Jump to content
pass25

[CM7] [gen1/gen2] Latest CM7 2.3.7 ROMs

Recommended Posts

Hello, yes I wiped everything.

I went back today to do a complete wipe and installed it again and keep up the problem.

the home button and answer the calls does not work.

detected during the wipe in the log that generated some errors of bad blocks, do not know if it is derived that gives the installation problems, but i dont tink so ...

what version of the recovery cmd is that you use??

exprimentei the two that give the same error. the sd-ext does not format because it is not found.

here is the result of the log:

Starting recovery on Thu Jul 26 10:55:25 2012

framebuffer: fd 4 (240 x 320)

ClockworkMod Recovery v4.0.1.0

recovery filesystem table

=========================

0 /tmp ramdisk (null) (null)

1 /recovery mtd recovery (null)

2 /boot mtd boot (null)

3 /misc mtd misc (null)

4 /cache yaffs2 cache (null)

5 /system yaffs2 system (null)

6 /data yaffs2 userdata (null)

7 /sdcard vfat /dev/block/mmcblk0p1 /dev/block/mmcblk0

8 /sd-ext auto /dev/block/mmcblk0p2 (null)

I:Completed outputting fstab.

I:Processing arguments.

mtd: successfully wrote block at c3a6c00000000

I:Set boot command "boot-recovery"

I:Checking arguments.

I:device_recovery_start()

Command: "/sbin/recovery"

ro.secure=0

ro.allow.mock.location=0

ro.debuggable=1

persist.service.adb.enable=1

ro.modversion=clockwork-4.0.1.0-mooncake

ro.product.device=mooncake

ro.product.name=P726B

usb.default.pid=0x1354

persist.usb.default.pid=0x1354

ro.build.date=Sun Jul 17 05:40:19 PDT 2011

ro.build.datei.utc=1307898540

ro.build.owner=sebastian404

ro.build.url=http://android.podtwo.com/

ro.factorytest=0

ro.serialno=

ro.bootmode=unknown

ro.baseband=unknown

ro.carrier=unknown

ro.bootloader=unknown

ro.hardware=mooncakeztehandset

ro.revision=0

ro.emmc=0

init.svc.usbconfig=stopped

init.svc.recovery=running

init.svc.adbd=running

I:Checking for extendedcommand...

I:Skipping execution of extendedcommand, file not found...

mtd: successfully wrote block at c3a6c00000000

I:Set boot command ""

/tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. Please open ROM Manager to report the issue.

mtd: successfully wrote block at c3a6c00000000

I:Set boot command ""

-- Wiping data...

Formatting /data...

mtd: not erasing bad block at 0x000c0000

mtd: not erasing bad block at 0x02960000

mtd: not erasing bad block at 0x02980000

mtd: not erasing bad block at 0x034a0000

mtd: not erasing bad block at 0x09de0000

mtd: not erasing bad block at 0x0a920000

mtd: not erasing bad block at 0x0ab00000

mtd: not erasing bad block at 0x0f100000

mtd: not erasing bad block at 0x10380000

mtd: not erasing bad block at 0x10720000

Formatting /cache...

Formatting /sd-ext...

I:Formatting unknown device.

No app2sd partition found. Skipping format of /sd-ext.

Formatting /sdcard/.android_secure...

I:Formatting unknown device.

Data wipe complete.

Fixing execute permissions for /cache

mtd: successfully wrote block at c3a6c00000000

I:Set boot command ""

-- Wiping cache...

Formatting /cache...

Cache wipe complete.

Fixing execute permissions for /cache

mtd: successfully wrote block at c3a6c00000000

I:Set boot command ""

Formatting /boot...

Done.

Formatting /cache...

Done.

Formatting /system...

mtd: not erasing bad block at 0x01c40000

mtd: not erasing bad block at 0x07a40000

Done.

