Help with setting up internet on Mitac Mio 8380

[Guest SuperCharger]

Hi, I just went to rogers and got this info, I put it in the phone but still wont connect, mabey someone can help me step by step. Here is the info

For WAP browsing on phones and other WAP devices:

1. APN: goam.com

2. URL or HomeDeck: http://mymobilehomepage.rogers.com

3. Username: wapuser1

4. Password: wap

5. Wap IP 1: 208.200.067.150

6. Wap Port 1: 9203

7. Wap IP 2: 208.200.067.151

8. Wap Port 2: 9201

For HTML browsing (Only a private IP address is required):

1. APN: internet.com

2. Username: wapuser1

3. Password: wap

4. DNS1: 207.181.101.4

5. DNS2: 207.181.101.5

6. Gateway: 172.31.44.254

[Guest martin]

Hi Supercharger

I think this is how you use the data supplied by rogers.

Create an GPRS connection for the Internet service (if subscribed).

Description: Rogers WEB

Connects to: The Internet

Access point: internet.com

Username: wapuser1

Password: wap

Primary DNS: 107.181.101.4

Secondary DNS: 207.181.101.5

IP address: (blank)

In Data connection make 'Internet Connection=Rogers WEB'.

In IE make 'Select network=The Internet'

Use http://(address) to access sites using the Internet connection.

The Internet service will allow HTML & WML browsing, E-mail, file downloads, data streaming etc. It should be unrestricted :lol:

If you are only subscribed to the WAP service then try the following.

Create GPRS connection for WAP.

Description: Rogers WAP

Connects to: The internet

Access point: goam.com

Username: wapuser1

Password: wap

Primary DNS: 0.0.0.0

Secondary DNS: 0.0.0.0

IP address (blank)

Create proxy connection for WAP.

Description: Rogers Proxy

Connects from: The Internet

Connects to: WAP Network

Proxy (name:port): 208.200.67.150:9203 or 208.200.67.151:9201

Type: WAP

Username: (blank)

Password: (blank)

In Data connections make 'WAP Connection: Rogers WAP'

In IE make 'Select Network: WAP network' and untick auto detect settings.

Use wsp://(address) to access sites using the WAP conenction.

The WAP service is limited and is mainly used for WML pages.

Hope its helps and more importantly I hope it works ;)

Good Luck

Martin