133 replies to this topic

[dentot]

**********************************

Edited by dentot, 11 February 2013 - 01:20 PM.

[C3C0]

Update drivers manually according to my guide I wrote earlier.

[dentot]

********************************

Edited by dentot, 11 February 2013 - 01:20 PM.

[C3C0]

What about using hardware buttons to get into recovery?
(Volume- + power-on, Volume+ + power-on, ...)

[dentot]

*************************

Edited by dentot, 11 February 2013 - 01:21 PM.

[C3C0]

Check windows device manager while dragon picture is there.
By the way. Where does that dragon come from?
That rom you tried reflashed your recovery???

[dentot]

**************************8

Edited by dentot, 11 February 2013 - 01:21 PM.

[C3C0]

Too bad.
Try with: Volume- + Home + Power on
This could luckily get you to bootloader. From there you can flash cwm recovery using fastboot (flash-clockworkmod.bat you did previously)

Edited by C3C0, 20 November 2012 - 06:51 AM.

[dentot]

**************

Edited by dentot, 11 February 2013 - 01:23 PM.

[C3C0]

Have you tried to go to device manager and update driver manually?

[dentot]

****************

Edited by dentot, 11 February 2013 - 01:22 PM.

[dentot]

**********

Edited by dentot, 11 February 2013 - 01:23 PM.

[C3C0]

I don't know anything about SP flash tool.

My advice is to try all possible key combinations. And everytime check device manager. I believe that one of the combinations must get you to the bootloader so
you can see your device as "ZTE composite ADB interface" in device manager (or Android device).

[dentot]

************

Edited by dentot, 11 February 2013 - 01:24 PM.

[C3C0]

On my phone I can get into bootloader using keys this way.

1) Turn off the phone
2) hold Home and Volume- and power on. When it vibrates/red light is on, release power button and continue holding Vol- and Home for a while

You can also try the same steps but using Volume+ instead of Volume-

You mus do this with USB cable unplugged

Edited by C3C0, 20 November 2012 - 07:30 AM.

[dentot]

**********

Edited by dentot, 11 February 2013 - 01:24 PM.

[dentot]

**********************

Edited by dentot, 11 February 2013 - 01:25 PM.

[C3C0]

The problem is that the ROM you tried to install rewrote your cwm recovery.

ui_print("Flashing Recovery");
package_extract_file("recovery.img", "/dev/block/mmcblk0p13");

Custom ROMs should NEVER do that since every user has it's own version of recovery
he prefers. This means your recovery has been reflashed with incompatible one... You could ask author of the ROM what you could do about it. Maybe they have some tricks for Warp that could work on Skateplus.

[C3C0]

dentot, on 20 November 2012 - 07:47 AM, said:

i think, when it go on black screen its on ftm mode

Yes it is. But we don't have a system image available to be flashed in FTM mode. Nothing on ZTE sites.
Even your Flash tool you tried earlier said that there are no updates. But you can give it a try again.

[dentot]

*******************

Edited by dentot, 11 February 2013 - 01:25 PM.