2173 replies to this topic

[binh_hdda]

@ sonblack: please check rapid link, and password for unzip!
Thanks!

[spectralblade]

quizesilver, on Mar 29 2010, 10:13, said:

any starhub singapore user able to connect to gprs?

I can't connect as well after flashing. I believe its the JC rom issue. tried with both JC1 and JC2, gprs are not working even using the restore setting method.
What i did was to backup the registry settings in JB(1 or 2 or 3) version which was working and restore it back to JC2. Do a soft-reset and its working.

Thanks for the rom, sonblack.  

[Premjeeth]

Hey Sonblack, Great ROM... Thanks a lot....

[contable]

spectralblade, on Mar 29 2010, 06:46, said:

I can't connect as well after flashing. I believe its the JC rom issue. tried with both JC1 and JC2, gprs are not working even using the restore setting method.
What i did was to backup the registry settings in JB(1 or 2 or 3) version which was working and restore it back to JC2. Do a soft-reset and its working.

Thanks for the rom, sonblack.  

I can´t confirm that there is gprs connection issue. If there are any problems with gprs connection browse to windows folder and run adc.exe for auto-data-configuration. After that open startmenu choose settings/connections/connections and start "Automatically configure connection". That´s all.

Rom is running fast and smooth without any connection problems. Also Bluetooth, WiFi and GPS (quicker than hell) are running well.

[contable]

The discussion about the gprs configuration is really boring because it has been answered more than 1000 times here at modaco...   Fact is if the rom is working with one provider (in my case it´s working with T-Mobile Germany) it should work with all other providers, too.

[contable]

Another hint:

If the JMLToday buttons aren´t clickable after flashing do the following:

1. Press SK2 (Menu) , then Settings and Finally JMLPanexForPlugins
2. Choose JMLToday, than all or page1

Now the buttons should work.

[previa]

luisdiego, on Mar 29 2010, 04:53, said:

PART2 is offline, Megaupload say the file is temporary offline, and rapidshare the next error:

This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.

This limit is reached.

To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.

What happend with this?

I has been excited to test this new rom, please upload again.

Thanks

Here is the another download link from my account try it :
Part 1
http://rapidshare.co...black.part1.rar
Part 2
http://rapidshare.co...black.part2.rar

[previa]

Below photos are capture from this version ROM (WM65 ROM I8000HZHJC2 OS23551 PP16MB Sonblack)
comments : stable and fast .
I have installed a software "WINCE1" for my Regional setting ( Chinese Hong Kong S.A.R)

Attached Files

•  Screen01.jpg   86.11K   43 downloads
•  Screen02.jpg   73.42K   32 downloads
•  Screen03.jpg   57.44K   28 downloads
•  Screen04.jpg   58.28K   24 downloads
•  Screen06.jpg   61K   24 downloads
•  Screen07.jpg   84.15K   28 downloads
•  Screen08.jpg   67.19K   20 downloads
•  Screen09.jpg   77.66K   21 downloads
•  Screen11.jpg   81.11K   21 downloads
•  Screen12.jpg   55.55K   24 downloads
•  Screen13.jpg   84.51K   19 downloads
•  Screen14.jpg   84.02K   20 downloads
•  Screen15.jpg   78.61K   25 downloads
•  Screen17.jpg   34.8K   24 downloads
•  Screen18.jpg   84.3K   23 downloads
•  Screen19.jpg   89.84K   27 downloads

Edited by previa, 29 March 2010 - 07:02 AM.

[contable]

@previa: Thanks for uploading.

@Lancez: Are you back from Atlanta ? Buddy, you are a hardcore driver, too.

[previa]

I have installed another Titanium (gchris Titanium theme) sorry contable   Because it is simple to setting  

Attached Files

•  Screen20.jpg   92.35K   30 downloads
•  Screen21.jpg   86.02K   18 downloads
•  Screen23.jpg   53.36K   14 downloads
•  Screen24.jpg   100.65K   17 downloads
•  wallpaper.jpg   121.39K   32 downloads
•  wallpaperL.jpg   113.05K   21 downloads
•  Wallpapers.rar   230.82K   52 downloads

[bouboule]

Very beautiful and reactive rom

Is this possible to have the same ROm but light, without S2U2, JMLtoday etc ... like your ROMs SB12, 13 .....
Because we cannot remove this programs, they are all include in the ROM

I prefer have more RAM than all this, even its beautiful

And with cabs the one who wants S2U2, etc ... can install by himself.

