any suggestion?
GPS fix for i8000 new
Started by
Darius P.
, Oct 05 2010 07:45 AM
#181
Posted 02 July 2011 - 09:51 AM
I'm using JJ1_6.5.3_21352_Sense_2018_Lite ROM but i never can lock my gps. its already show how many satelite, but take long time to lock and fail 
any suggestion?
any suggestion?
Omnia II
Speedfrog
JJ1_6.5.3_21352_Sense_2018_Lite
Phone_I8000XXJJ1
Speedfrog
JJ1_6.5.3_21352_Sense_2018_Lite
Phone_I8000XXJJ1
#182
Posted 25 July 2011 - 08:36 AM
Hi,
Am new to the forum, I have a Samsung Omnia 2. Never been flashed.
My issues are with GPS accuracy, I use Ndrive 10 with Maps on a micro SD Card, it usually gets me a lock in a few minutes cold, but I am OK with that. The problem is that the position keeps jumping, and it gets me lost while navigating. I don't use a data connection nor AGPS, & don't plan on using one.
Here are my Versions:-
CE 2.2.21883
Build - 21883.5.0.73.
I would like to know the following:-
Thanks
Am new to the forum, I have a Samsung Omnia 2. Never been flashed.
My issues are with GPS accuracy, I use Ndrive 10 with Maps on a micro SD Card, it usually gets me a lock in a few minutes cold, but I am OK with that. The problem is that the position keeps jumping, and it gets me lost while navigating. I don't use a data connection nor AGPS, & don't plan on using one.
Here are my Versions:-
- PDA - I8000JPJA4
- CSC - I8000XSGJA5
- Phone - I8000XXJA1
CE 2.2.21883
Build - 21883.5.0.73.
I would like to know the following:-
- Is there any patch / and settings I can do to improve the accuracy.
- Can I use an external Bluetooth GPS Receiver(with a better chip) to improve accuracy.
Thanks
#183
Posted 26 July 2011 - 05:39 AM
Vi_Ma, on 25 July 2011 - 08:36 AM, said:
Hi,
Am new to the forum, I have a Samsung Omnia 2. Never been flashed.
My issues are with GPS accuracy, I use Ndrive 10 with Maps on a micro SD Card, it usually gets me a lock in a few minutes cold, but I am OK with that. The problem is that the position keeps jumping, and it gets me lost while navigating. I don't use a data connection nor AGPS, & don't plan on using one.
Here are my Versions:-
CE 2.2.21883
Build - 21883.5.0.73.
I would like to know the following:-
Thanks
Am new to the forum, I have a Samsung Omnia 2. Never been flashed.
My issues are with GPS accuracy, I use Ndrive 10 with Maps on a micro SD Card, it usually gets me a lock in a few minutes cold, but I am OK with that. The problem is that the position keeps jumping, and it gets me lost while navigating. I don't use a data connection nor AGPS, & don't plan on using one.
Here are my Versions:-
- PDA - I8000JPJA4
- CSC - I8000XSGJA5
- Phone - I8000XXJA1
CE 2.2.21883
Build - 21883.5.0.73.
I would like to know the following:-
- Is there any patch / and settings I can do to improve the accuracy.
- Can I use an external Bluetooth GPS Receiver(with a better chip) to improve accuracy.
Thanks
change just phone part to XXJF1 or XXJJ1 and evrything with gps will be better.
read ROM section for that.
#184
Posted 22 October 2011 - 11:34 PM
Darius P., on 05 October 2010 - 07:45 AM, said:
LAST EDIT:
so final tweak, tested for 5 weeks- working fine. (need data plan)
maded some v/h acuratcy + reg. tweaks + new google server.
install (aGPS_final.cab)
soft resset.
(do not forget to use JF1 or JJ1 phone part)
rgds,
Darius
so all i need to do is install aGPS_final.cab to my device. then soft reset, and it should work?
thanks,
Jamie
#185
Posted 24 October 2011 - 05:45 AM
#186
Posted 05 November 2011 - 01:42 PM
the google agps server (supl.google.com) seemes to be changed to 74.125.79.192 ... Does it matter?
Edited by wm20320, 05 November 2011 - 02:04 PM.
#187
Posted 06 November 2011 - 02:50 PM
#188
Posted 08 November 2011 - 06:56 AM
#189
Posted 08 November 2011 - 11:38 AM
#190
Posted 12 December 2011 - 05:08 AM
yeyejulian80, on 02 November 2010 - 02:30 PM, said:
thank you so much for the agps cab. it locks me almost instantaneously under clear skies! works like a charm!
