Report your issues with DXHI1 here

[Guest chamby]

after flashing to hi1 unable to use the motion sensor.

screen doesnot rotate when turning. ;)

this happened to me and i mentioned it in secanys thread

for me the fix was simple

id turned the backlight off and the motion sensor stoped working after 1 or 2 rotates but turnng the backlight on then soft reseting solved it for me

have you turned the backlight off? if so try turning it back on

[Guest Geronymous]

this happened to me and i mentioned it in secanys thread

for me the fix was simple

id turned the backlight off and the motion sensor stoped working after 1 or 2 rotates but turnng the backlight on then soft reseting solved it for me

have you turned the backlight off? if so try turning it back on

In all the ROMs I've had, the motion sensor works while the backlight is on (so when you are using the device)... if it turns off (after f.i. 30 seconds because you are not using the device), the motion sensor does not work anymore... not a problem for me... more or less what I expected.

[Guest ronaldb3]

yer ive got that problem too!!!!!!!!!!! really annoying... ;) :wacko:

Just to eliminate the obvious - is Settings/System/Motion Sensor set to "Automatic" and not set to "Manual"? Also you can set sensitivity higher for quicker response.

Ron...

[Guest dikko]

Just to eliminate the obvious - is Settings/System/Motion Sensor set to "Automatic" and not set to "Manual"? Also you can set sensitivity higher for quicker response.

Ron...

off corse the motion sensor is automaticly. it doesnot work anymore ;)

Edited September 27, 2008 by dikko

[Guest ronaldb3]

Just noticed that with DXHI1 the is no Getting Started app for the tip on getting ringtones. Does anyone with a different flash level know the right Samsung site name?

Thanks... Ron...