66 replies to this topic

[maritimesbob]

Hpez, on 05 July 2012 - 08:55 PM, said:

I've tried in booted normally and whilst in fastboot neither worked for me but that could be the freakishly unkillable unicom splash I seem to be stuck with and not the app itself.

Anyone else tried this?

Yep, still stuck with the unicom splash.

[Pondlife]

Don't do the vendor bit too it actually makes it worse, the second boot logo gets changed to one with noise as well as picture

[PeaceMaker_H]

Pondlife, on 05 July 2012 - 11:59 PM, said:

Don't do the vendor bit too it actually makes it worse, the second boot logo gets changed to one with noise as well as picture

You don´t need vendor for that, i´ve flashed without and on my first boots got that logo...

after restoring imei all changed..

[pelago]

Geno.Kolar, on 05 July 2012 - 04:47 PM, said:

This is a tool，help you change the logo on G300

you need：
1. install ADB drivers from the ISO mounted on the phone, enable USB debugging and then connect USB cable - make sure adb works.
2. prepare a 480*800 jpg picture
3. make sure you phone is root(will push files to /data)
3. run tool “changelogo.exe"
4. select picture
5. wait tool change logo


i test in Miuiv4,it's work fine.[ HUAWEI U8800/C8812/U8818]

IMG_20120706_072253.jpg

http://sourceforge.n...EN.exe/download

Geno, Do you have the source code for this available? I couldn't find anything in your sourceforge git or svn.

[andy.hyde4]

Just to let people know for this to work you must use Geno's MIUI v4

[ugnius40]

I'm using Paul's kitchen ICS rom, and have just successfuly changed boot logo to huawei with this tool.

Thanks Geno.

[andy.hyde4]

well it didnt work for me on Huawei's ICS so tried it on MIUI worked and went back to Official and was still there

[Cyda]

andy.hyde4, on 07 July 2012 - 01:05 PM, said:

well it didnt work for me on Huawei's ICS so tried it on MIUI worked and went back to Official and was still there

Nice one, Andy. I can confirm this works and I've finally got rid of that grim white/orange unicom logo.

I made a nandroid backup then flashed MIUI and used this tool to change the splash. Then booted back in to CWM, restored my backup and I'm back in ICS with my custom splash screen. Sweeet!

[FrankieADZ]

Hpez, on 07 July 2012 - 03:28 PM, said:

Nice one, Andy. I can confirm this works and I've finally got rid of that grim white/orange unicom logo.

I made a nandroid backup then flashed MIUI and used this tool to change the splash. Then booted back in to CWM, restored my backup and I'm back in ICS with my custom splash screen. Sweeet!

seems like alot of faffing about for a custom screen dont it

[Hans Gruber]

I've now tried it on stock ICS, Paul's Ir1 and now MIUI and the icon won't change. I don't think I'm ever getting rid of it

[Cyda]

FrankieADZ, on 07 July 2012 - 03:51 PM, said:

seems like alot of faffing about for a custom screen dont it

Agreed but its changed now and I won't be changing it again. lol

I am still not sure why I was unable to change prior to flashing MIUI but I did notice that MIUI flashed a new boot.img so I assume that was something to do with it.

[Rico_89]

Hpez, on 07 July 2012 - 03:28 PM, said:

Nice one, Andy. I can confirm this works and I've finally got rid of that grim white/orange unicom logo.

I made a nandroid backup then flashed MIUI and used this tool to change the splash. Then booted back in to CWM, restored my backup and I'm back in ICS with my custom splash screen. Sweeet!
7

I'm tempted to try this but I don't really want to trouble trouble to be honest as you only see the splash screen for a couple of seconds.

Edited by Rico_89, 07 July 2012 - 05:06 PM.

[nobrakes666]

Help!
Have upgraded phone to ICS and all worked well phone was fine - then I got overconfident......In an attempt to get rid of the oem logo I applied the vendor update - now my phone boots into the CWM menu and displays the message -
CWM-based Recovery v4.0.1.5
E:invalid command argument
The phone was stuck in a loop - just booted into the CWM screen every time.
I was able to mount the SD card & reload the main update file - Rebooting whilst pressing both volume buttons forced the update to re run and the phone now boots OK - Now I have a load of bloat and the two changed splash screens ........ How do I get back to just having the main update without the vendor bloat?

Martyn

Edited by nobrakes666, 13 July 2012 - 01:24 PM.

[Hans Gruber]

Oh I didn't know this had been updated. I just gave it a try and now have a green android as my boot logo Thanks Geno

[Cyda]

Hans Gruber, on 13 July 2012 - 02:05 PM, said:

Oh I didn't know this had been updated. I just gave it a try and now have a green android as my boot logo Thanks Geno

Yeah, its a nice update. Thank you, Geno.

[HuaweiAscend]

Does anyone have a JPG of the original Huawei image?

[Rico_89]

Still doesn't work for me . Is there a .jpg size limitation or file name I should be using or is still a case of install MIUI first then this procedure will work?

[droiddruid]

This does nothing for me either on stock 926 which according to edit on the first post should work.

Can someone upload a.jpg that has worked successfully so I can rule out any issues with the images I have tried thus far?

Thanks in advance.

Edited by droiddruid, 14 July 2012 - 06:29 PM.

[Hans Gruber]

I just tried to change my logo again and it's not working so it seems a bit temperamental. Not sure what I did last time to make it work

The logo I changed mine to is http://dl.dropbox.co...ndroid-logo.jpg

Edited by Hans Gruber, 14 July 2012 - 06:41 PM.

[Ellis456q]

Didnt work for me, using stock ICS. still have that annoying crappy unicom logo .