This worked great.. GPS has never been this easy for me before using the samsung_agps.cab
However i see there is a lag in communication or accuracy issue with MMI (Map My India).. most of the turnes are announced after i have gone pased the same by about 50 meters...
Edited by Sripada, 12 December 2011 - 05:09 AM.
#191
Posted 08 January 2012 - 01:37 PM
Darius P., on 05 October 2010 - 07:45 AM, said:
This replaces the default aGPS server to the
one GOOGLE aGPS server. This has been
found to dramaticaly increase GPS lock
speed! After applying this cab i get cold
Locks in about 20 seconds and warm gps
lock in under 15!
My stock JJ1 rom do not have aGPS settings. After that tweak my GPS lock works like a charm.
you can try to use on any rom, after uninstall everything goes back.
one GOOGLE aGPS server. This has been
found to dramaticaly increase GPS lock
speed! After applying this cab i get cold
Locks in about 20 seconds and warm gps
lock in under 15!
My stock JJ1 rom do not have aGPS settings. After that tweak my GPS lock works like a charm.
you can try to use on any rom, after uninstall everything goes back.
i hv wnmo 6.5 ....
if anythin else needed pls tell..
in above post i also red i ned to change phone to jx1....how do i do it?...
new to all dis... sry
Edited by Abhiraj4, 08 January 2012 - 01:42 PM.
#192
Posted 25 January 2012 - 02:46 AM
i have
PDA: I8000NXXJJ1
PHONE: I8000XXJJ1
so which cab should i download, aGPS_final_newip.cab right?
and after i installed that cab, do i still need to modify the agps setting like this?
1. dial *#1472365# for execute nogarder gps program.
2. click menu -> settings -> gps, change operation mode to 'MS-based' (default is 'Standalone', this is only for XTRA)
3. click menu -> settings -> GPRS (AGPS), input the google's server=> 74.125.113.192:7276
4. click menu -> settings -> security(AGPS), change SSL Setting to disabled.
5. click menu -> get position, this should connect to AGPS server to get the data, if everything work fine,you should get message like this:
SUPL Flow: Unkown Status
SUPL Flow:SUPL START
SUPL Flow:SUPL POS INIT
SUPL Flow:SUPL POS
SUPL Flow:SUPL END(0)
should i turn off XTRA? or leave it on? i have a data plan.
i also have quickgps lite v1.20 installed, should i remove it?
PDA: I8000NXXJJ1
PHONE: I8000XXJJ1
so which cab should i download, aGPS_final_newip.cab right?
and after i installed that cab, do i still need to modify the agps setting like this?
1. dial *#1472365# for execute nogarder gps program.
2. click menu -> settings -> gps, change operation mode to 'MS-based' (default is 'Standalone', this is only for XTRA)
3. click menu -> settings -> GPRS (AGPS), input the google's server=> 74.125.113.192:7276
4. click menu -> settings -> security(AGPS), change SSL Setting to disabled.
5. click menu -> get position, this should connect to AGPS server to get the data, if everything work fine,you should get message like this:
SUPL Flow: Unkown Status
SUPL Flow:SUPL START
SUPL Flow:SUPL POS INIT
SUPL Flow:SUPL POS
SUPL Flow:SUPL END(0)
should i turn off XTRA? or leave it on? i have a data plan.
i also have quickgps lite v1.20 installed, should i remove it?
#193
Posted 27 January 2013 - 04:43 PM
I tried almost every gps patches but nothing really work...so I decide to buy external BT gps Qstarz 1000X. From this moment I feel like in the Heaven 
#194
Posted 17 May 2013 - 12:43 PM
I tried the following settings on GT-I8000 (omnia2) gps with I8000NXXJI1 ROM (6.5.3) and Phone_I8000XXJJ1.bin
And... there's other method to enable AGPS like this:
1. dial *#1472365# for execute nogarder gps program.
2. click menu -> settings -> gps, change operation mode to 'MS-based' (default is 'Standalone', this is only for XTRA)
3. click menu -> settings -> GPRS (AGPS), input the google's server => 74.125.136.192:7276
4. click menu -> settings -> security (AGPS), change SSL Setting to disabled.
