JellyBean Kernel, compiled with ACER_SECURE_MOUNT disabled To run TWRP on a locked S500; enable USB debug and connect phone to PC via USB cable: adb reboot-bootloader wait until phone is rebooted in bootloader, then: fastboot -i 0x0502 boot TWRP_2.5.0.0_S500_v1.3.img This will run TWRP, it doesn't flash it. You can safely try and use TWRP. The only disadvantage is that battery % is not properly displayed. On unlocked bootloader you can safely flash the TWRP recovery to the recovery partition: adb reboot-bootloader Wait until phone is rebooted in bootloader, then: fastboot -i 0x0502 flash recovery TWRP_2.5.0.0_S500_v1.3.img To reboot: fastboot reboot (and press vol-down at the same time, wait until the phone vibrates and then press vol-up while releasing vol-down) Troubleshooting: 1. Windows doesn't recognize my External SD-card when I mount it a. Deinstall/remove all Acer S500 drivers (add/remove programms) b. Reboot Computer c. Reboot Acer S500 in TWRP Recovery (press power + vol-down, after vibrating press vol-up while releasing power + vol-down) d. Mount USB in TWRP Recovery e. Connect S500 to computer and wait until drivers are installed f. (safe) disconnect S500 from computer g. Reinstall S500 windows drivers 2. While in TWRP I can't connect to the phone with ADB a. Open devicemanager and select in 'Other device' -> 'S500' b. Right click on it and select 'update driver' c. Select 'choose driver from list' and choose Acer ADB driver. Credits:TeamWin Vache for giving me inspiration, thanks ;-)Zelea2 for his HowTo build your own kerneliFEAR_ and ciNicu For testing on a -1 CPU.Metsuki For testing. Download: V1.3: http://www16.zippysh...71734/file.html Edited July 17, 2013 by bobbes Link to comment Share on other sites More sharing options...
Guest iFEAR_ Posted June 22, 2013 Report Share Posted June 22, 2013 I booted it on my -1 S500 and it works fine, but I didn't test all the options. Link to comment Share on other sites More sharing options...
Guest ciNicu Posted June 22, 2013 Report Share Posted June 22, 2013 I booted it on my -1 S500 and it works fine, but I didn't test all the options. Same here. Link to comment Share on other sites More sharing options...
Guest Metsuki Posted June 23, 2013 Report Share Posted June 23, 2013 (edited) brightness doesn't seem to work. EDIT: USB doesn't work either Edited June 23, 2013 by Metsuki Link to comment Share on other sites More sharing options...
Guest DopT1 Posted June 23, 2013 Report Share Posted June 23, 2013 Nice work...backing up system now....I like the interface much more than CWM's....Backing up seems to work fine, didn't test the other features yet, but it looks promising so far. Can we flash that so it's permanent, like the workaround we have to do for CWM? Link to comment Share on other sites More sharing options...
Guest Metsuki Posted June 23, 2013 Report Share Posted June 23, 2013 Nice work...backing up system now....I like the interface much more than CWM's....Backing up seems to work fine, didn't test the other features yet, but it looks promising so far. Can we flash that so it's permanent, like the workaround we have to do for CWM? Indeed, I am liking this recovery menu too, very useful. I flashed permanentely and I had 0 problems accessing it. Link to comment Share on other sites More sharing options...
Guest davidevinavil Posted June 23, 2013 Report Share Posted June 23, 2013 Good work.. USB storage doesn't work Link to comment Share on other sites More sharing options...
Guest bobbes Posted June 24, 2013 Report Share Posted June 24, 2013 I booted it on my -1 S500 and it works fine, but I didn't test all the options. Same here. Thanks for testing. brightness doesn't seem to work. EDIT: USB doesn't work either Thanks, I did not test the USB mount option, I will look at it. Brightness, is at this moment not supported for our device. I'm searching for a workaround for that.... Link to comment Share on other sites More sharing options...
Guest davidevinavil Posted June 24, 2013 Report Share Posted June 24, 2013 Can you share graphics.c please? Which kernel did you used? Link to comment Share on other sites More sharing options...
Guest bobbes Posted June 24, 2013 Report Share Posted June 24, 2013 Can you share graphics.c please? Which kernel did you used? It's a port from the Xperia T TWRP. I did not compile recovery from source, thats also why Brightness and USB is not working (at the moment). The Kernel I compiled from the JB Acer Kernel source code with CONFIG_ACER_SECURE_MOUNT disabled and I modified the BOOT splash screen. Link to comment Share on other sites More sharing options...