Formatting /data...

mtd: not erasing bad block at 0x000c0000

mtd: not erasing bad block at 0x02960000

mtd: not erasing bad block at 0x02980000

mtd: not erasing bad block at 0x034a0000

mtd: not erasing bad block at 0x09de0000

mtd: not erasing bad block at 0x0a920000

mtd: not erasing bad block at 0x0ab00000

mtd: not erasing bad block at 0x0f100000

mtd: not erasing bad block at 0x10380000

mtd: not erasing bad block at 0x10720000

Done.

Formatting /sd-ext...

I:Formatting unknown device.

No app2sd partition found. Skipping format of /sd-ext.

Done.

Fixing execute permissions for /cache

mtd: successfully wrote block at c3a6c00000000

I:Set boot command ""

-- Wiping data...

Formatting /data...

mtd: not erasing bad block at 0x000c0000

mtd: not erasing bad block at 0x02960000

mtd: not erasing bad block at 0x02980000

mtd: not erasing bad block at 0x034a0000

mtd: not erasing bad block at 0x09de0000

mtd: not erasing bad block at 0x0a920000

mtd: not erasing bad block at 0x0ab00000

mtd: not erasing bad block at 0x0f100000

mtd: not erasing bad block at 0x10380000

mtd: not erasing bad block at 0x10720000

Formatting /cache...

Formatting /sd-ext...

I:Formatting unknown device.

No app2sd partition found. Skipping format of /sd-ext.

Formatting /sdcard/.android_secure...

I:Formatting unknown device.

Data wipe complete.

Fixing execute permissions for /cache

mtd: successfully wrote block at c3a6c00000000

I:Set boot command ""

-- Wiping cache...

Formatting /cache...

Cache wipe complete.

Fixing execute permissions for /cache

mtd: successfully wrote block at c3a6c00000000

I:Set boot command ""

Fixing execute permissions for /data

mount: mounting /dev/block/mmcblk0p2 on /sd-ext failed: No such file or directory

rm: can't remove '/data/dalvik-cache': No such file or directory

rm: can't remove '/cache/dalvik-cache': No such file or directory

rm: can't remove '/sd-ext/dalvik-cache': No such file or directory

Dalvik Cache wiped.

I'm not an expert but I think your nand chip is corrupted because all bad blocks are from it. You can try to restore FTM mode and use official TMN software to restore the rom,then you can flash CWM again. But if I were you I wait a little bit for more opinions before restore FTM mode and install the original tmn software.

Edited by lfernandes

Share this post


Link to post
Share on other sites

Hello, yes I wiped everything.

I went back today to do a complete wipe and installed it again and keep up the problem.

the home button and answer the calls does not work.

detected during the wipe in the log that generated some errors of bad blocks, do not know if it is derived that gives the installation problems, but i dont tink so ...

what version of the recovery cmd is that you use??

exprimentei the two that give the same error. the sd-ext does not format because it is not found.

here is the result of the log:

Starting recovery on Thu Jul 26 10:55:25 2012

framebuffer: fd 4 (240 x 320)

ClockworkMod Recovery v4.0.1.0

recovery filesystem table

=========================

0 /tmp ramdisk (null) (null)

1 /recovery mtd recovery (null)

2 /boot mtd boot (null)

3 /misc mtd misc (null)

4 /cache yaffs2 cache (null)

5 /system yaffs2 system (null)

6 /data yaffs2 userdata (null)

7 /sdcard vfat /dev/block/mmcblk0p1 /dev/block/mmcblk0

8 /sd-ext auto /dev/block/mmcblk0p2 (null)

I:Completed outputting fstab.

I:Processing arguments.

mtd: successfully wrote block at c3a6c00000000

I:Set boot command "boot-recovery"

I:Checking arguments.

I:device_recovery_start()

Command: "/sbin/recovery"

ro.secure=0

ro.allow.mock.location=0

ro.debuggable=1

persist.service.adb.enable=1

ro.modversion=clockwork-4.0.1.0-mooncake

ro.product.device=mooncake

ro.product.name=P726B

usb.default.pid=0x1354

persist.usb.default.pid=0x1354

ro.build.date=Sun Jul 17 05:40:19 PDT 2011

ro.build.datei.utc=1307898540

ro.build.owner=sebastian404

ro.build.url=http://android.podtwo.com/

ro.factorytest=0

ro.serialno=

ro.bootmode=unknown

ro.baseband=unknown

ro.carrier=unknown

ro.bootloader=unknown

ro.hardware=mooncakeztehandset

ro.revision=0

ro.emmc=0

init.svc.usbconfig=stopped

init.svc.recovery=running

init.svc.adbd=running

I:Checking for extendedcommand...

