Jump to content


Photo

Kernel Experiment - 4.0 updated 2012.05.28


  • Please log in to reply
198 replies to this topic

#181
bibubibu

bibubibu

    Newbie

  • Members
  • Pip
  • 12 posts
  • Gender:Male
  • Devices:samsung i8000
halo ipaq i found out bugs they are:
1)the camera's options small icon can't display well..
2) the cyanogenmod widget of 2g/3g button can't turn on after i turn off it once , evn can't disable it showing on widget bar
3)can't check my phone credit by dialing *122# (USSD code that to checking the credit balance of Maxis commnication in Malaysia), it just jump out into home after i dial this code.

sorry for my poor english and just want to inform you there are the bugs i found.hope you can solve it. thanks and appreciate your work~ have a nice day~ :)

  • 0

#182
nikkotsoi

nikkotsoi

    Enthusiast

  • Members
  • PipPipPip
  • 279 posts
2) the cyanogenmod widget of 2g/3g button can't turn on after i turn off it once , evn can't disable it showing on widget bar
for me it is working
however, i can take photo but nothing are saved
x)_x

  • 0

#183
bibubibu

bibubibu

    Newbie

  • Members
  • Pip
  • 12 posts
  • Gender:Male
  • Devices:samsung i8000

2) the cyanogenmod widget of 2g/3g button can't turn on after i turn off it once , evn can't disable it showing on widget bar
for me it is working
however, i can take photo but nothing are saved
x)_x


i'm using module 800mhz-133mhz-141mb-16bpp and get the camera issue that the camera option icon display something like interference, can't see the camera option properly.. i also found out that all kernel 4.0 also have the camera issue that all taken photos are saved in black...

  • 0

#184
Malakay

Malakay

    Newbie

  • Members
  • Pip
  • 5 posts
  • Devices:Omnia 2
Also happens to me, all taken photos are saved in black

  • 0

#185
Kannan Ramaswamy

Kannan Ramaswamy

    Newbie

  • Members
  • Pip
  • 13 posts
  • Devices:POCKET PC
Hi Ipaq,

what is the closest we can get to deploying JetDroid in Omnia2. I see JetDroid has reached ICS.
Is there a remote chance???


Regards

Kannan

  • 0

#186
pavel12.10

pavel12.10

    Newbie

  • Members
  • Pip
  • 1 posts
People need a good artist
1. Who is not difficult to throw off the full assembly instructions for the core i8000
2. Who is not difficult to throw off the full instructions for modifying init.cpio

  • 0

#187
synescu

synescu

    Regular

  • Members
  • PipPip
  • 112 posts
  • Gender:Male
  • Devices:Moto G XT1032
it seems that ipaq3970 threw his phone in the trash this summer holidays :D

  • 3

#188
Kannan Ramaswamy

Kannan Ramaswamy

    Newbie

  • Members
  • Pip
  • 13 posts
  • Devices:POCKET PC
Ive moved to a galaxy fone, so thank all guys for the great support and thrill ive enjoyed. Keep it up. Cheers.

Kannan

  • 0

#189
zappazz

zappazz

    Newbie

  • Members
  • Pip
  • 38 posts

...
After that I will be completely offline until probably some time in July.


Ehm ehm, September arrived :) passed over :unsure:
ipaq, let us know if you will keep improving this very good rom kernel.
Thanks!

Edited by zappazz, 28 September 2012 - 08:59 PM.

  • 0

#190
nikkotsoi

nikkotsoi

    Enthusiast

  • Members
  • PipPipPip
  • 279 posts

Ehm ehm, September arrived data:image/png;base64,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 passed over data:image/png;base64,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
ipaq, let us know if you will keep improving this very good rom kernel.
Thanks!

I am very worried if he is suffered in some accident or something :( :(
he is not online since june =[
Not even ONCE!~

  • 1

#191
如风手机

如风手机

    Newbie

  • Members
  • Pip
  • 1 posts
i8000用的怎么样

  • 0

#192
sam jason braddock

sam jason braddock

    Newbie

  • Members
  • Pip
  • 5 posts
  • Devices:samsung omnia II
Hi everyone.
Has anyone suceed in recompiling the kernel from source ?