5. click menu -> get position, this should connect to AGPS server to get the data, if everything work fine, you should get message like this:
SUPL Flow: Unkown Status
SUPL Flow:SUPL START
SUPL Flow:SUPL POS INIT
SUPL Flow:SUPL POS
SUPL Flow:SUPL END(0)
after go to settings/network settings/gps/connection
change baud rate to 57600
enable automatic management of gps
leave the rest the same
click ok
then go to settings/network settings/gps/XTRA
enable xtra proxy
enable activesynq download
enable sntp server
download xtra data
Then open your gps program and see it lock instantly fastest than ever
i did nothing else
in case supl.google.com ip change visit http://dnslookup.fr/supl.google.com and change to new address
And... there's other method to enable AGPS like this:
1. dial *#1472365# for execute nogarder gps program.
2. click menu -> settings -> gps, change operation mode to 'MS-based' (default is 'Standalone', this is only for XTRA)
3. click menu -> settings -> GPRS (AGPS), input the google's server => 74.125.136.192:7276
4. click menu -> settings -> security (AGPS), change SSL Setting to disabled.
5. click menu -> get position, this should connect to AGPS server to get the data, if everything work fine, you should get message like this:
SUPL Flow: Unkown Status
SUPL Flow:SUPL START
SUPL Flow:SUPL POS INIT
SUPL Flow:SUPL POS
SUPL Flow:SUPL END(0)
after go to settings/network settings/gps/connection
change baud rate to 57600
enable automatic management of gps
leave the rest the same
click ok
then go to settings/network settings/gps/XTRA
enable xtra proxy
enable activesynq download
enable sntp server
download xtra data
Then open your gps program and see it lock instantly fastest than ever
i did nothing else
in case supl.google.com ip change visit http://dnslookup.fr/supl.google.com and change to new address
#195
Posted 20 May 2013 - 02:13 AM
No lucky for me. I did not get the message.
argentinos, on 17 May 2013 - 12:43 PM, said:
5. click menu -> get position, this should connect to AGPS server to get the data, if everything work fine, you should get message like this:
SUPL Flow: Unkown Status
SUPL Flow:SUPL START
SUPL Flow:SUPL POS INIT
SUPL Flow:SUPL POS
SUPL Flow:SUPL END(0)
SUPL Flow: Unkown Status
SUPL Flow:SUPL START
SUPL Flow:SUPL POS INIT
SUPL Flow:SUPL POS
SUPL Flow:SUPL END(0)
#196
Posted 20 May 2013 - 12:53 PM
You have the ROM versions i mentioned above ? if not please upgade or else you need more moddifications. It is good to have the latest versions
Also you have internet data package in use ?
also better to do the following settings
You open telephone menu and go to settings
then
settings/network settings/gps/connection
change baud rate to 57600
activate auto management of gps
leave the rest
click ok
After go to settings/network settins/gps/XTRA
activate xtra server
activate downloading via activesynq
activate sntp server
click on "get extra data", while your phone is connected via activesynq on your pc and has through your pc access to internet. (you can also activate the option "when data expire" but this may charge you if not have enough data package. if not you can simply renew your data through activesynq weekly
please make sure you also have a working sim in your phone
since you made all the above try again and i am sure you will succeed
many users also not not know their phone has faulty internet connection via mobile data, because they haven't selected auto setting internet settings when insert their sim to the phone or input the setting manually.
i hope i helped. if not give me more info to help you more
Also you have internet data package in use ?
also better to do the following settings
You open telephone menu and go to settings
then
settings/network settings/gps/connection
change baud rate to 57600
activate auto management of gps
leave the rest
click ok
After go to settings/network settins/gps/XTRA
activate xtra server
activate downloading via activesynq
activate sntp server
click on "get extra data", while your phone is connected via activesynq on your pc and has through your pc access to internet. (you can also activate the option "when data expire" but this may charge you if not have enough data package. if not you can simply renew your data through activesynq weekly
please make sure you also have a working sim in your phone
since you made all the above try again and i am sure you will succeed
many users also not not know their phone has faulty internet connection via mobile data, because they haven't selected auto setting internet settings when insert their sim to the phone or input the setting manually.
i hope i helped. if not give me more info to help you more
#197
Posted 20 May 2013 - 10:25 PM
@argentinos:
My rom is JI1, but my phone is JF1 (good one for brazil). Yep, I tried an internet data connection ON and no success. After, I tried with wifi connection. Same results.
In fact, after this hack, my gps app (iGO8) did not recognize the gps (I got a message: 'gps could not found'). No port was changed (always on COM7).
I tried 'MS-Assisted' instead 'MS-Based' but no success. And always with softreset (in fact, if I change to 'ms-assisted' and revert to 'standalone' the gps still not found by iGO; only after a softreset).
I think the only reason to the hack did not work properly is the difference between phone versions (JF1 instead JJ1).