I:Skipping execution of extendedcommand, file not found...

mtd: successfully wrote block at c3a6c00000000

I:Set boot command ""

/tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. Please open ROM Manager to report the issue.

mtd: successfully wrote block at c3a6c00000000

I:Set boot command ""

-- Wiping data...

Formatting /data...

mtd: not erasing bad block at 0x000c0000

mtd: not erasing bad block at 0x02960000

mtd: not erasing bad block at 0x02980000

mtd: not erasing bad block at 0x034a0000

mtd: not erasing bad block at 0x09de0000

mtd: not erasing bad block at 0x0a920000

mtd: not erasing bad block at 0x0ab00000

mtd: not erasing bad block at 0x0f100000

mtd: not erasing bad block at 0x10380000

mtd: not erasing bad block at 0x10720000

Formatting /cache...

Formatting /sd-ext...

I:Formatting unknown device.

No app2sd partition found. Skipping format of /sd-ext.

Formatting /sdcard/.android_secure...

I:Formatting unknown device.

Data wipe complete.

Fixing execute permissions for /cache

mtd: successfully wrote block at c3a6c00000000

I:Set boot command ""

-- Wiping cache...

Formatting /cache...

Cache wipe complete.

Fixing execute permissions for /cache

mtd: successfully wrote block at c3a6c00000000

I:Set boot command ""

Formatting /boot...

Done.

Formatting /cache...

Done.

Formatting /system...

mtd: not erasing bad block at 0x01c40000

mtd: not erasing bad block at 0x07a40000

Done.

Formatting /data...

mtd: not erasing bad block at 0x000c0000

mtd: not erasing bad block at 0x02960000

mtd: not erasing bad block at 0x02980000

mtd: not erasing bad block at 0x034a0000

mtd: not erasing bad block at 0x09de0000

mtd: not erasing bad block at 0x0a920000

mtd: not erasing bad block at 0x0ab00000

mtd: not erasing bad block at 0x0f100000

mtd: not erasing bad block at 0x10380000

mtd: not erasing bad block at 0x10720000

Done.

Formatting /sd-ext...

I:Formatting unknown device.

No app2sd partition found. Skipping format of /sd-ext.

Done.

Fixing execute permissions for /cache

mtd: successfully wrote block at c3a6c00000000

I:Set boot command ""

-- Wiping data...

Formatting /data...

mtd: not erasing bad block at 0x000c0000

mtd: not erasing bad block at 0x02960000

mtd: not erasing bad block at 0x02980000

mtd: not erasing bad block at 0x034a0000

mtd: not erasing bad block at 0x09de0000

mtd: not erasing bad block at 0x0a920000

mtd: not erasing bad block at 0x0ab00000

mtd: not erasing bad block at 0x0f100000

mtd: not erasing bad block at 0x10380000

mtd: not erasing bad block at 0x10720000

Formatting /cache...

Formatting /sd-ext...

I:Formatting unknown device.

No app2sd partition found. Skipping format of /sd-ext.

Formatting /sdcard/.android_secure...

I:Formatting unknown device.

Data wipe complete.

Fixing execute permissions for /cache

mtd: successfully wrote block at c3a6c00000000

I:Set boot command ""

-- Wiping cache...

Formatting /cache...

Cache wipe complete.

Fixing execute permissions for /cache

mtd: successfully wrote block at c3a6c00000000

I:Set boot command ""

Fixing execute permissions for /data

mount: mounting /dev/block/mmcblk0p2 on /sd-ext failed: No such file or directory

rm: can't remove '/data/dalvik-cache': No such file or directory

rm: can't remove '/cache/dalvik-cache': No such file or directory

rm: can't remove '/sd-ext/dalvik-cache': No such file or directory

Dalvik Cache wiped.

