126 replies to this topic

[maedox]

Thank you very much for this! My phone is now flashed with the latest version, latest baseband, rooted and flashed CWM recovery.

[wapz]

maedox, on Mar 26 2011, 00:36, said:

Thank you very much for this! My phone is now flashed with the latest version, latest baseband, rooted and flashed CWM recovery.

same here :-) amazing times.

[vicsterscon]

Korumera, on Mar 25 2011, 22:36, said:

Hmmm,

just flashed my one with this ROM just to see what happens (i'm a very curious person) but now my phone keeps flashing on the LG screen is this normal? this happend after everything was sent to the phone.

Ok, handy to know after it reboots, remove the usb cable and put in battery lol

Mine did the same after updating the baseband, just pulled the usb cord after a cpl of "lg flashes", reinserted the battery and ping .. phone booting & working

[Batkoto]

Paul,

Can you add this bit for better understanding

Wait for flash to complete and device to reboot. Once CMD window dissapear, NV flashing is completed. Unplug the USB cable, insert the battery and power on the device.

cheers

Edited by Paul, 03 June 2011 - 10:38 AM.

[Fiddelito]

"Turn device off, remove battery, plug device in while holding volume up and down - screen will stay black but Windows will add a new 'APX' devices"


Should i run flash.bat when i am at this step if i already have the APX-drivers installed? OR should i just start the phone and enable USB Debugging and then run flash.bat?


Does V10b work for swedish phones?


One thing i wonder is when i check "Version info" for my phone, here in sweden, it says "SW Version LGP990-V10a"   and "factory version" says "LGP990AT-00-V10b-NEU-XXX-MAR-15-2011"

does that mean anything to you, more "into it", guys?

[maedox]

Fiddelito, on Mar 26 2011, 12:01, said:

"Turn device off, remove battery, plug device in while holding volume up and down - screen will stay black but Windows will add a new 'APX' devices"
Should i run flash.bat when i am at this step if i already have the APX-drivers installed? OR should i just start the phone and enable USB Debugging and then run flash.bat?
Does V10b work for swedish phones?
One thing i wonder is when i check "Version info" for my phone, here in sweden, it says "SW Version LGP990-V10a"   and "factory version" says "LGP990AT-00-V10b-NEU-XXX-MAR-15-2011"

does that mean anything to you, more "into it", guys?

If Windows is done with installing drivers just run flash.bat. I most probably have the same model as you (Norwegian/Nordic one) and it flashed fine. 10a/b/c shouldn't matter.

[Fiddelito]

maedox, on Mar 26 2011, 11:05, said:

If Windows is done with installing drivers just run flash.bat. I most probably have the same model as you (Norwegian/Nordic one) and it flashed fine. 10a/b/c shouldn't matter.

Aight, thank you!

Will a flash reset the phone?

[maedox]

Fiddelito, on Mar 26 2011, 12:43, said:

Aight, thank you!

Will a flash reset the phone?

I think it actually doesn't format the sdcard(s), but everything else is, so make a backup of everything important anyway.
The baseband flash (other sticky thread) formats everything, including the external sdcard.

[Korumera]

maedox, on Mar 26 2011, 12:38, said:

I think it actually doesn't format the sdcard(s), but everything else is, so make a backup of everything important anyway.
The baseband flash (other sticky thread) formats everything, including the external sdcard.

If you flash your phone with this version it WILL format your internal SD card. Your External SD card will be left intact. So when you try this, make sure you have a backup.

[tanoxxx]

tanoxxx, on Mar 25 2011, 19:10, said:

Hi Paul,
really thanks for your superb work!!
You are genius, seriously!!
Can you help me? Please?

You have release this rom stock, i I'd like to start to modding my default Dual, but before make that i must to safe  can  flash a original stock rom for my Dual..
The problem is, your rom is  v10b, but is not my rom stock of default , my rom is v10a, i have found this http://csmg.lgmobile..._00/V10A_00.kdz
How can flash it? or where i can found a  v10a for flashing with you procedure?

Thank Paul, i wait only found clarity for this step and after i will enjoy your great work...

Thansk
Ps. Sorry for bad english.

Hi Paul,
please, can you Help me?
I I'd like to enjoy your great work... but without  clarity  this step i can't
Thanks

Edited by tanoxxx, 26 March 2011 - 06:24 PM.

[maedox]

tanoxxx, on Mar 26 2011, 20:23, said:

Hi Paul,
please, can you Help me?
I I'd like to enjoy your great work... but without  clarity  this step i can't
Thanks

There's no difference, so you can flash 10b on 10a just fine. I did.

[tanoxxx]

Hi maedox

Thanks for the reply,

I understood there is not difference between V10a/b/c but for the Warranty if i need of assistance.. ??
I'd like to know If this rom is correct to warranty, i dont wanna lost my warranty, this is only a prblem...

[CashDroid]

When i "Turn device off, remove battery, plug device in while holding volume up and down - screen will stay black but Windows will add a new 'APX' devices"

nothing happens i turn off the device, plug device into usb (PC) and micro usb (lg) and holding volume up and down and power but not install the device driver!!! help me

[Le_PoUnT]

@CashDroid
The driver doesn't install itself, it must be installed manually.
As marked in the jmcnz tutorial, you should go in the device manager to install it manually.

http://android.modac...s-links-active/

[CashDroid]

Risolto TNX to alla

Edited by CashDroid, 27 March 2011 - 03:42 PM.

[Korumera]

tanoxxx, on Mar 27 2011, 13:20, said:

Hi maedox

Thanks for the reply,

I understood there is not difference between V10a/b/c but for the Warranty if i need of assistance.. ??
I'd like to know If this rom is correct to warranty, i dont wanna lost my warranty, this is only a prblem...

Just make a nandroid backup of your current version and put that on your pc's harddrive, like this you allways will have a version to flash back with clockworkmod in case you need to ship it back to LG for repairs.

[aMpeX]

does this also roll back to the stock recovery or will CWM still be present after this flash?

[Squide]

aMpeX, on Mar 27 2011, 16:38, said:

does this also roll back to the stock recovery or will CWM still be present after this flash?

CWM for sure, that's why I didn't do anything yet...
mine is a V10a... I need the original ROM for warranty reason.. before any progress could be done~

[cpootjes]

I did everything as told, and now I am looking at the screen of my PC where it says
Nvflash started
But nothing seems to happen, I am waiting 20 minutes now.

What is going on ???
Please help me.

PS
It worked after three times flashing.....

Edited by cpootjes, 27 March 2011 - 05:16 PM.

[tanoxxx]

Thanks to everybody, now i can enjoy the fantastic work of Paul
Really thanks