297 replies to this topic

[papeluv]

It worked great for me! Thanks!

Went from about 6-7 average before to about 17MB now!

Fyi as in a previous post, the new wings are preset a@ 8 instead of the former 12.

As long as you have a clue about the way your phone and computer works there shouldnt be any problem!

Thanks again!

17MB free
Using HomeScreen ++ overclocked at a stable 286Mhz
8gig microSD

[trosner]

I just want to say thank you.!

[manfred33]

Hey Paul!

Thanks so much for this procedure!! I am at best a novice at programming type stuff, but I followed your instructions to a 'T' and it worked great!!  I have almost 20 megs now on my Wing and that's awesome!!  I set the pagepool size on mine to 4mb, because when I checked the default size after downloading the dump files, it was already set to 8mb.  However, I just recently flashed the ROM with an updae from T-mobile, which helped with some of the quirks that I have encountered with this confounded thing and maybe that update reset the pagepool size to 8 mb.  And of course the memory naturally has always dogged this thing...  Anways, so far, it has run just fine with a pagepool of only 4mb.  Naturally, if I run into any problems, I will post an update...  I look forward to finding more of your helpful tips on improving the performance on the Wing.... Thanks again!

Manfred

BTW- if i should end up having issues, as long as my wing reboots, I should be able to just edit the dump file to 6 mb and rewrite it to my wing, correct?

[mmartini]

Hi guys,
I still have problems on my s730.
When I perform the rom-read, the standard command doesn't work. Looking on web I added some parameters like -b -h FLASHDR etc ...
and I was able to create my part02.dump file.
I changed it using the exe file for 6 Mb patch.
Now I cannot write the dumped file into my s730 since I'm having an error like: the device is not functioning.
This is the same error I had in reading rom, but I solved adding more parameters.
Now I'm not able to write files ....
Are there special features for S730??

[mmartini]

Nobody with these problems?

mmartini, on Mar 25 2009, 08:57, said:

Hi guys,
I still have problems on my s730.
When I perform the rom-read, the standard command doesn't work. Looking on web I added some parameters like -b -h FLASHDR etc ...
and I was able to create my part02.dump file.
I changed it using the exe file for 6 Mb patch.
Now I cannot write the dumped file into my s730 since I'm having an error like: the device is not functioning.
This is the same error I had in reading rom, but I solved adding more parameters.
Now I'm not able to write files ....
Are there special features for S730??

[richardalcock]

kinoons, on Jun 24 2007, 05:48, said:

Hello Paul, thanks for the work sofar. I am having some issues with getting the dump file.

Sofar I have ran the ROM unlocker and downloaded the pdocread file. When I run "pdocread -l" I get the following for my part 2
"50.63M <0x32a0000> Part02"

When I type "pdocread 0 0x32a0000 part02.dump" I get this response

copy TFFSToFile(0x0, 0x32a0000, part02.dump)
ERROR: ITReadDisk : Read 00000000 bytes - A device attached to the system is not functioning

And I don't get a part02.dump file. Any ideas? thanks!

Kinoons

[richardalcock]

Hi

Did you ever get a solution to this, I'm having the same problems?

Regards

Richard

kinoons, on Jun 24 2007, 05:48, said:

Hello Paul, thanks for the work sofar. I am having some issues with getting the dump file.

Sofar I have ran the ROM unlocker and downloaded the pdocread file. When I run "pdocread -l" I get the following for my part 2
"50.63M <0x32a0000> Part02"

When I type "pdocread 0 0x32a0000 part02.dump" I get this response

copy TFFSToFile(0x0, 0x32a0000, part02.dump)
ERROR: ITReadDisk : Read 00000000 bytes - A device attached to the system is not functioning

And I don't get a part02.dump file. Any ideas? thanks!

Kinoons

[relax98]

Hi Paul,

I want to extract a specific program from a ROM and pack it into a cab file so that I can install this program into another device. So far I have managed to dump the ROM into a dump folder but don't know how to proceed further. Your expertise is of great help!

Ray

[Jabib]

alrighty paul, if this works, i OWE YOU BIG!
right now, im at the step before soft ressetting.. waiting for the dump to finish
i really hope my fone doesnt get messed up lol
..
..
..
..
its been about 5-10minutes, now for the soft reset
..
..
..
done, my program  now says 51.9 mB total instead of like 43
thankoo

[Leviathon01]

Leviathon01, on May 5 2009, 14:09, said:

I get the same exact result when I execute 'pdocread -l' in my pagepool folder.  I don't know which hex value to use.  I have a Wing with WM6 Pro.  Thanks.

NM, the location for the Wing w/ WM6 is 0x37B55A.

[Homefish]

Nice!!

[beecee]

Hey buddy

I am new to this forum and new to the htc mobile era. i have the p3450 and i change the wm6.5 last week. i offen come accross the memory low message in wm6.5. today i go thro ur format to change the pagepool.

i found that mine is 2mb instead 8 or 12mb.  i change that in to 4mb. i soft reset my mobile all are going right sofar. will post after i use it a while how this is useful to come out from the memory low message. thank you for ur superb how to do it and the softwares.

will come back offen and post in this forum.

[softsr]

mmartini, on Mar 25 2009, 08:57, said:

Hi guys,
I still have problems on my s730.
When I perform the rom-read, the standard command doesn't work. Looking on web I added some parameters like -b -h FLASHDR etc ...
and I was able to create my part02.dump file.
I changed it using the exe file for 6 Mb patch.
Now I cannot write the dumped file into my s730 since I'm having an error like: the device is not functioning.
This is the same error I had in reading rom, but I solved adding more parameters.
Now I'm not able to write files ....
Are there special features for S730??

I have the same problem with my S730.


I could download page02 with following command:

   pdocread -w -d FLASHDR -b 0x800 -p Part02 0 0x4180000 Part02.raw

but can't find in downloaded file necessary string: no 'NKKD8', no 'FF FF FF FF FF FF FF FF 9B 4F FF FF 64 B0 00 00'.

The file patch T_MobileWingPagePool6MB also says:

   The file you selected to patch is not the samefile intended to patch...

but still working and make something with this downloaded Part02.raw (see attached file).

And of course I have no idea how to upload this file to phone, even when I make it right.

Attached Files

•  HxD.JPG   136.25K   31 downloads

[josheee12]

I hate to revive an old thread, but will flashing a new ROM remove the applications installed?

[HQDMX1]

HEY PAUL, IM TRYING TO DO THIS PAGEPOOL SIZE EDITING, I HAVE A WING, WHEN I GO TO COMMAND PROMPT AND TYPE IN 'PDOCREAD-L' IT DOES NOTHING. IVE DOWNLOADED THE CAB AND ZIP FILES YOU RECOMMENDED BUT I GET NOTHING. CAN YOU HELP, IM NEW TO THIS. THANX

Attached Files

•  pdocread.exe   104K   16 downloads

[Qi Xiao]

Hi Paul，

        Firstly, thank you for your guiding to change the pagepool.

            When i have it try in my device （HTC S1+）, the performance is not obvious. So i'm curious of your device type of HTC-Touch? Are you use HTC S1?

             Besides, when starting the command“pdocread -l”.Information are shown as the attachment. There is no “Part02” area like at your process.  Should i do the following with “Part01” seen in the picture of the  attachment.

               Thanks！Waiting for your reply.


accessory：
                  �__�__pdocread�__�__�__�_��__�__�__�__�_�.jpg   80.34K   13 downloads