ZTE Skate 4.3 H

[Guest dentot]

**********************************

Edited February 11, 2013 by dentot

[Guest C3C0]

Update drivers manually according to my guide I wrote earlier.

[Guest dentot]

********************************

Edited February 11, 2013 by dentot

[Guest C3C0]

What about using hardware buttons to get into recovery?

(Volume- + power-on, Volume+ + power-on, ...)

[Guest dentot]

*************************

Edited February 11, 2013 by dentot

[Guest C3C0]

Check windows device manager while dragon picture is there.

By the way. Where does that dragon come from?

That rom you tried reflashed your recovery???

[Guest dentot]

**************************8

Edited February 11, 2013 by dentot

[Guest C3C0]

Too bad.

Try with: Volume- + Home + Power on

This could luckily get you to bootloader. From there you can flash cwm recovery using fastboot (flash-clockworkmod.bat you did previously)

Edited November 20, 2012 by C3C0

[Guest dentot]

**************

Edited February 11, 2013 by dentot

[Guest C3C0]

Have you tried to go to device manager and update driver manually?

[Guest dentot]

****************

Edited February 11, 2013 by dentot

[Guest dentot]

**********

Edited February 11, 2013 by dentot

[Guest C3C0]

I don't know anything about SP flash tool.

My advice is to try all possible key combinations. And everytime check device manager. I believe that one of the combinations must get you to the bootloader so

you can see your device as "ZTE composite ADB interface" in device manager (or Android device).

[Guest dentot]

************

Edited February 11, 2013 by dentot

[Guest C3C0]

On my phone I can get into bootloader using keys this way.

1) Turn off the phone

2) hold Home and Volume- and power on. When it vibrates/red light is on, release power button and continue holding Vol- and Home for a while

You can also try the same steps but using Volume+ instead of Volume-

You mus do this with USB cable unplugged

Edited November 20, 2012 by C3C0

[Guest dentot]

**********

Edited February 11, 2013 by dentot

[Guest dentot]

**********************

Edited February 11, 2013 by dentot

[Guest C3C0]

The problem is that the ROM you tried to install rewrote your cwm recovery.

ui_print("Flashing Recovery");

package_extract_file("recovery.img", "/dev/block/mmcblk0p13");

Custom ROMs should NEVER do that since every user has it's own version of recovery

he prefers. This means your recovery has been reflashed with incompatible one... You could ask author of the ROM what you could do about it. Maybe they have some tricks for Warp that could work on Skateplus.

[Guest C3C0]

i think, when it go on black screen its on ftm mode

Yes it is. But we don't have a system image available to be flashed in FTM mode. Nothing on ZTE sites.

Even your Flash tool you tried earlier said that there are no updates. But you can give it a try again.

[Guest dentot]

*******************

Edited February 11, 2013 by dentot

[Guest C3C0]

Maybe you could try ZTE online upgarding tool while your phone is in FTM mode (DFU interface)

[Guest dentot]

*************************

Edited February 11, 2013 by dentot

[Guest dentot]

********************

Edited February 11, 2013 by dentot

[Guest dentot]

**************************

Edited February 11, 2013 by dentot

[Guest C3C0]

Try installing these drivers: http://ceco.sk.eu.org/omc/P020121004052853514271.zip

to see if the "Unknown device" while on dragon logo will disappear.

But I am already quite skeptic here.

I should've warn you that you should be very careful when flashing not-verified roms designed for other devices.

But I thought you are aware of the consequences.

Simply bad luck you picked one that rewrites the recovery...