I tried with ipaq's sources, the compilation works but the kernel does not boot. It remains on haret displaying "jumping to kernel"...
Sources are here : https://github.com/ipaq3870/o2droid
I used the default configuration script provided for omnia II on kernel 2.6.32

When I use the compiled kernel provided in the initial post, it works.
So my haret's configuration should be OK.

When I compile the old kernel_oII, it works, so my cross compilation should be ok...
So what's wrong ? Does anyone have a clue ?

  • 0

#193
rom_omnia2

rom_omnia2

    Enthusiast

  • Members
  • PipPipPip
  • 240 posts
  • Gender:Male
  • Devices:Omnia

Hi everyone.
Has anyone suceed in recompiling the kernel from source ?

I tried with ipaq's sources, the compilation works but the kernel does not boot. It remains on haret displaying "jumping to kernel"...
Sources are here : https://github.com/ipaq3870/o2droid
I used the default configuration script provided for omnia II on kernel 2.6.32

When I use the compiled kernel provided in the initial post, it works.
So my haret's configuration should be OK.

When I compile the old kernel_oII, it works, so my cross compilation should be ok...
So what's wrong ? Does anyone have a clue ?


I've been able to compile a working kernel from his source. I don't think any change was necessary, basically the default config have every feature disabled by default (24bpp driver, 166/Ahb, etc). It should at least get to the "Android on Omnia II loading" screen.

You can try to disable kexec (#CONFIG_KEXEC=y). Kexec may prevent the "jump" to the kernel sometimes due some bugs. But this bug only show up sometimes, it will work just by trying to boot again. To be honest i don't think kexec is the problem. You may also check the compiled kernel final size. I always had problems with kernels with 2.9mb+ size. I've solved most of the problems related with this by using the "official" arm-gcc from friendlyarm (friendlyarm.net/dl.php?file=arm-linux-gcc-4.4.3.tgz).

But tell me if you make it work, my compiled kernels from his sources doesn't have phone signal working, i have no clue why, phone works fine with his "official" compiled kernel.

  • 0

#194
sam jason braddock

sam jason braddock

    Newbie

  • Members
  • Pip
  • 5 posts
  • Devices:samsung omnia II

I've been able to compile a working kernel from his source. I don't think any change was necessary, basically the default config have every feature disabled by default (24bpp driver, 166/Ahb, etc). It should at least get to the "Android on Omnia II loading" screen.

You can try to disable kexec (#CONFIG_KEXEC=y). Kexec may prevent the "jump" to the kernel sometimes due some bugs. But this bug only show up sometimes, it will work just by trying to boot again. To be honest i don't think kexec is the problem. You may also check the compiled kernel final size. I always had problems with kernels with 2.9mb+ size. I've solved most of the problems related with this by using the "official" arm-gcc from friendlyarm (friendlyarm.net/dl.php?file=arm-linux-gcc-4.4.3.tgz).

But tell me if you make it work, my compiled kernels from his sources doesn't have phone signal working, i have no clue why, phone works fine with his "official" compiled kernel.


Hi,

I tried to disable kexec but it didn't change anything...

I am using arm-linux-gnueabi-gcc 4.6.3, maybe there's something to do with that.
I will give friendly arm 4.4.3 a try to tell you if there's something new.

The kernel size is around 2.7MB whih is a few bytes less than ipaq's kernel... So I don't think size is a problem here...

When I compiled the kernel in verbose mode, I noticed this in the link phase : arm-linux-gnueabi-ld -EL --defsym zreladdr=0x50008000 --defsym params_phys=0x50000100
Could it be an issue because haret ramaddr parameter is 0x50000000 (I tried 0x50008000 but there's no change - I also tried to force zreladdr to 0x50000000 but still no changes)...?

  • 0

#195
rom_omnia2

rom_omnia2

    Enthusiast

  • Members
  • PipPipPip
  • 240 posts
  • Gender:Male
  • Devices:Omnia

Hi,

I tried to disable kexec but it didn't change anything...

I am using arm-linux-gnueabi-gcc 4.6.3, maybe there's something to do with that.
I will give friendly arm 4.4.3 a try to tell you if there's something new.