Guest bobbes Posted July 1, 2013 Report Share Posted July 1, 2013 (edited) Guys, I need your help. I'm trying to get USB mount to work. When connected dmesg output shows this: <6>[ 11.816633] lun0: file too big: /dev/block/mmcblk1p1 <6>[ 11.816664] lun0: using only first 1151999 blocks It seems (in linux) that the drive can be mounted (/dev/sr0 or /dev/sr1 shows up) but when trying to mount it says that the drive can't be recognized. I think that above dmesg message illustrates the problem. Does anyone know how I can solve it? I enabled mass_storage in the init script for the Android composite driver. Another solution is to enable mtp, but how do I configure that in a recovery environment? This is my recovery log where LUN is configured: Starting TWRP 2.5.0.0 on Mon Jul 1 06:36:05 2013 I:Internal path defined: '/sdcard' I:External path defined: '/external_sd' I:Lun file '/sys/devices/platform/msm_hsusb/gadget/lun0/file' ** EDIT** Got it! The kernel did mount LUN0 as a CD-ROM device. I deleted the following code in android.c in kernel\drivers\usb\gadget directory: #if defined(CONFIG_MACH_ACER_A9) /* lun0 will be emulated to CDROM function */ config->fsg.luns[0].cdrom = 1; #endif Now it mounts as a removable device! Edited July 1, 2013 by bobbes Link to comment Share on other sites More sharing options...
Guest razvankim Posted July 3, 2013 Report Share Posted July 3, 2013 Works great. I didn't tested mount usb but i don't need that feature anyway:) thanx bobbes Link to comment Share on other sites More sharing options...
Guest bobbes Posted July 3, 2013 Report Share Posted July 3, 2013 Works great. I didn't tested mount usb but i don't need that feature anyway:) thanx bobbes Thanks for that! Mount under Linux works like a charm. In Windows there are some difficulties regarding installation of drivers for mass storage device. I'm working on it....I'll post an update later. Link to comment Share on other sites More sharing options...
Guest Spacecaker Posted July 6, 2013 Report Share Posted July 6, 2013 hi when i want to do a backupp with TWRP recovery 1.2 with fastboot -i 0x0502 boot TWRP_2.5.0.0_S500.img i get these errors Updating partition details... E: Unable to mount internal_storage. E: Unable to mount /external_sd during GUI startup. Running boot script... Finished running boot script. E: Unable to mount /external_sd/TWRP/.twrps E: Unable to mount /external_sd Link to comment Share on other sites More sharing options...
Guest bobbes Posted July 6, 2013 Report Share Posted July 6, 2013 Did you use an fat formatted sd-card? Link to comment Share on other sites More sharing options...
Guest Spacecaker Posted July 6, 2013 Report Share Posted July 6, 2013 fat32 yes Link to comment Share on other sites More sharing options...
Guest bobbes Posted July 17, 2013 Report Share Posted July 17, 2013 Did you use an fat formatted sd-card? fat32 yes Sorry, I can't reproduce your problem. I've tested the 1.3 version, I can't find any issue as you described. Maybe you can try the 1.3 version? Link to comment Share on other sites More sharing options...
Guest Spacecaker Posted July 17, 2013 Report Share Posted July 17, 2013 will try but this happens on any cwm and other recovery also System cache and other partitions it cant find i have -3 cpu Link to comment Share on other sites More sharing options...
Guest bobbes Posted July 17, 2013 Report Share Posted July 17, 2013 Strange, can you do a ls -l /dev/block/platform/msm_sdcc.1/by-name on your phone while running in normal Android system? Link to comment Share on other sites More sharing options...
Guest Spacecaker Posted July 17, 2013 Report Share Posted July 17, 2013 lrwxrwxrwx root root 2013-07-17 17:05 aboot -> /dev/block/mmcblk0p6 lrwxrwxrwx root root 2013-07-17 17:05 boot -> /dev/block/mmcblk0p12 lrwxrwxrwx root root 2013-07-17 17:05 cache -> /dev/block/mmcblk0p15 lrwxrwxrwx root root 2013-07-17 17:05 fsg -> /dev/block/mmcblk0p10 lrwxrwxrwx root root 2013-07-17 17:05 grow -> /dev/block/mmcblk0p23 lrwxrwxrwx root root 2013-07-17 17:05 logo -> /dev/block/mmcblk0p20 lrwxrwxrwx root root 2013-07-17 17:05 logo2 -> /dev/block/mmcblk0p21 lrwxrwxrwx root root 2013-07-17 17:05 misc -> /dev/block/mmcblk0p19 lrwxrwxrwx root root 2013-07-17 17:05 modem -> /dev/block/mmcblk0p1 lrwxrwxrwx root root 2013-07-17 17:05 modemst1 -> /dev/block/mmcblk0p16 lrwxrwxrwx root root 2013-07-17 17:05 modemst2 -> /dev/block/mmcblk0p17 lrwxrwxrwx root root 2013-07-17 17:05 pad -> /dev/block/mmcblk0p9 lrwxrwxrwx root root 2013-07-17 17:05 persist -> /dev/block/mmcblk0p11 lrwxrwxrwx root root 2013-07-17 17:05 recovery -> /dev/block/mmcblk0p13 lrwxrwxrwx root root 2013-07-17 17:05 rpm -> /dev/block/mmcblk0p7 lrwxrwxrwx root root 2013-07-17 17:05 sbl1 -> /dev/block/mmcblk0p3 lrwxrwxrwx root root 2013-07-17 17:05 sbl2 -> /dev/block/mmcblk0p4 lrwxrwxrwx root root 2013-07-17 17:05 sbl3 -> /dev/block/mmcblk0p5 lrwxrwxrwx root root 2013-07-17 17:05 ssd -> /dev/block/mmcblk0p2 lrwxrwxrwx root root 2013-07-17 17:05 system -> /dev/block/mmcblk0p14 lrwxrwxrwx root root 2013-07-17 17:05 tombstones -> /dev/block/mmcblk0p18 lrwxrwxrwx root root 2013-07-17 17:05 tz -> /dev/block/mmcblk0p8 lrwxrwxrwx root root 2013-07-17 17:05 userdata -> /dev/block/mmcblk0p22 u0_a100@android:/ $ Link to comment Share on other sites More sharing options...