I agree with @lfernandes ... You should have the nand with errors...

I also had that problem with /sd-ext ... wouldn't format..

What I did to fix that, it was backup SDcard, and complete delete all partitions. Next I used CWM to create the partitions and restored (copied) the backup I had made from SD.

I'm using photom_cwm_fastboot_racer

Share this post


Link to post
Share on other sites

Hello all here the link for anable the swap on sd-ext

http://www.taringa.n...n-Mod-7_10.html

I installed it and worked well fine

to install must be done manually with explorer root and must give the permissions as in the pics

one more thing in file 06mountsd must rename it to 05mountsd

post-722639-0-71249100-1343368330.png

post-722639-0-02148200-1343368418.png

post-722639-0-74150800-1343368450.png

Edited by sack3
  • Upvote 1

Share this post


Link to post
Share on other sites

sorry guys, ive been busy with irl stuff, ill check out what you wrote and will wait for next release to give you, will also check these swap scripts you suggested :)

  • Upvote 2

Share this post


Link to post
Share on other sites

hey.... equiliym . ur rom is best, but

just problem having. serious, 3d hd new games. not work, I think egl problem, and just in touch problem, and phone apk, showing big icons, and plz, enable multi touch support in nexrt release, for better gamec experience .....

thanks for support green.. racer isnt really suited up for 3d hd games so i cant help you much.. i can make you a flashable zip with other/older egl drivers if you want to experiment which ones work best for you..

for phone.apk, i know it shows bigger icons, it goes retarded when i convert it to mdpi sadly, images get broken, you can see example other users had so i dont think ill mess with that any time now, too much work to fix it every week for new release :(

and as for multitouch, you should install deadlinks kernel since its a kernel based feature, deadlink made that hack in his kernel while vamshi didnt want to do it, that might give you better experiance in gaming :)

hope these help

@pass25 i know, ive been busy these days and next release is due for tomorrow so ill just wait one more day for a newer one

@sack3 you dont need sd speed tweak, i already included it for best sd read performance set to 4096 p; im checking that script now to see if it can be autostarted but im not sure whats with those apps from market @[email protected]

edit: also, regarding to swap, have you tried this method? you can make swap file on sdcard with terminal emulator and use swapon/swapoff commands for it.. here is an example of how to make it on sdcard:

su

dd if=/dev/zero of=/sdcard/swap.file bs=1024 count=102400

mkswap /sdcard/swap.file

you use this code to create swap file on sdcard of size 100mb, you can use any size regarding of your sdcard size (ie 100*1024=102400, 256*1024=262144 etc) after that you use swapon and swapoff to turn on/off your swap:
swapon /sdcard/swap.file

swapoff /sdcard/swap.file

you can also make it on /sd-ext if you have it partitioned, doesnt really matter i guess.. unless you mount the whole /sd-ext as swap which is somewhat better imho but app2sd uses /sd-ext so i guess going with swap file is better in this way.. try it, might work without 3rd party apps/scripts do note that swap can drain your battery faster edit2: ok here is example from my cmd how i activated it via adb from windows
C:\Workfolder\apktool>adb shell

# su

# free -m

			 total		 used		 free	   shared	  buffers

Mem:		166408	   162596		 3812			0		   56

-/+ buffers:			 162540		 3868

Swap:			0			0			0

# cd /sd-ext

# ls


# dd if=/dev/zero of=/sd-ext/swap.file bs=1024 count=102400

102400+0 records in

102400+0 records out

104857600 bytes transferred in 37.626 secs (2786838 bytes/sec)

# mkswap /sd-ext/swap.file

Setting up swapspace version 1, size = 104853504 bytes

# swapon /sd-ext/swap.file

# free -m

			 total		 used		 free	   shared	  buffers

Mem:		166408	   163072		 3336			0		 1752

-/+ buffers:			 161320		 5088

Swap:	   101136		  536	   100600

# ls -la /sd-ext/swap.file

--w--w----	1 root	 root	 104857600 Jul 28 15:04 /sd-ext/swap.file

#

before we activated swap:

