Qtek7070 Update

[Guest sgtbadass]

Have tried to update my Qtek 7070 to 1.50.9.1 with out success..now my phone is empty... and when I run the upgradeprogram again it asks for another ROM image... does that mean that I need the original ROM? the version 1.42.9.2??? if so WHERE can I get it????????????

Or am I screwed????????????

PLZ help me!!!!!!!!!!!!!!

[Guest awarner [MVP]]

Welcome to the site :)

Re-run the update from the canary screen.

To get to the canary screen power off the phone then press and hold the

record button while pressing the power button.

When the phone starts to boot up release the keys and you should see

the three colour canary screen.

[Guest sgtbadass]

Thanx :)

Yeah ok.. tried that, just getting the error, Can't read ROM....

Tried again... same message!!!!!

I'm really screwed aren't I :x

[Guest NeilStewart]

Have you...

1) Rebooted the PC

2) Erased the IPSM

3) Removed the battery for 30 seconds

before trying to re-flash the phone?

[Guest awarner [MVP]]

With option 1, with the phone plugged in to the PC then reboot your PC

also try disabling your firewall if you use one.

Now try and re-run the update.

[Guest sgtbadass]

1) Yes

2)Yes

3)Yes

Still the "Error 104:cannot open the image ROM file, download the correct ROM and try again"

WHAT am I doing wrong... I cannot start the phone. it ends with the canary screen... nothing else... have tried to erase ipsm...succes... but when I restart, I get "gard found" then for a 3:rd of a sec, IPSM in red, then the "press any key to enter boot loader"...

WHAT.......C'MON..... I'll knock it the "#¤" out soon!!!!!!!!!!

[Guest awarner [MVP]]

Only a suggestion but in Task Manager end the wcescomm.exe process

and try again.

You should be able to upgrade from the canary screen.

Also in the advice above option 2, Is only needed after a successfull update

and Option 3, This is what you should do (and will be promted to do)

immediately after the update has been run.

Finally where are you located?

As a last resort, if you have a Qtek and was trying the official Qtek

update you may be able to take it back to the shop and get them to sort it

out.

[Guest ruhande]

I had a similar problem, but after I removed my sd card and started up as described above, it worked fine! I don't know if the card removal was the actual solution, but it is worth a try!