Guest mayo98 Posted January 22, 2006 Report Posted January 22, 2006 Hi. Thanks!! I did. Its version 2.87. I will greatly appreciate if you could re-upload the cab. THanks!! Thanks!! <{POST_SNAPBACK}> Sorry. Should be 1.87. Typo error.
Guest maniac103 Posted January 22, 2006 Report Posted January 22, 2006 Hi. Thanks!! I did. Its version 2.87. I will greatly appreciate if you could re-upload the cab. THanks!! Thanks!! <{POST_SNAPBACK}> I've reuploaded the CAB.
Guest mayo98 Posted January 22, 2006 Report Posted January 22, 2006 I've reuploaded the CAB. <{POST_SNAPBACK}> Hi, I reinstalled the application, but now its quite weird. There's nothing to choose from the dropdown list that you have when you set the option. Do I need to do anything ? Let me know. Thanks
Guest mayo98 Posted January 22, 2006 Report Posted January 22, 2006 Hi, I reinstalled the application, but now its quite weird. There's nothing to choose from the dropdown list that you have when you set the option. Do I need to do anything ? Let me know. Thanks <{POST_SNAPBACK}> Also, the version states : Build %s %s © Danny Baumann 2005 I think there must be something that was removed from your code?
Guest maniac103 Posted January 22, 2006 Report Posted January 22, 2006 (edited) Also, the version states : Build %s %s © Danny Baumann 2005 I think there must be something that was removed from your code? <{POST_SNAPBACK}> I created the cab out of a backup as I altered my code due to the upcoming v1.9. It seems something went wrong with this ;) Let me have a look... EDIT: I've reuploaded the CAB again. Hopefully this time everything is correct. Edited January 22, 2006 by maniac103
Guest Petyas Posted January 22, 2006 Report Posted January 22, 2006 Do you have the main executable running (More->Options->Enabled)? I just had a look at the code: "----" is used if the main executable is disabled. OK, I'll have a look at that. I've attached the quick'n'dirty MPX220 test tool here. After executing this program on an MPX220, two message boxes should appear ("Buffer" and "CellID"). I need the contents of these boxes. <{POST_SNAPBACK}> Cool. I tested now and send you result ;-)
Guest Petyas Posted January 22, 2006 Report Posted January 22, 2006 Cool. I tested now and send you result ;-) <{POST_SNAPBACK}> So, here are my results: Buffer: +CREG: 1, "5028", "6DB4" +CREG: 1, "5028", "713A" +CREG: 1, "5028", "6DB4" +CREG: 1, "5028", "713A" +CREG: 1, "5028", "6DB4" +CREG: 1, "5028", "713A" +CREG: 1, "5028", "7138" +CREG: 1, "5028", "713A" +CREG: 1, "5028", "64B8" +CREG: 1, "5028", "713A" +CREG: 1, "5028", "6DB4" +CREG: 1, "5028", It's ok?
Guest Petyas Posted January 22, 2006 Report Posted January 22, 2006 So, here are my results: Buffer: +CREG: 1, "5028", "6DB4" +CREG: 1, "5028", "713A" +CREG: 1, "5028", "6DB4" +CREG: 1, "5028", "713A" +CREG: 1, "5028", "6DB4" +CREG: 1, "5028", "713A" +CREG: 1, "5028", "7138" +CREG: 1, "5028", "713A" +CREG: 1, "5028", "64B8" +CREG: 1, "5028", "713A" +CREG: 1, "5028", "6DB4" +CREG: 1, "5028", It's ok? <{POST_SNAPBACK}> Second start is different ??? Buffer: +CREG: 1, "5028", "713A" +CREG: 1, "5028", "7138" +CREG: 1, "5028", "713A" +CREG: 1, "5028", "7138" +CREG: 1, "5028", "713A" +CREG: 1, "5028", "7138" +CREG: 1, "5028", "713A" +CREG: 1, "5028", "7138" +CREG: 1, "5028", "713A" +CREG: 1, "5028", "7138" +CREG: 1, "5028",
Guest Petyas Posted January 22, 2006 Report Posted January 22, 2006 Cool. I tested now and send you result ;-) <{POST_SNAPBACK}> CellId = 56 next CellId = 58 next CellId = 184 next CellId = 155 That's normal?
