Diamond Hologram on Omnia2 ?

[Guest Cyberpictures]

Hey

I was wondering if there is any way to get the VR Diamond Hologram runing on the i8000.

I hope there is no similar thread here, I searched for a while now and couldn't find any solution.

Thanks

Just to let you know what I'm talking about:

Edited December 26, 2009 by Cyberpictures

[Guest sekobati]

Hey

I was wondering if there is any way to get the VR Diamond Hologram runing on the i8000.

I hope there is no similar thread here, I searched for a while now and couldn't find any solution.

Thanks

Just to let you know what I'm talking about:

id like to see that too :)

[Guest Ender Psp]

Hey

I was wondering if there is any way to get the VR Diamond Hologram runing on the i8000.

I hope there is no similar thread here, I searched for a while now and couldn't find any solution.

Thanks

Just to let you know what I'm talking about:

Anyone, please? It's a really nice app and the source code is available for the programmers out there.

[Guest superdarkyaya]

Incredible !!!!!!!!!!!!!!!!!!!!!!!!!!

[Guest Cyberpictures]

Okay as far as i can tell by the app needs direct 3d to run witch isn't supported by Omnia2.

But since it runs on various HTC phones, maybe the HTCsensorsdk.dll could help. I've already tested this option but this doesn't work eighter. Maybe with some changes in the hologram app .. could one of the programmers here try, please?

[Guest calolobo]

well by accident or hope i was looking for d3d (direct x), i installed "SJ SamsungOmnia_Driver_D3D" (the installer is intended to omnia i900 ), take it from xda forum, maybe is in here too, miraculously it works, also some examples of d3d, hologram is fast enough ( before drivers it doesn't work), but maybe those old drivers are not enough to forget samsung lack of interest or capacity to develop correct drivers.

my ROM PDA is nxxjd1 and csc eurjd4, winmo 6.5.3 , and also i think it includes framework 3.7.

i don't know if there are other 3d application that work or enhanced with this drivers, but with Xtrakt or Cops and Robbers is just the same apparently, works like before.

Edited May 6, 2010 by calolobo

[Guest Ender Psp]

well by accident or hope i was looking for d3d (direct x), i installed "SJ SamsungOmnia_Driver_D3D" (the installer is intended to omnia i900 ), take it from xda forum, maybe is in here too, miraculously it works, also some examples of d3d, hologram is fast enough ( before drivers it doesn't work), but maybe those old drivers are not enough to forget samsung lack of interest or capacity to develop correct drivers.

my ROM PDA is nxxjd1 and csc eurjd4, winmo 6.5.3 , and also i think it includes framework 3.7.

i don't know if there are other 3d application that work or enhanced with this drivers, but with Xtrakt or Cops and Robbers is just the same apparently, works like before.

Can you please post all required cabs here? Thanks

[Guest calolobo]

I make a post with the links, i hope it works

WORKING VR Hologram for Omnia 2

[Guest ED2O9]

With the drivers and application you've provided installed on my i920, I get the following error message:

The sample has run into an error and deedsto close:

DriverInvalidCallException

[Guest calolobo]

Well well, maybe the reason works on my omnia 2, is the rom, or the Compact Framework, mine is 3.5.9085 (found in hklm/software/microsoft/.NETCompactFramework) , maybe others can share their experience find the best way to make it work.

[Guest frankbel]

It's just an eye-tracking appl based on g-sensors instead of camera. Just a simple demo, in future things like that will be on every device.

[Guest lambi1982]

Well well, maybe the reason works on my omnia 2, is the rom, or the Compact Framework, mine is 3.5.9085 (found in hklm/software/microsoft/.NETCompactFramework) , maybe others can share their experience find the best way to make it work.

I have 3.5.9198 and it doesn't work

Edited May 7, 2010 by lambi1982

[Guest ciribic]

Here's how I got it working:

1. install i8000htcsensoremu.cab

this should create HTCEmuCalibrator in Windows settings/system

2. go to Windows settings/system, run HTCEmuCalibrator and check the field "virtual screen wheel" (enables you to zoom in/out when in hologram) and then click close

3.install Driver_SJ SamsungOmniaD3D.cab

4.install Diamond hologram v2.02.cab

5. replace Diamond Hologram MD3DM.exe (it's located in "Program files/Diamond hologram/") with provided one

6. run hologram app

7.in the lower part of the screen make clockwise/counterclockwise motion with your finger to zoom in/out

8. tap on the upper part of the screen for setings/exit

known bugs:

"i8000-htc-g-sensor-emu.cab" disables G-sensor in Resco Photo viewer

and here's the package (every link is the same file so choose which ever hoster you prefer):

http://www.megaupload.com/?d=YHZJRBF5

http://www.filefactory.com/file/b1917fd/n/Hologram.rar

http://hotfile.com/dl/41972870/96a9974/Hologram.rar.html

http://netload.in/dateiukOndUCy6U/Hologram.rar.htm

http://rapidshare.com/files/386087729/Hologram.rar

Edited May 11, 2010 by ciribic

[Guest muchospesos]

works like a charm :P. Thanks for sharing.

[Guest drorcun]

works like a charm :P. Thanks for sharing.

+11

[Guest the sandman]

this is pretty cool, works great thanks. is there a way to zoom in?

[Guest calolobo]

this is pretty cool, works great thanks. is there a way to zoom in?

well just slide finger left>right will make zoom in

an slide right<left will make zoom out

doesn't work always....

[Guest ciribic]

well just slide finger left>right will make zoom in

an slide right<left will make zoom out

doesn't work always....

it works in circular motion, clockwise/counterclockwise to zoom in/out

[Guest chokia]

This is so cool

Edited May 10, 2010 by chokia

[Guest the sandman]

it works in circular motion, clockwise/counterclockwise to zoom in/out

whenever i touch the screen it opens up the settings. not able to zoom. tried circular motion and sliding left to right

[Guest Snow02]

Yeah. Works perfectly. Overclocked, I'm getting good performance. 12.5 fps average.

[Guest ciribic]

whenever i touch the screen it opens up the settings. not able to zoom. tried circular motion and sliding left to right

Settings should pop-up only when upper half of the screen is touched, while the lower half is used for the virtual screen wheel.

also you should check that the option "virtual screen wheel" is activated in "Windows settings/system/htcemu calibrator"

Edited May 10, 2010 by ciribic

[Guest the sandman]

Settings should pop-up only in upper half of the screen, while the lower half is used for the virtual screen wheel.

also you should check that the option "virtual screen wheel" is activated in "Windows settings/system/htcemu calibrator"

ah ok that did it for me. didnt have the virtual screen wheel activated. thanks a lot for your help

[Guest lambi1982]

Can't get HTC-Emu (G-sensor) to work on my i920. Installed it, restarted, go into config screen and x and y values are blank, any ideas???

[Guest the sandman]

Can't get HTC-Emu (G-sensor) to work on my i920. Installed it, restarted, go into config screen and x and y values are blank, any ideas???

as far as I know the x and y valued are supposed to be blank cuz they are for me. Not sure why it's not workin for you tho