Guest elf69 Posted July 12, 2012 Report Share Posted July 12, 2012 OK so I been having issues with the ICS ROM on here. Im sure its the tablet as it works with others tablets. I first had viewcomb on it which all worked great, but ISC is opening up a few more features for me, like sending SMS (MMS dont work for me). Is there a way to format the nand fully? I think maybe bits are left from viewcomb and its upsetting my ISC install. Anyone else have ideas? Even though I have flashed with Viewcomb again the USB STILL will not work for me, although it will power a device if in host mode. I flashed it again with ISC Beta3 and still no usb :( I NEED USB! please can someone help me? Link to comment Share on other sites More sharing options...
Guest IanTurner Posted July 12, 2012 Report Share Posted July 12, 2012 Have you had it working in USB host mode with viewcomb before you flashed vegacream ? Link to comment Share on other sites More sharing options...
Guest elf69 Posted July 12, 2012 Report Share Posted July 12, 2012 yes it did. but after upgrading to ICS no usb at all. now even flashing back to viewcomb no usb. but it WILL power a device if i switch to host. It it software or is my USB port duff? I have a viewsonic dock but cannot remember where i put it to test the USB on that.... Link to comment Share on other sites More sharing options...
Guest Daedric1383 Posted July 13, 2012 Report Share Posted July 13, 2012 Are you nvflashing or cwm flashing ? Link to comment Share on other sites More sharing options...
Guest elf69 Posted July 13, 2012 Report Share Posted July 13, 2012 doing it via PC so NV once flashed the USB WILL work in PC mode and PC will see the SD card. Link to comment Share on other sites More sharing options...
Guest Daedric1383 Posted July 13, 2012 Report Share Posted July 13, 2012 It's just Host Mode ??? Try to erase system ,cache, and data from CWR, then flash FROM CWR. NVflash erases and recreates partitions, deleting all info about bad sectors. By formating from CWM, bad sectors info is remained. Link to comment Share on other sites More sharing options...
Guest elf69 Posted July 26, 2012 Report Share Posted July 26, 2012 yeah just host mode. everything else works great! Link to comment Share on other sites More sharing options...
Guest Daedric1383 Posted July 26, 2012 Report Share Posted July 26, 2012 Ok, do this: With VegaCream in SLAVE mode, open a terminal and do: su cat /proc/kmsg open shuttle tools, switch to host, and attach a device.. like a USB mouse. Try to copy the result and post it... or you could cat /proc/kmsg > /sdcard/kmsg.log Also, i would try to: Flash VegaCream via NVFlash, but also copy it to the sdcard. Boot, and then reboot to recovery. Then: 1- Erase /data and /cache (factory restore) 2- Flash VegaCream, 3- Goto 1 Do this a few times.. and retest. You might have BAD blocks. NVFlash erases that info, CWM format doesn't. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now