Guest bobbes Posted July 24, 2013 Report Share Posted July 24, 2013 lrwxrwxrwx root root 2013-07-17 17:05 aboot -> /dev/block/mmcblk0p6 lrwxrwxrwx root root 2013-07-17 17:05 boot -> /dev/block/mmcblk0p12 lrwxrwxrwx root root 2013-07-17 17:05 cache -> /dev/block/mmcblk0p15 lrwxrwxrwx root root 2013-07-17 17:05 fsg -> /dev/block/mmcblk0p10 lrwxrwxrwx root root 2013-07-17 17:05 grow -> /dev/block/mmcblk0p23 lrwxrwxrwx root root 2013-07-17 17:05 logo -> /dev/block/mmcblk0p20 lrwxrwxrwx root root 2013-07-17 17:05 logo2 -> /dev/block/mmcblk0p21 lrwxrwxrwx root root 2013-07-17 17:05 misc -> /dev/block/mmcblk0p19 lrwxrwxrwx root root 2013-07-17 17:05 modem -> /dev/block/mmcblk0p1 lrwxrwxrwx root root 2013-07-17 17:05 modemst1 -> /dev/block/mmcblk0p16 lrwxrwxrwx root root 2013-07-17 17:05 modemst2 -> /dev/block/mmcblk0p17 lrwxrwxrwx root root 2013-07-17 17:05 pad -> /dev/block/mmcblk0p9 lrwxrwxrwx root root 2013-07-17 17:05 persist -> /dev/block/mmcblk0p11 lrwxrwxrwx root root 2013-07-17 17:05 recovery -> /dev/block/mmcblk0p13 lrwxrwxrwx root root 2013-07-17 17:05 rpm -> /dev/block/mmcblk0p7 lrwxrwxrwx root root 2013-07-17 17:05 sbl1 -> /dev/block/mmcblk0p3 lrwxrwxrwx root root 2013-07-17 17:05 sbl2 -> /dev/block/mmcblk0p4 lrwxrwxrwx root root 2013-07-17 17:05 sbl3 -> /dev/block/mmcblk0p5 lrwxrwxrwx root root 2013-07-17 17:05 ssd -> /dev/block/mmcblk0p2 lrwxrwxrwx root root 2013-07-17 17:05 system -> /dev/block/mmcblk0p14 lrwxrwxrwx root root 2013-07-17 17:05 tombstones -> /dev/block/mmcblk0p18 lrwxrwxrwx root root 2013-07-17 17:05 tz -> /dev/block/mmcblk0p8 lrwxrwxrwx root root 2013-07-17 17:05 userdata -> /dev/block/mmcblk0p22 u0_a100@android:/ $ Your partition table is the same as mine and the same as TWRP uses. I don't understand why you have problems with TWRP....sorry..... Link to comment Share on other sites More sharing options...
Guest Spacecaker Posted July 24, 2013 Report Share Posted July 24, 2013 Your partition table is the same as mine and the same as TWRP uses. I don't understand why you have problems with TWRP....sorry..... same here o.O it also is same on CWM :P my phone is -3 cpu type aswell i think it says i need to stop hacking my phones :P Link to comment Share on other sites More sharing options...
Guest wimmme Posted August 20, 2013 Report Share Posted August 20, 2013 When i try to flash this, it gives me this: fastboot -i 0x0502 flash recovery TWRP_2.5.0.0_S500_v1.3.img sending 'recovery' (9122 KB)... OKAY [ 0.718s] writing 'recovery'... FAILED (remote: Due to device is fused, non-merged file is not supported) finished. total time: 0.749s Link to comment Share on other sites More sharing options...
Guest Spacecaker Posted August 20, 2013 Report Share Posted August 20, 2013 unlock you;re bootloader Link to comment Share on other sites More sharing options...
Guest wimmme Posted August 20, 2013 Report Share Posted August 20, 2013 unlock you;re bootloader Hi, my bootloader IS unlocked .. What i noticed is that after flashing JB official back, my CWM asked me to protect by mrecovery, so the Acer ROM could not reflash the original recovery (or sth like that) Can i disable that CWM protection ? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now