Guest maniac103 Posted November 12, 2005 Report Posted November 12, 2005 Hiya Maniac103, Your program is truly amazing. It's definitey the best one around, and the only one i know of that works on my c550. I have had no problems with the program itself... I do however have one small problem with the tabs in the 'Near Cells...' bit. Is there any way of changing the width of these tabs, coz obviously i can't click and drag ;) It's not a big problem, and i'm not bothered if it's not solvable, i'm just curious about what is beind the tab, all i see is... # LAC C... S... Name * 6... 1... 2... Learned... 1 4... 2... 9... Learned... 2 6... 1... 1... Learned... 3 6... 1... 1... Learned... 4 6... 3... 1... Learned... 5 6... 3... 1... Learned... 6 6... 1... 2... Learned... a little confusing as you can imagine... <{POST_SNAPBACK}> The columns are "LAC", "CellID", "Signal level" and "Name". I will have a look into this to make it look ok both on non-QVGA and QVGA phones. :D
Guest Brins0 Posted November 12, 2005 Report Posted November 12, 2005 Thanks... And thanks again for even developing it in the first place... amazing...
Guest maniac103 Posted November 13, 2005 Report Posted November 13, 2005 Thanks... And thanks again for even developing it in the first place... amazing... <{POST_SNAPBACK}> 1.74 - which I recently uploaded - should have fixed it. Check it out ;)
Guest Brins0 Posted November 13, 2005 Report Posted November 13, 2005 Yes that's perfect now, thx alot... This program is now flawless... oh, actually, could you slide in a manual refresh button? or maybe a refresh rate toggle or summit, seems a little inaccurate when traveling at speed... thx again...
Guest ewel Posted November 13, 2005 Report Posted November 13, 2005 It's a cool app, and it seems to work well on my Qtek 8020 (HTC Feeler) which is not mentioned in your list of compatible devices. However, either I don't understand how to use it or it could be impoved a bit... When leaving a cell or group of cells it is great to start an application automatically (for example call assistant) but it would be nice if it was possible to set the app to turn off that application on return. What also would be nice is to combine what this app can do with the online accessible database of CellTrack. On the other hand, the ability to start an application makes it much more useful than TinyGPS.
Guest Brins0 Posted November 14, 2005 Report Posted November 14, 2005 You could theoretically make it do anything, by writing a small application for it to run... You could make it call someone, or send an sms message using a little 'macro' type thing... The possibilities are actually endless... It would actually be handy to make your smartphone start activesync, and sync by bluetooth as you got home, would be really handy...
Guest maniac103 Posted November 14, 2005 Report Posted November 14, 2005 It's a cool app, and it seems to work well on my Qtek 8020 (HTC Feeler) which is not mentioned in your list of compatible devices. The Qtek 8020 is a HTC Typhoon (Feeler is just a variant, the SDA is also a Feeler) which is listed ;) However, either I don't understand how to use it or it could be impoved a bit... When leaving a cell or group of cells it is great to start an application automatically (for example call assistant) but it would be nice if it was possible to set the app to turn off that application on return.But how should I shutdown the application? Not every application has a window to send the close message to, and some applications do not respond to a close message... What also would be nice is to combine what this app can do with the online accessible database of CellTrack. I'm sorry, but I can't implement such a thing...the GPRS tarifs here in Germany are just horrible :shock:
Guest Brins0 Posted November 14, 2005 Report Posted November 14, 2005 I'm sorry, but I can't implement such a thing...the GPRS tarifs here in Germany are just horrible :shock: You could possibly package the online database up, so it can be downloaded on a pc, and copied to the phone... I don't know exactly how big it is, but it's a start...
Guest maniac103 Posted November 17, 2005 Report Posted November 17, 2005 CellProfileSwitcher now has a French translation (thanks go to Francois-Xavier Belloir! :D ) So for all the French users: Have fun :)
Guest Brins0 Posted November 26, 2005 Report Posted November 26, 2005 Just had a thaught actually, if the online database could be downloaded in bulk, you could use activesync, and use the internet passthrough thing to download it... so you could actually implement it the same way as that other program, and test it simply, for free... I'd be happy to test it for you anyway, just mail me... You'd need a biggish card tho, would kick backside tho :)
Guest gamefreakgcb Posted December 1, 2005 Report Posted December 1, 2005 (edited) Umm... Can this work in US? It seems I cant get anything. Maybe it is not provided by my provider? Edited December 1, 2005 by gamefreakgcb
Guest looeee Posted December 19, 2005 Report Posted December 19, 2005 hi thanks for this app. it can't manage to change profiles on my Qtek 8310 it just sits at the poweroff menu without selecting one. i have wifi option enabled i am curious as to why you don't drive profiles.exe instead. it loads much faster and is consistent on all OSs? i also can't get the execute file option to run shortcuts, documents or to pass commandline parameters. looeee
Guest maniac103 Posted December 19, 2005 Report Posted December 19, 2005 (edited) hi thanks for this app. it can't manage to change profiles on my Qtek 8310 it just sits at the poweroff menu without selecting one. i have wifi option enabled i am curious as to why you don't drive profiles.exe instead. it loads much faster and is consistent on all OSs? Hmm, very good idea. I'll have a look at that. At the moment I run quickapp.exe. What is the language your phone is set to (registry value HKEY_CURRENT_USER\MUI\CurLang)? i also can't get the execute file option to run shortcuts, documents or to pass commandline parameters. <{POST_SNAPBACK}> I'll have a look at that. EDIT: I think I have fixed this in 1.83 :) Edited December 20, 2005 by maniac103
