530 replies to this topic

[New Liquid Metal]

richarddwyer10, on 09 September 2011 - 07:47 AM, said:

http://android.modac...nal-USB-Devices


Have a look at this

Thanks for the info Richard

[richarddwyer10]

Does anyone know if this rom works on a v9 +

[kiting]

New Liquid Metal, on 09 September 2011 - 08:19 AM, said:

Mine is working fine, no problem.....did you try rebooting?

i try this rom for the second time, and now my home button work. thanx....

[pqdzung]

richarddwyer10, on 08 September 2011 - 06:09 AM, said:

Here is the latest hacked flash 10.1 works very well on this v9 I use everydayhttp://mail.qq.com/c...b39f29e&s=email

Richard, thank you, it works now with default and Dolphin browsers.


Regarding the Flash 10.2, I installed the honeycomb_install_flash_player_10.2.155.67.apk (attached).

regards,

PQdzung

Attached Files

•  honeycomb_install_flash_player_10.2.155.67.txt   4.24MB   91 downloads

[richarddwyer10]

pqdzung, on 12 September 2011 - 09:03 AM, said:

Richard, thank you, it works now with default and Dolphin browsers.


Regarding the Flash 10.2, I installed the honeycomb_install_flash_player_10.2.155.67.apk (attached).

regards,

PQdzung

Can you give me a link for 10.2 please

[pqdzung]

richarddwyer10, on 12 September 2011 - 09:59 PM, said:

Can you give me a link for 10.2 please

Richard, I did not quite remember the link once I had got the file, so I attached it to the previous reply - you just need to rename to .apk.


anyway looking at my browser history, it may be this link

http://androiddownlo...0-2-155-67/1295

although if you search by the filename honeycomb_install_flash_player_10.2, there are plenty.



PQDzung

[New Liquid Metal]

Hi,
Anyone have this problem of not being able to wake the Tab up after going to sleep(eg.screen goes off)? I seem to encounter this problem twice now and each time I have to remove the battery and perform a cold boot. I am on the new 0819 ROM......if anyone encounter this problem and knows of a fix, pls let me(us) know here....

Thanks

[richarddwyer10]

New Liquid Metal, on 16 September 2011 - 09:25 AM, said:

Hi,
Anyone have this problem of not being able to wake the Tab up after going to sleep(eg.screen goes off)? I seem to encounter this problem twice now and each time I have to remove the battery and perform a cold boot. I am on the new 0819 ROM......if anyone encounter this problem and knows of a fix, pls let me(us) know here....

Thanks

Do you have you're CPU minimum set to low? If it is set to low it can't wake up.I run mine flat out all the time 806mhz

[New Liquid Metal]

richarddwyer10, on 17 September 2011 - 05:06 AM, said:

Do you have you're CPU minimum set to low? If it is set to low it can't wake up.I run mine flat out all the time 806mhz

Hi, I am running at 245 when that issue occur, you are lucky to be able to get as high as 806! I can only go as far as 768, any higher causes my Tab to reboot....
I am slowly removing some spots to see if that is the cause.....

[richarddwyer10]

I have 2 that run at 806 and third one only runs at 748 .all these three don't have a problem going down to 245 but with such a big variation in top speed your v9 could have a problem. Btw I've had one v9 on an older build of cm7 only run at 768 and when I upgraded it went back up to 806

[Lassito]

Can I reset to factory condition without Clockwordmod easily or is that not possible? I have installed CyanogenMod-7.1.0-RC1-V9-Kang.

I will sell my zte v9 and have not backup the original rom.

Thx.

[New Liquid Metal]

@Lassito : I think there is a thread on the front page that will give you instructions to re-install back the stock ROM Froyo...

[ucdebz]

hey guys i got a major problem here.

i just installed the cm7 from the first post and well to say the calibration is off is the understatement of the year. when i go to select the power off i have to push on the opposite side of the screen, WTF?

[New Liquid Metal]

ucdebz, on 22 September 2011 - 07:27 AM, said:

hey guys i got a major problem here.

i just installed the cm7 from the first post and well to say the calibration is off is the understatement of the year. when i go to select the power off i have to push on the opposite side of the screen, WTF?

No big issue, go open up your main drawer, go to bottom and you should see an apps for screen calibration, do that and all will be fine(I am assuming you flashed the 0815 copy).....

[New Liquid Metal]

There is a new release ROM on the Swedish side (date 09-21), anyone tried it yet? Any feedback? Downloading now to try....

[richarddwyer10]

2011-09-21: Nothing new labeled. A little cosmetic differences in the sensor code. 2011-09-20: Använder2.6.35.7kärnan. Detendajag know that intefungerarär USB Host mode. Another novelty is that the sensor lib: a now egenkompilerad and g-sensor works better now, and games such as Shakya Tower Cubes Free is now possible to play.

[kallt_kaffe]

New Liquid Metal, on 22 September 2011 - 08:45 AM, said:

There is a new release ROM on the Swedish side (date 09-21), anyone tried it yet? Any feedback? Downloading now to try....

It's test builds with using the 2.6.35.7 kernel. Works very well but USB host mode has been disabled due to compile errors.

Also g-sensor games works better with this release.

[New Liquid Metal]

Thanks kaffe and Richard...download and flashed and all is good, USB host mode not important to me at the moment, but this new kernel  is good, everything seem lighter now, respond is quicker too!
Many many thanks to you kaffe!

[ucdebz]

hey guys i still can't get the data working iv'e changed apns and everything but i can't get 3g working still, any ideas?

[New Liquid Metal]

ucdebz, on 24 September 2011 - 09:42 AM, said:

hey guys i still can't get the data working iv'e changed apns and everything but i can't get 3g working still, any ideas?

Suggest to re-download the ROM again and reflash, always wipe.