3698 replies to this topic

[siggey]

thanks but I still can't access the site. is http://liquidnext.tk/ correct?

Edited by siggey, 25 January 2012 - 09:40 PM.

[marchetto9090]

After the fix the microphone (1.9.2), the sensitivity is too high, there is a way to lower it? Now I went back to 1.9.1 (but this is really too low sensitivity) The best thing would be a middle ground between the two versions. With 1.9.2 it is impossible to record video at concerts because the sound is too distorted, but with1.9.1 it feels great! Can someone help me? thanks

[padre.zack]

I can't usb tether... why?? before i click the usb tether it says it is connected but when i click on the usb tether this what exactly happen...
1. connect usb to pc and phone
2. open wireless and networks
3. open tethering and portable hotspot
4. select USB tethering
5. phone will unselect
6. no USB tethering

Any way to solve this? tried with 10 of my usb cables still the same....

Edited by padre.zack, 26 January 2012 - 03:14 PM.

[usju]

Me thinks the drivers for USB lan are not installed on your PC. You need an acknowledge signal from the PC ---> phone after the phone send a tether signal, otherwise it unselects by itself. ryt now i dont have drivers on my laptop, so later i'll post for you.

[renzs]

padre.zack, on 26 January 2012 - 03:13 PM, said:

I can't usb tether... why?? before i click the usb tether it says it is connected but when i click on the usb tether this what exactly happen...
1. connect usb to pc and phone
2. open wireless and networks
3. open tethering and portable hotspot
4. select USB tethering
5. phone will unselect
6. no USB tethering

Any way to solve this? tried with 10 of my usb cables still the same....

For me this was solved when I upgraded to 1.9.2
Also I'm using 4.002.14 EMEA GEN1 bin

~renzs

[zm3]

I have a battery issue, at night (8 hours) in plane mode it spent + -20% oferta battery and with network spent + -15%. Im using ln1.92. When im using ln1.6 informação plane mode spent only 2%, in normal mode spent 5%. Anyone can help?

[LuCa xD]

The battery drain is better with the. 08 bin than the. 14?

[kerri87]

Not able to send mms with rogers.I can receive them though?

[ozfunghi]

ozfunghi, on 21 January 2012 - 09:38 AM, said:

So after some time, i've also been getting these black screens, where i need to pull out the battery. This happens once in so many days/weeks.
My wifi icon doesn't seem to be working, most of the time it shows none of the bars filled, even if i have excellent connection.

Ok, i'm about to give up on this thing and go back to factory settings. It's almost every single day that i need to pull out the battery because the phone hangs. And frankly i've had it.

[renzs]

ozfunghi, on 02 February 2012 - 04:13 PM, said:

Ok, i'm about to give up on this thing and go back to factory settings. It's almost every single day that i need to pull out the battery because the phone hangs. And frankly i've had it.

Just checking.. what bin are you using because I don't have this problem with the 4.002.14_EMEA_GEN1 bin.. I'm using this rom as daily phone with no problems other than higher than normal battery use

~renzs

Edited by renzs, 04 February 2012 - 07:34 AM.

[akinov5]

Hi,
i have liquid s100. Now use liquidnext 1.9.2 but no overclock. 960 or 921 , 833 mhz overclock 5 second after screen not respond but phone stay open i remove the batery. i need help

Sorry for bad english

[Ma7moud]

akinov5, on 06 February 2012 - 01:31 PM, said:

Hi,
i have liquid s100. Now use liquidnext 1.9.2 but no overclock. 960 or 921 , 833 mhz overclock 5 second after screen not respond but phone stay open i remove the batery. i need help

Sorry for bad english

disable undervolted kernel from liquid next settings, or maybe its a hardware problem

[akinov5]

Ma7moud, on 06 February 2012 - 05:00 PM, said:

disable undervolted kernel from liquid next settings, or maybe its a hardware problem

no use undervolted kernel.  since two week it came from service . fix the hardware problem. change all hardware. before cpu max mhz 998, now 1200.

[mont0]

can anyone post a guide (summary steps) to flash a good ln on the liquid a1 (may be in the ln wiki )? going to read 179 pages of posts is quite long, for what i know it should be something like flash ln, flash undervolted kernel (link?) remove the a2sd of ln and install some other a2sd (which one, how?) is it right?
sorry for asking that but i really want to try this rom and with the default settings is not going very well.

Thanks in advance!

[Stangoesagain]

Go to the first post in this thread and click on the ROM page, we all have been using instructions from there.

[Stangoesagain]

Go to the first post in this thread and click on the ROM page, we all have been using instructions from there.

[kelu85]

hello...
when i'm using the a1, especially when i manage my apps and market, i receive this message very often:  "SORRY  system process doesnt reply.  <close> <wait> "   i'm using the last version of liq next,  with max cpu 921 Mhz-smartassv2 , jit-dithering-16bit transp- restore memory bitmap-force home&sms app all ON , heap VM 32M,  compcache disabled.
any hint?

Edited by kelu85, 08 February 2012 - 03:30 PM.

[kaerry]

kelu85, on 08 February 2012 - 03:28 PM, said:

hello...
when i'm using the a1, especially when i manage my apps and market, i receive this message very often:  "SORRY  system process doesnt reply.  <close> <wait> "   i'm using the last version of liq next,  with max cpu 921 Mhz-smartassv2 , jit-dithering-16bit transp- restore memory bitmap-force home&sms app all ON , heap VM 32M,  compcache disabled.
any hint?

It is normal, try to change sd with a faster sd.

Edited by kaerry, 08 February 2012 - 04:52 PM.

[Ma7moud]

kelu85, on 08 February 2012 - 03:28 PM, said:

hello...
when i'm using the a1, especially when i manage my apps and market, i receive this message very often:  "SORRY  system process doesnt reply.  <close> <wait> "   i'm using the last version of liq next,  with max cpu 921 Mhz-smartassv2 , jit-dithering-16bit transp- restore memory bitmap-force home&sms app all ON , heap VM 32M,  compcache disabled.
any hint?

i get that too and i don't know why

[siggey]

I'm on A1 with 256  mb of swap and no lag. The trick is to install the new v6 supercharger script from xda and use option number 6 and nitro lag nullifyer..

http://forum.xda-dev...ad.php?t=991276

Edited by siggey, 08 February 2012 - 05:11 PM.