Guest looeee Posted December 21, 2005 Report Posted December 21, 2005 Hmm, very good idea. I'll have a look at that. At the moment I run quickapp.exe. What is the language your phone is set to (registry value HKEY_CURRENT_USER\MUI\CurLang)? I'll have a look at that. EDIT: I think I have fixed this in 1.83 :) <{POST_SNAPBACK}> my language is 1033 wow! that was fast! what syntax should i use? i tried the following: "\program files\blah.exe" "\my documents\blah.ext" "\windows\start menu\shortcut.lnk" "\my documents\blah.ext" but they didn't work. also.. i have bluetooth set to turn off if i go home and no events set to turn it on and yet bluetooth turns on when i leave home looeee
Guest maniac103 Posted December 21, 2005 Report Posted December 21, 2005 (edited) my language is 1033 Hmmm, this is plain English...does it work sometimes or never? wow! that was fast! what syntax should i use? i tried the following: "\program files\blah.exe" "\my documents\blah.ext" "\windows\start menu\shortcut.lnk" "\my documents\blah.ext"\Program Files\Blah.exe "\My Documents\Blah.ext" Hmm, when I think about it, your syntax makes more sense. I'll have to rework that :) EDIT: Done. Now the syntax is "\Program Files\Blah.exe" "\My Documents\Blah.ext" Please try the attached file (copy the CellProfileSwitcher.exe in the zip file into \Program Files\CellProfileSwitcher - before you have to disable the program and backup the old exe). If it works, I will make a 1.84 out of it. This one also writes some debug log into \Temp\CPSDebug.txt. Please try to switch BT and profiles and send me the file mentioned above if something goes wrong. also.. i have bluetooth set to turn off if i go home and no events set to turn it on and yet bluetooth turns on when i leave home <{POST_SNAPBACK}> I'll have a look at that. EDIT: This is the correct behaviour. When you enter a cell and the program changes some settings, these settings are saved and restored upon leave of the cell if there is no "leave" setting. Edited December 21, 2005 by maniac103
Guest looeee Posted December 21, 2005 Report Posted December 21, 2005 hi and thanks again for your fast response. It just sits there on the quicklist without selecting any of the profiles. Here is my log file. looeeeCPSDebug.zip
Guest maniac103 Posted December 21, 2005 Report Posted December 21, 2005 hi and thanks again for your fast response. It just sits there on the quicklist without selecting any of the profiles. Here is my log file. looeee <{POST_SNAPBACK}> First thing: In general it is a wise idea to install the program into the internal memory because of auto start and home screen plugin (I wonder that auto start works on your phone :??: ) The log is very interesting: The program finds the Quick List window, but it seems that the Quick List does not get the WM_KEYDOWN messages. Can you please try the updated exe file? I have added some new debug messages. And did the new execute code work?
Guest looeee Posted December 21, 2005 Report Posted December 21, 2005 Hiya From (other) tests I've done it looks like having startup programs in the Storage Card works fine on WM5 Haven't tried the new execute code yet ... sorry ... looeeeCPSDebug.zip
Guest maniac103 Posted December 22, 2005 Report Posted December 22, 2005 Hiya From (other) tests I've done it looks like having startup programs in the Storage Card works fine on WM5 <{POST_SNAPBACK}> Ok then, that's not the case on WM2K3 :) Reading the log file I have no clue what's going wrong and how to help you. I tried it with the WM5 QVGA emulator a minute ago and everything worked fine. Does anybody else see problems like this?
Guest maniac103 Posted December 29, 2005 Report Posted December 29, 2005 hi and thanks again for your fast response. It just sits there on the quicklist without selecting any of the profiles. Here is my log file. looeee <{POST_SNAPBACK}> I have just released 1.84 which tries to address this issue by using the profiles window. Just try it and tell me if your problems are fixed ;)
Guest looeee Posted December 29, 2005 Report Posted December 29, 2005 (edited) thank you It now changes profiles for me i think you may have left the debugging on as its still making the ooh file looeee Edited December 29, 2005 by looeee
Guest removed-2 Posted January 5, 2006 Report Posted January 5, 2006 (edited) I get my C600 to automatically device lock (not keylock) after 5 mins of inactivity. To unlock this a password has to be entered. How will CellProfileSwitcher work with this? Is there a method of entering my password into your application so that it can unlock the device??? Does this work more efficiently using keylock instead of device lock? Also, do you have any plans to setup an automated sms to pre-define mobile number when entering or leaving a cell, say to automatically text someone to say "just got to work" or "just got home"? Thanks Mark Edited January 5, 2006 by removed-2
Guest maniac103 Posted January 5, 2006 Report Posted January 5, 2006 I get my C600 to automatically device lock (not keylock) after 5 mins of inactivity. To unlock this a password has to be entered. How will CellProfileSwitcher work with this? Is there a method of entering my password into your application so that it can unlock the device??? Does this work more efficiently using keylock instead of device lock? CellProfileSwitcher does not care about any kind of keypad lock. So this just shouldn't matter. Also, do you have any plans to setup an automated sms to pre-define mobile number when entering or leaving a cell, say to automatically text someone to say "just got to work" or "just got home"? Thanks Mark <{POST_SNAPBACK}> Till now I had no plans about that ;) I will have a look how hard this is to realize.
Guest looeee Posted January 5, 2006 Report Posted January 5, 2006 automated sms to pre-define mobile number when entering or leaving a cell Since you can run any program on an event, you could create your own xBar macros to do this looeee
Guest maniac103 Posted January 5, 2006 Report Posted January 5, 2006 Since you can run any program on an event, you could create your own xBar macros to do this looeee <{POST_SNAPBACK}> This is a very good idea. I did a little research in the last minutes and found out that it's doable, but not that simple. I really think it's not worth the effort as there is another solution to do this. Are there any other opinions?
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now