Swap: 0 0 0

after we activated swap:

Swap: 101136 536 100600

so swap works without 3rd party apps/scripts

Edited by equiliym
  • Upvote 1

Share this post


Link to post
Share on other sites

can you tell me what cm7-2.3.x rom did you use to play 3D HD games? if you give me a rom where it worked ill take those egl drivers i guess

  • Upvote 1

Share this post


Link to post
Share on other sites

i cant use egl drivers from 2.2 on 2.3.. and since we have no source on egl drivers and all using prebuilt ones from unknown sources i suggest you try some of racerboys 2.3 roms, maybe he is using different egl from the ones i use..

  • Upvote 1

Share this post


Link to post
Share on other sites

ARMv6=ARM11, ARM Cortex-M, its the same thing

and yeah all cm7 egl drivers are pretty much prebuilt so i guess there cant be no changes :(

  • Upvote 1

Share this post


Link to post
Share on other sites

thanks for support green.. racer isnt really suited up for 3d hd games so i cant help you much.. i can make you a flashable zip with other/older egl drivers if you want to experiment which ones work best for you..

for phone.apk, i know it shows bigger icons, it goes retarded when i convert it to mdpi sadly, images get broken, you can see example other users had so i dont think ill mess with that any time now, too much work to fix it every week for new release :(

and as for multitouch, you should install deadlinks kernel since its a kernel based feature, deadlink made that hack in his kernel while vamshi didnt want to do it, that might give you better experiance in gaming :)

hope these help

@pass25 i know, ive been busy these days and next release is due for tomorrow so ill just wait one more day for a newer one

@sack3 you dont need sd speed tweak, i already included it for best sd read performance set to 4096 p; im checking that script now to see if it can be autostarted but im not sure whats with those apps from market @[email protected]

edit: also, regarding to swap, have you tried this method? you can make swap file on sdcard with terminal emulator and use swapon/swapoff commands for it.. here is an example of how to make it on sdcard:

su

dd if=/dev/zero of=/sdcard/swap.file bs=1024 count=102400

mkswap /sdcard/swap.file

you use this code to create swap file on sdcard of size 100mb, you can use any size regarding of your sdcard size (ie 100*1024=102400, 256*1024=262144 etc) after that you use swapon and swapoff to turn on/off your swap:
swapon /sdcard/swap.file

swapoff /sdcard/swap.file

you can also make it on /sd-ext if you have it partitioned, doesnt really matter i guess.. unless you mount the whole /sd-ext as swap which is somewhat better imho but app2sd uses /sd-ext so i guess going with swap file is better in this way.. try it, might work without 3rd party apps/scripts do note that swap can drain your battery faster edit2: ok here is example from my cmd how i activated it via adb from windows
C:\Workfolder\apktool>adb shell

# su

# free -m

			 total		 used		 free	   shared	  buffers

Mem:		166408	   162596		 3812			0		   56

-/+ buffers:			 162540		 3868

Swap:			0			0			0

# cd /sd-ext

# ls


# dd if=/dev/zero of=/sd-ext/swap.file bs=1024 count=102400

102400+0 records in

102400+0 records out

104857600 bytes transferred in 37.626 secs (2786838 bytes/sec)

# mkswap /sd-ext/swap.file

Setting up swapspace version 1, size = 104853504 bytes

# swapon /sd-ext/swap.file

# free -m

			 total		 used		 free	   shared	  buffers

Mem:		166408	   163072		 3336			0		 1752

-/+ buffers:			 161320		 5088

Swap:	   101136		  536	   100600

# ls -la /sd-ext/swap.file

--w--w----	1 root	 root	 104857600 Jul 28 15:04 /sd-ext/swap.file

#

before we activated swap:

Swap: 0 0 0

after we activated swap:

Swap: 101136 536 100600

so swap works without 3rd party apps/scripts

Hi,

I'm using a old swap file I had and since last version activate that way.

What I don't know how to do is, activate automatically on boot ( I guess something have to wait to sdcard be mounted before activate) and use a partition instead of a file.

