MDA PRO died after flashed it with AKU3.0

[Guest fuhayer]

Hi all, i have flashed my MDA"PRO from WM5 Universal rom to AKU3.0

upon its flashed my device is not worked.

i have tried to get bootscreen to flash it with old rom but i cannot get bootloader screen.

is there any way to get boot screen to flash it with universal WM5 rom ?

i have tried light+power+reset to achieve bootloader screen but my device is not responding.

help please.

[Guest fluffcat1]

You may be ib bootloader mode without realising it - it does not illuminate the screen it just displays very faint characters. Try downloading th eofficial update from t-mobile and running that.

If you cannot get a bootloader screen you will need to pay HTC to reflash the device using jtag - you will not be able to flash it yourself.

Richard

[Guest fuhayer]

You may be ib bootloader mode without realising it - it does not illuminate the screen it just displays very faint characters. Try downloading th eofficial update from t-mobile and running that.

If you cannot get a bootloader screen you will need to pay HTC to reflash the device using jtag - you will not be able to flash it yourself.

Richard

it did not show anything on screen. i have tried many times to get bootscreen but no any button is working. no usb or seril word on screen.

my computer just notifying unknown usb device recognised. and then no any action. i have original rom file downloaded from T-Mobile page and imate page but just need a trick to get boot screen

[Guest Paul (MVP)]

You're knackered I think my friend...

P

[Guest fluffcat1]

it did not show anything on screen. i have tried many times to get bootscreen but no any button is working. no usb or seril word on screen.

my computer just notifying unknown usb device recognised. and then no any action. i have original rom file downloaded from T-Mobile page and imate page but just need a trick to get boot screen

There is no 'trick' to enter bootloader if the standard method doesn't work. Charge the battery fully in another device if you have one, leave the battery out of your broken MDA for at least 3 hrs or so and try again.

Maybe try a different computer also?

Again, you may not realise you are in bootloader mode as it doesn't make a song and dance about it. However, it shouldn't be this hard to do - a device with a corrupt o.s and intact bootloader will automatically start in bootloader mode when powered up.

If you have corrupted your bootloader you *will not* recover it using a computer and USB cable. It's impossible. You need to return it to a HTC service centre for stripping down and flashing using specialist equipment using a direct board connection.

http://service.htceurope.com/

Enter your seriel number and select 'user damaged' or somesuch and then select 'bad flash' to get a quote including labour.

Or claim that it is a warranty problem and it simply won't power on and don't mention you flashed it :) -you're more likely to get away with that through a repair via a t-mobile shop but it will take longer.

( Not that I'd do that - but then, I'm not daft enough to brick an expensive device I can't recover myself ;) )

Richard

[Guest fuhayer]

thanks Richard for the information. i will contact HTC service for board flash.