Guest liquidhead Posted June 7, 2003 Report Posted June 7, 2003 I have been using my SPV for sometime on O2 with the wap GPRS settings - however, I want to use my free wap minutes to enable me to surf the internet - use orange update etc. However - I cannot set my SPV to dial 915000 - the international code cannot be left blank!!! I have tried putting 9 in the international code the 15000 in the number - but to no avail!! Can anyone help!!! :lol:
Guest martin Posted June 7, 2003 Report Posted June 7, 2003 I have been using my SPV for sometime on O2 with the wap GPRS settings - however, I want to use my free wap minutes to enable me to surf the internet - use orange update etc. If its internet surfing you want then try using this. ON O2 PAYG, I use WAP over GPRS and internet via CSD and both seem to be free for me anyway Create proxy Description : O2 WAP proxy The Internet, WAP Network, 193.113.200.195, WAP Create GPRS connection Description: O2 WAP The Internet, payandgo.o2.co.uk, payandgo, password Create Dial Up connection Description: O2 CSD The Internet, 44, 7712, 927927, o2wap, password In data connection make Internet connection=O2 CSD WAP connection = O2 WAP or O2 CSD In Internet explorer, tick 'Automatically detect settings'.
Guest heavyhank Posted June 14, 2003 Report Posted June 14, 2003 hi unfortunatly i dont have an answer for your q but rather a q oif me own....have you experienced incoming call problems on o2 if so could you tell me how to sort it email is [email protected] :lol:
Guest awarner [MVP] Posted June 14, 2003 Report Posted June 14, 2003 have you experienced incoming call problems on o2 if so could you tell me how to sort it Welcome to the site :lol: So we can be of help what sort of problems are you refering to?
Guest martin Posted June 14, 2003 Report Posted June 14, 2003 hi unfortunatly i dont have an answer for your q but rather a q oif me own....have you experienced incoming call problems on o2 if so could you tell me how to sort it email is [email protected] You're the third person who has asked this as spider and jimmy_nugget also have the same problem. Someone probably needs to contact O2 and tell them they have a possible call routing problem for mobile terminating calls. It might get resolved quicker if spider, jimmy_nugget and youself passed all three mobile numbers to O2 using the same fault reference, that way O2 might take it a bit more seriously. Its sometimes more difficult if your the only one complaining.
Guest jamzi Posted June 17, 2003 Report Posted June 17, 2003 Martin those o2 settings work perfectly for me. I can get connected but shortly after the first page loads up i get disconnected. Do you know why this is happening mate? Any help would be greatly appreciated :lol:
Guest martin Posted June 17, 2003 Report Posted June 17, 2003 I can get connected but shortly after the first page loads up i get disconnected. Do you know why this is happening mate? Hi jamzi The IP connection to the internet is signified by the small G in the top right of your phone. This is not permanent connection and will be automatically closed down when no data has been transmitted for a pre-determined length of time. The actual length of time the connection will stay active during the idle period (when no data is being transfered) can be set on the the phone. Programs - Settings - Data Conenctions - menu/options Idle disconnect after : (None, 30s, 1min, 5min, 10min) Try setting it to 5 or 10 minutes - this will give you time to read the page before the connection closes.
Guest jamzi Posted June 17, 2003 Report Posted June 17, 2003 Hi Martin Thanks for replying so quickly. Ive changed my idle time setting to 10, the problem was i had it set at none!!! Now this is going to sound like an amazingly stupid question but how do i get on wap and not the internet??!! I got my SPV and have searched everywhere and i just cant figure out how to get on wap??!! Please excuse my stupidity!!! :oops:
Guest martin Posted June 18, 2003 Report Posted June 18, 2003 how do i get on wap and not the internet??!! In the phone, there is internet software for HTML pages and WAP software for WML pages . In the above O2 pre-pay settings, the Internet connection uses a GSM timeslot and the WAP connection uses GPRS. For the O2 WAP homepage, if you use htpp://wap.o2.co.uk then you will use the GSM network and wsp://wap.o2.co.uk will use the GPRS Network. Try using wsp:// in the address to get WAP over GPRS :lol: p.s. I don't think you are charged for either the GSM or GPRS data connections on O2 PAYG :wink:
Guest jamzi Posted June 18, 2003 Report Posted June 18, 2003 Excellent mate, that works a treat. I dont suppose you could talk me through setting up my o2 MMS please? :lol:
Guest martin Posted June 20, 2003 Report Posted June 20, 2003 I dont suppose you could talk me through setting up my o2 MMS please? After much playing about with the O2 PAYG SIM, I discovered that these settings allowed me to send and recieve MMS. I did have a few problems though as the picture I had sent and recieved had become reduced in size :? This may have been caused by the original message size being too big so try keeping it less than 30K and see what happens. I only tried O2 MMS a couple of times so I can't tell you much more. I would start with sending and receiving MMS to yourself. Sending MMS to other mobiles or to a web address didn't seem to work although this could be general problem with O2. let us know if it works for you. MMS setup Create a new GPRS connection for MMS Description : O2 MMS Connects to : Orange MMS Access point: wap.o2.co.uk Username: o2wap Password: password Settings - Accessories - MMS setup First field: O2 MMS IP: 193.113.200.195 Port: 9201 Mmsc Address: http://mmsc.mms.o2.co.uk:8002
Guest jamzi Posted June 21, 2003 Report Posted June 21, 2003 tried those settings martin but not having any luck with them :lol:
Guest martin Posted June 21, 2003 Report Posted June 21, 2003 tried those settings martin but not having any luck with them errr thats cos I gave you the contract APN by mistake :oops: Here it is again :lol: I've just setup the O2 PAYG SIM on my phone today and sent 3 messages containing recorded sounds to myself so that bit still works. I'm not sure about sending it anywhere else cos I haven't tested it much. I also haven't checked what the charges are so watch out for that. MMS setup Create a new GPRS connection for MMS Description : O2 MMS Connects to : Orange MMS Access point: payandgo.o2.co.uk Username: payandgo Password: password Settings - Accessories - MMS setup First field: O2 MMS IP: 193.113.200.195 Port: 9201 Mmsc Address: http://mmsc.mms.o2.co.uk:8002
Guest jamzi Posted June 22, 2003 Report Posted June 22, 2003 Still cant get it to work even with those settings mate. Ive got a wee question for you martin, a couple of the wap sites i used to visit on my nokia 7650 (mopilot & wapocalypse), ive tried to visit on my spv but when i try to log in it doesnt. When i try to log into mopilot i get a screen telling me of an error and when i try to log into wapocalypse the screen just refreshes and i dont get any further than that. Do you know why this is? Is there a setting in the phone i need to change? Thanks for all your help mate :lol:
Guest martin Posted June 22, 2003 Report Posted June 22, 2003 Still cant get it to work even with those settings mate. Strange :? it works on my prepaid SIM - maybe I'm just lucky :wink: This should get you into those two sites. :lol: wsp://www.wapocalypse.com wsp://www.mopilot.com/wml/index.wml
Guest jamzi Posted June 22, 2003 Report Posted June 22, 2003 I got the mopilot one to work mate but the wapocalypse doesnt work. The same thing happens as before, the page just refreshes after ive put my username and password in and clicked login :lol:
Guest martin Posted June 22, 2003 Report Posted June 22, 2003 Wapocalypse works ok for me. (I told you I was lucky :lol: ) Try going to IE menu/options/memory and deleting ALL. After that go back to wsp://www.wapocalypse.com and try again If it still won't work try the full address wsp://www.wapocalypse.com/logincheck.php?login=name&password=password Change name and password to your login details.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now