I also see the battery drains much faster since I activate swap.. with the last rom (120715) before use swap my phone last 2 or even 3 days, and now with swap it's for a one day only (thing that don't upset me ... I do not mind having to recharge every day)

Share this post


Link to post
Share on other sites

Hi,

I'm using a old swap file I had and since last version activate that way.

What I don't know how to do is, activate automatically on boot ( I guess something have to wait to sdcard be mounted before activate) and use a partition instead of a file.

I also see the battery drains much faster since I activate swap.. with the last rom (120715) before use swap my phone last 2 or even 3 days, and now with swap it's for a one day only (thing that don't upset me ... I do not mind having to recharge every day)

yeah, when you boot your phone it first loads internal partitions and all and when android starts it must first mount sdcard and init.d scripts runs before bootlogo so thats messing up.. i also prefer to use partition instead of file but it still doesnt load at start.. i kind of like it that way, i only swapon when needed, i use v6 script with optimal performance so my phone doesnt lag, swap is last resort..

im downloading geno's rom to see his conf for custom script for swap and sdext since i used it from lewa rom and in lewa rom there is no conf file lol..

edit: not gonna use this script -.-'

Edited by equiliym
  • Upvote 2

Share this post


Link to post
Share on other sites

hello,

Lewa the roms are not based on CM7?

if they say the games run spectacular, perhaps copying the files from the egl Lewa and adapting to our solve the problem ... I do not know.

Share this post


Link to post
Share on other sites

what has been fixed, in new released. plz fast replay.

fixes since 21020715:

I81ea0739 squashed commit for 1.20.2-cm7 (MERGED) Tanguy Pruvot CyanogenMod/android_external_busybox gingerbread Jul 18

Iefcee6d9 libaudio-msm7x30: TI FM Radio support (MERGED) Giulio Cervera CyanogenMod/android_hardware_msm7k gingerbread Jul 17

I749cbbbc Czech: added missing strings (MERGED) Ondrej Zima CyanogenMod/android_packages_apps_Settings gingerbread Jul 17

I7f8b9a6a umount: instead of non-standard -D, use -d with opposite meaning (MERGED) Tanguy Pruvot CyanogenMod/android_external_busybox gingerbread Jul 16

pretty much nothing for racer

Edited by equiliym
  • Upvote 2

Share this post


Link to post
Share on other sites

phone.apk problem not solved.... big icons and number pad, duriing call.

for phone.apk, i know it shows bigger icons, it goes retarded when i convert it to mdpi sadly, images get broken, you can see example other users had so i dont think ill mess with that any time now, too much work to fix it every week for new release :(

  • Upvote 1

Share this post


Link to post
Share on other sites

try deadlinks kernel, i already told you, he has that touch-to-zoom and multitouch hack in his kernel, you have it on the first post

###

deadlink gen1/gen2 kernel patch can be downloaded from here

* for those who want to try different touch sensitivity and performance

Edited by equiliym
  • Upvote 1

Share this post


Link to post
Share on other sites

what is swap?

its somewhat of a virtual memory.. you need to format your sdcard in recovery to make /sd-ext and then you can activate swap via terminal, make it at least 128mb for 100mb swap file and random data

Edited by equiliym
  • Upvote 1

Share this post


Link to post
Share on other sites

thanks for support green.. racer isnt really suited up for 3d hd games so i cant help you much.. i can make you a flashable zip with other/older egl drivers if you want to experiment which ones work best for you..

for phone.apk, i know it shows bigger icons, it goes retarded when i convert it to mdpi sadly, images get broken, you can see example other users had so i dont think ill mess with that any time now, too much work to fix it every week for new release :(

and as for multitouch, you should install deadlinks kernel since its a kernel based feature, deadlink made that hack in his kernel while vamshi didnt want to do it, that might give you better experiance in gaming :)

hope these help

@pass25 i know, ive been busy these days and next release is due for tomorrow so ill just wait one more day for a newer one