My rom is JI1, but my phone is JF1 (good one for brazil). Yep, I tried an internet data connection ON and no success. After, I tried with wifi connection. Same results.
In fact, after this hack, my gps app (iGO8) did not recognize the gps (I got a message: 'gps could not found'). No port was changed (always on COM7).
I tried 'MS-Assisted' instead 'MS-Based' but no success. And always with softreset (in fact, if I change to 'ms-assisted' and revert to 'standalone' the gps still not found by iGO; only after a softreset).
I think the only reason to the hack did not work properly is the difference between phone versions (JF1 instead JJ1).
Edited by Hiroshi.Rio, 20 May 2013 - 10:30 PM.
#198
Posted 21 May 2013 - 12:45 PM
Hiroshi.Rio, on 20 May 2013 - 10:25 PM, said:
@argentinos:
My rom is JI1, but my phone is JF1 (good one for brazil). Yep, I tried an internet data connection ON and no success. After, I tried with wifi connection. Same results.
In fact, after this hack, my gps app (iGO8) did not recognize the gps (I got a message: 'gps could not found'). No port was changed (always on COM7).
I tried 'MS-Assisted' instead 'MS-Based' but no success. And always with softreset (in fact, if I change to 'ms-assisted' and revert to 'standalone' the gps still not found by iGO; only after a softreset).
I think the only reason to the hack did not work properly is the difference between phone versions (JF1 instead JJ1).
My rom is JI1, but my phone is JF1 (good one for brazil). Yep, I tried an internet data connection ON and no success. After, I tried with wifi connection. Same results.
In fact, after this hack, my gps app (iGO8) did not recognize the gps (I got a message: 'gps could not found'). No port was changed (always on COM7).
I tried 'MS-Assisted' instead 'MS-Based' but no success. And always with softreset (in fact, if I change to 'ms-assisted' and revert to 'standalone' the gps still not found by iGO; only after a softreset).
I think the only reason to the hack did not work properly is the difference between phone versions (JF1 instead JJ1).
I had JF1 phone before. In my opinion JJ1 is the same good if not better. just try it. if you do not want to change it, then read this thread from the beggining. you will have prior to the settings i mention to install aGPS_tweakwithdll.cab and FF_Ultimate_aGPS_Tweak_supl.google_Generic.cab
and later change google ip
i hope i helped
#199
Posted 22 May 2013 - 12:58 AM
@argentinos:
Today I updated my phone to JJ1 (sounds a good phone rom, with no problems at this time).
The first time that I tried to use this hack with JJ1 it didn't work. So I did a softreset and it worked. Really impressive! I tested with iGO and it tracked/found my place in seconds (and today is light rain and totally cloud).
I did few tests at now, but sometimes iGO does not recognize the gps. After a softreset it works. I am doing more tests to try to understand what's going on.
Anyway, thanks a lot. It is a very decent hack.
Nogarder GPS found my location (picture attached), and I didn't get message: SUPL Flow: Unkown Status, SUPL Flow:SUPL START, SUPL Flow:SUPL POS INIT, SUPL Flow:SUPL POS, SUPL Flow:SUPL END(0).
Today I updated my phone to JJ1 (sounds a good phone rom, with no problems at this time).
The first time that I tried to use this hack with JJ1 it didn't work. So I did a softreset and it worked. Really impressive! I tested with iGO and it tracked/found my place in seconds (and today is light rain and totally cloud).
I did few tests at now, but sometimes iGO does not recognize the gps. After a softreset it works. I am doing more tests to try to understand what's going on.
Anyway, thanks a lot. It is a very decent hack.
Nogarder GPS found my location (picture attached), and I didn't get message: SUPL Flow: Unkown Status, SUPL Flow:SUPL START, SUPL Flow:SUPL POS INIT, SUPL Flow:SUPL POS, SUPL Flow:SUPL END(0).
Edited by Hiroshi.Rio, 26 May 2013 - 11:22 PM.
#200
Posted 25 May 2013 - 01:34 PM
what version is your IGO ? 8.2 or 8.3 or primo ? better try 8.3 the most compatible. on IGO settings deactivate GPS and then scan again for GPS to have best compatibility results. also as far as i can see you use cooked ROM, so i am not sure if this ROM has any bugs. You tried again all that i mention on post 196 ? try installing a registry editor (sktools, resco explorer etc ) and check the registry if any problems there. i will try to copy/export my registry and publish it.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users







Sign In
Create Account


Back to top