Thanks again



Little Problem : I cannot use Fring like older roms (wifi mode : wifi ok, but don't connect to Fring, don't find the password and username screen and go back)

Edited by bouboule, 29 March 2010 - 07:31 AM.

[rickybalb]

@Sonblack, Great ROM very beautiful and fast.. Thanks a lot....

[quizesilver]

spectralblade, on Mar 29 2010, 13:46, said:

I can't connect as well after flashing. I believe its the JC rom issue. tried with both JC1 and JC2, gprs are not working even using the restore setting method.
What i did was to backup the registry settings in JB(1 or 2 or 3) version which was working and restore it back to JC2. Do a soft-reset and its working.

Thanks for the rom, sonblack.  

hi bro
which registry did u back up ??

[plguzman]

SB, looks like a great ROM. Unfortunately I need more RAM available :-/. It would be possible to release a "UltraLite" version of this ROM?

Cheers!

[contable]

@previa: install whatever you like, it´s your phone

@bouboule: I´m running fring right now. I´ve posted in Lancez´s thread how to set up fring

[quizesilver]

contable, on Mar 29 2010, 14:14, said:

The discussion about the gprs configuration is really boring because it has been answered more than 1000 times here at modaco...   Fact is if the rom is working with one provider (in my case it´s working with T-Mobile Germany) it should work with all other providers, too.

hi contable, i am sorry that u have to keep on repeating such "easy" solution.
a screen shot of my device. do not have this "adc.exe" under the window directory.

also
i am facing the same prob for all hong kong or taiwan base rom.
i am sure this has nothing to do with the cooker. as i tried stock rom also cant.

i am back to using GC JB3 base rom.

aside to spectralblade, can u try delete the "setting" and use the adc method if it works.

thanks

Attached Files

•  100329154154.png   38.94K   13 downloads

[contable]

quizesilver, on Mar 29 2010, 08:49, said:

hi contable, i am sorry that u have to keep on repeating such "easy" solution.
a screen shot of my device. do not have this "adc.exe" under the window directory.

also
i am facing the same prob for all hong kong or taiwan base rom.
i am sure this has nothing to do with the cooker. as i tried stock rom also cant.

i am back to using GC JB3 base rom.

aside to spectralblade, can u try delete the "setting" and use the adc method if it works.

thanks

Use Total Commander instead of File Explorer (or go to settings and enable all files) and you´ll find it. File Explorer doesn´t show up (hidden) system files by default.

Edited by contable, 29 March 2010 - 07:57 AM.

[contable]

Here 2 screenshots of my device:

 Screenshot_1.png   60.17K   17 downloads  Screenshot_2.png   47.45K   13 downloads

Best regards


contable

[bouboule]

contable, on Mar 29 2010, 08:48, said:

@previa: install whatever you like, it´s your phone

I've only between 44 and 25.26 MB free RAM. It's not enough for me and Igo8 refuse to start without soft reset for cleaning the ram
And we cannot remove all JML etc ... They are not listed in the "Remove programs"

contable, on Mar 29 2010, 08:48, said:

@bouboule: I´m running fring right now. I´ve posted in Lancez´s thread how to set up fring

Please where ?
i found a post lowcaller but not post for settings Fring
and found a post where you say u install Fring with Active Sync but i have the same problem :
Fring start, connect to the wifi network, but cannot go further

contable, on Mar 28 2010, 21:38, said:

@all: For getting full auto-data-configuration: start Total Commander, browse to windows folder and start adc.exe one time.

Click on adc.exe and ... don't start

Thanks for all

Edited by bouboule, 29 March 2010 - 10:24 AM.

[jhlee_0722]

contable, on Mar 29 2010, 14:23, said:

Another hint:

If the JMLToday buttons aren´t clickable after flashing do the following:

1. Press SK2 (Menu) , then Settings and Finally JMLPanexForPlugins
2. Choose JMLToday, than all or page1

Now the buttons should work.

the buttons below the clock are still unclickable.. instead of the supposed menus, the sk2 menu came out everytime i click them... pls advice. thx


 Screenshot_2.png   160.43K   17 downloads

Edited by jhlee_0722, 29 March 2010 - 10:23 AM.