Guest Petyas Posted January 22, 2006 Report Posted January 22, 2006 Second start is different ??? Buffer: +CREG: 1, "5028", "713A" +CREG: 1, "5028", "7138" +CREG: 1, "5028", "713A" +CREG: 1, "5028", "7138" +CREG: 1, "5028", "713A" +CREG: 1, "5028", "7138" +CREG: 1, "5028", "713A" +CREG: 1, "5028", "7138" +CREG: 1, "5028", "713A" +CREG: 1, "5028", "7138" +CREG: 1, "5028", <{POST_SNAPBACK}> Yes, it's work. My LAC is 5028 and CellId is 713A. This informations are from Engineering menu. ;)
Guest rperalta Posted January 22, 2006 Report Posted January 22, 2006 Hello all, How do I change the Cell group? It says "Unassinged" all the time. For some reason I don't know how to change it. Device: Cingular 2125 (aka HTC Tornado) OS: Windows Mobile 5 Screen: QGVA Thanks, Robert
Guest mayo98 Posted January 23, 2006 Report Posted January 23, 2006 I created the cab out of a backup as I altered my code due to the upcoming v1.9. It seems something went wrong with this ;) Let me have a look... EDIT: I've reuploaded the CAB again. Hopefully this time everything is correct. <{POST_SNAPBACK}> Hi. Its working fine now. Thanks!!! Its a great application. Good Work
Guest maniac103 Posted January 23, 2006 Report Posted January 23, 2006 (edited) Yes, it's work. My LAC is 5028 and CellId is 713A. This informations are from Engineering menu. ;) <{POST_SNAPBACK}> OK, I'll include this then. :D I'll tell you when I have a beta version ready. EDIT: Please PM me your mail address to speed up debugging. I need the following info: - complete output from the engineering menu - I've attached a new test tool. This creates a text file (\Temp\CPS_MPX220_Test.txt). I need the contents of this file. Edited January 23, 2006 by maniac103
Guest maniac103 Posted January 23, 2006 Report Posted January 23, 2006 Hello all, How do I change the Cell group? It says "Unassinged" all the time. For some reason I don't know how to change it. Device: Cingular 2125 (aka HTC Tornado) OS: Windows Mobile 5 Screen: QGVA Thanks, Robert <{POST_SNAPBACK}> Mark "Known cells", select "More" (right soft key) and then "Add".
Guest Petyas Posted January 23, 2006 Report Posted January 23, 2006 OK, I'll include this then. ;) I'll tell you when I have a beta version ready. EDIT: Please PM me your mail address to speed up debugging. I need the following info: - complete output from the engineering menu - I've attached a new test tool. This creates a text file (\Temp\CPS_MPX220_Test.txt). I need the contents of this file. <{POST_SNAPBACK}> OK. This is ouput from Engineering menu. Tell me what do you need exactly. Cell info matrix: arfcn c1 c2 rxlev bsic cId Lac fn_offset s 00076 00062 00061 00063 00043 6BB5 362E 0 1 00033 00054 00054 00057 00035 6BB4 362E 0 2 00104 00034 00033 00035 00026 6BB3 362E 1 3 00055 00024 00026 00029 00045 FFFF 362E 2714026 4 00057 00000 00025 00028 00050 0000 0000 0 5 00031 00022 00024 00027 00033 7376 362E 1483578 6 00078 00000 00000 00027 00020 0000 0000 0 Service Cell info: arfcn=76 c1=61, c2=61 rxlev=62 bsic=43 cID=6BB5 lac=362E fn_offset=0 time_alig=0 cba=0, cbq=0 max_retrans=2 reest_flag=1 rxlev_min=5 ngprs_indic=5 mcc=230, mnc=1F And this are informations from your apps: CellId=180 REG: 1, "362E,"6BB4" +CREG: 1, "362E,"6BB5" +CREG: 1, "362E,"6BB4" +CREG: 1, "362E,"6BB5" +CREG: 1, "362E,"6BB4" +CREG: 1, "362E,"6BB5" +CREG: 1, "362E,"6BB4" +CREG: 1, "362E,"6BB5" +CREG: 1, "362E,"6BB4" +CREG: 1, "362E,"6BB5" +CREG: 1, "362E,"6