@sack3 you dont need sd speed tweak, i already included it for best sd read performance set to 4096 p; im checking that script now to see if it can be autostarted but im not sure whats with those apps from market @[email protected]

edit: also, regarding to swap, have you tried this method? you can make swap file on sdcard with terminal emulator and use swapon/swapoff commands for it.. here is an example of how to make it on sdcard:

su

dd if=/dev/zero of=/sdcard/swap.file bs=1024 count=102400

mkswap /sdcard/swap.file

you use this code to create swap file on sdcard of size 100mb, you can use any size regarding of your sdcard size (ie 100*1024=102400, 256*1024=262144 etc) after that you use swapon and swapoff to turn on/off your swap:
swapon /sdcard/swap.file

swapoff /sdcard/swap.file

you can also make it on /sd-ext if you have it partitioned, doesnt really matter i guess.. unless you mount the whole /sd-ext as swap which is somewhat better imho but app2sd uses /sd-ext so i guess going with swap file is better in this way.. try it, might work without 3rd party apps/scripts do note that swap can drain your battery faster edit2: ok here is example from my cmd how i activated it via adb from windows
C:\Workfolder\apktool>adb shell

# su

# free -m

			 total		 used		 free	   shared	  buffers

Mem:		166408	   162596		 3812			0		   56

-/+ buffers:			 162540		 3868

Swap:			0			0			0

# cd /sd-ext

# ls


# dd if=/dev/zero of=/sd-ext/swap.file bs=1024 count=102400

102400+0 records in

102400+0 records out

104857600 bytes transferred in 37.626 secs (2786838 bytes/sec)

# mkswap /sd-ext/swap.file

Setting up swapspace version 1, size = 104853504 bytes

# swapon /sd-ext/swap.file

# free -m

			 total		 used		 free	   shared	  buffers

Mem:		166408	   163072		 3336			0		 1752

-/+ buffers:			 161320		 5088

Swap:	   101136		  536	   100600

# ls -la /sd-ext/swap.file

--w--w----	1 root	 root	 104857600 Jul 28 15:04 /sd-ext/swap.file

#

before we activated swap:

Swap: 0 0 0

after we activated swap:

Swap: 101136 536 100600

so swap works without 3rd party apps/scripts

with swap on the card dont work conected to usb? right?

this tuturial does not work for me

http://www.taringa.net/ADVERTISING SPAM/lg-optimus-me/4185835/_Tutorial_-Activar-SWAP-en-Cyanogen-Mod-7_10.html

he aborts the operation because is no longer suported!

Edited by pass25

Share this post


Link to post
Share on other sites

with swap on the card dont work conected to usb? right?

this tuturial does not work for me

http://www.taringa.n...n-Mod-7_10.html

he aborts the operation because is no longer suported!

usb works fine completely.. not sure if you need to do swapon again after mounting sdcard to pc tho.. like i said i use it only when i need it because it drains battery faster that way.. as for that other tutorial, it can rewrite some settings if you tried it.. didnt really manage to test it fully since i didnt understand but didnt work for me either so i dunno lol

  • Upvote 1

Share this post


Link to post
Share on other sites

plz.... say any one, I have to play avator the game, but they game support multi touch to run and jump one place. to another palace, plz any rom or kernal, for multitouch...plz plz...

please install deadlinks kernel for this, i told you 3 times already, deadlinks kernel has multitouch hack enabled, link is on first post and few post back, on top of this page.. here, let me copy it for you one more time:

deadlink gen1/gen2 kernel patch can be downloaded from here

* for those who want to try different touch sensitivity and performance

  • Upvote 1

Share this post


Link to post
Share on other sites

yes, that is cm7 2.3.x kernel for racer, it will work, just flash via recovery and you`re done

  • Upvote 1

Share this post


Link to post
Share on other sites

good, working on multitouch test app, its show two color, by tap two finger, but its, multitouch very low.

only 1%working on games and pinch zoom... has to develop more.

......

any one developing this kernal or not..

I am very happy to se multitouch ... on my phone.

you can go on www.4pda.ru forum and find deadlink, its his kernel, he was developing it

  • Upvote 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.