The kernel size is around 2.7MB whih is a few bytes less than ipaq's kernel... So I don't think size is a problem here...

When I compiled the kernel in verbose mode, I noticed this in the link phase : arm-linux-gnueabi-ld -EL --defsym zreladdr=0x50008000 --defsym params_phys=0x50000100
Could it be an issue because haret ramaddr parameter is 0x50000000 (I tried 0x50008000 but there's no change - I also tried to force zreladdr to 0x50000000 but still no changes)...?


This ramaddr change doesnt make sense at all unless you are changing the source files. Are you sure that there's no errors on the compile log. Are you using this command bellow?

make zImage modules ARCH=arm CROSS_COMPILE=/opt/FriendlyARM/toolschain/4.4.3/bin/arm-none-linux-gnueabi-

On the end it should say "image ready" / "zimage ready". Any error and it would jump out before this message.




  • 0

#196
sam jason braddock

sam jason braddock

    Newbie

  • Members
  • Pip
  • 5 posts
  • Devices:samsung omnia II

This ramaddr change doesnt make sense at all unless you are changing the source files. Are you sure that there's no errors on the compile log. Are you using this command bellow?

make zImage modules ARCH=arm CROSS_COMPILE=/opt/FriendlyARM/toolschain/4.4.3/bin/arm-none-linux-gnueabi-

On the end it should say "image ready" / "zimage ready". Any error and it would jump out before this message.


Hi,
there were no errors on the log.
Anyway, I recompiled the kernel with "friendly arm 4.4.3" and it's now working perfectly !
I guess there's something incompatible with "arm-linux-gnueabi-gcc 4.6.3" but I really don't see what... (no specific error, and I was able to compile and boot the previous kern_oII (2.6.31 based) very well, so it is quite weird...).

Right now I am doing some experiments with raspbian on Omnia II :-) , so I cannot tell you yet if radio is working for me with the recompiled kernel.
But I will try the next fex days and tell you.

  • 0

#197
argentinos

argentinos

    Enthusiast

  • Members
  • PipPipPip
  • 176 posts
  • Gender:Male

i do not want to start a new thread since i am planning and already working on continuing this project.

i want to modernize this kernel in order to make our froyo ROM faster and make gingerbread ROM with more features to work.

there are many sources over the internet. we only need some volunteers. no need for advanced linux/programming knowledge. some free time and will to study a little is necessary of course.

 

volunteers can contribute here

https://github.com/argentinos/o2droid (fork from ipaq's job)

 

sources can be found here

https://github.com/a.../kernel-s5pc100

https://github.com/a..._samsung_omnia2

https://www.kernel.org/

http://opensource.sa...earchValue=m910

http://opensource.sa...earchValue=5800

https://github.com/a..._samsung_omnia2

http://omnia2droid.g....com/svn/trunk/

 

my last goal is to see latest version of 2.6 kernel on our phone. i do not think our old phone can ever execute 3.X kernel or run properly android ICS, JB etc

 

for those you dream about it can contibute on erikcas 3.0 kernel here

https://github.com/erikcas/spica-3.0


Edited by argentinos, 05 June 2014 - 11:19 PM.

  • 0

#198
rom_omnia2

rom_omnia2

    Enthusiast

  • Members
  • PipPipPip
  • 240 posts
  • Gender:Male
  • Devices:Omnia
I just installed CM 10.2 on this SH#T phone (also Armv6) for a friend: http://www.gsmarena....laxy_5-3371.php Isn't our omnia also Armv6? I don't know... i am still strong with my omnia 2, my only device... sometimes i still cry about, our phone have so much potential.

  • 0

#199
argentinos

argentinos

    Enthusiast

  • Members
  • PipPipPip
  • 176 posts
  • Gender:Male

yes,both phones are armv6. just i8000 has s3c6410 chipset and i5500 has Qualcomm MSM7227 . chek here http://pdadb.net/ind...orby_smartphone. we can port at least ics on our phone too, i5700 spica and samsung transform (both s3c6410 too) have but with poor functionality). so even if do it  it will work only as pda because of no drivers. qualcommm chipset phones have the best drivers support


  • 0




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users