Guest Petyas Posted January 23, 2006 Report Posted January 23, 2006 OK, I'll include this then. ;) I'll tell you when I have a beta version ready. EDIT: Please PM me your mail address to speed up debugging. I need the following info: - complete output from the engineering menu - I've attached a new test tool. This creates a text file (\Temp\CPS_MPX220_Test.txt). I need the contents of this file. <{POST_SNAPBACK}> Sorry i overlooked your new test file. I've attached my output.CPS_MPX220_Test.txt
Guest maniac103 Posted January 23, 2006 Report Posted January 23, 2006 (edited) Sorry i overlooked your new test file. I've attached my output. <{POST_SNAPBACK}> And sorry, there was a bug in the program. EDIT: Debug file sent to you via mail. Edited January 23, 2006 by maniac103
Guest Petyas Posted January 23, 2006 Report Posted January 23, 2006 And sorry, there was a bug in the program. EDIT: Debug file sent to you via mail. <{POST_SNAPBACK}> i sended you log via mail ;)
Guest tego Posted January 23, 2006 Report Posted January 23, 2006 If you fix your test program, I will send to you my MPX220 log .. if you still need it..
Guest maniac103 Posted January 23, 2006 Report Posted January 23, 2006 If you fix your test program, I will send to you my MPX220 log .. if you still need it.. <{POST_SNAPBACK}> Thanks for that, but I'm already debugging everything with Petyas. First tries look promising, but MPX220 support will probably be limited (only LAC and CellID of the servicing cell, no Country and Network identifier, no near cells).
Guest maniac103 Posted January 29, 2006 Report Posted January 29, 2006 I have just released CPS 1.9 on my page :) Highlights: - MPX220 support - Automatic Keylock interaction For interaction with Automatic Keylock you need v3.4 which I also have released today :D
Guest removed-2 Posted January 29, 2006 Report Posted January 29, 2006 I have just released CPS 1.9 on my page :) Highlights: - MPX220 support - Automatic Keylock interaction For interaction with Automatic Keylock you need v3.4 which I also have released today :D <{POST_SNAPBACK}> I have just installed this and selected the options to keep my old settings and now all that comes up on the home screen is ---------(0/0) when I go into the configurator and click current cell it says 0 to all sections. Any ideas? Thanks Mark
Guest maniac103 Posted January 29, 2006 Report Posted January 29, 2006 I have just installed this and selected the options to keep my old settings and now all that comes up on the home screen is ---------(0/0) when I go into the configurator and click current cell it says 0 to all sections. Any ideas? Thanks Mark <{POST_SNAPBACK}> I should have been clearer :) I always recommend reading the history - especially in this case. As I have move the settings in registry, you have to reenter your settings once.
Guest removed-2 Posted January 29, 2006 Report Posted January 29, 2006 I should have been clearer :) I always recommend reading the history - especially in this case. As I have move the settings in registry, you have to reenter your settings once. <{POST_SNAPBACK}> I have re-installed and didn't keep my settings this time, however I still get the same problem and no cell readings??? ------ (0/0). Any ideas? Thanks Mark
Guest maniac103 Posted January 30, 2006 Report Posted January 30, 2006 I have re-installed and didn't keep my settings this time, however I still get the same problem and no cell readings??? ------ (0/0). Any ideas? Thanks Mark <{POST_SNAPBACK}> Did you go to Menu->Options and set your phone type again? As I said, you have to reenter your settings.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now