QBUS & Sector & Khuanchai Windows Mobile 6.5 Research Thread

[Guest new2city]

Volume button Works, but only if you are on the Today screen.

Look for Torchlight cab around here. You can run it anytime as an appl.

Ron...

oh, ok, great.. thanks for pointing it out, I almost forgot about that.

besides the torchlight cab, anyone else know how to get the volume button working all the time? I am using SPB Mobile Shell 3 nowadays and it is doesn't work because I don't use the default today screen anymore..

[Guest mynullvoid]

Sector,

Once I did a hard reset, my Task Manager which should appear top right went missing, how can I get it back?

[Guest Mike178]

For the mates that are using Titanium weather panel and S2U2 i found the solution for the wrong Icons, it is not the right thread but it might be useful for someone....

http://forum.xda-developers.com/showthread...652#post3656652

Big Thanks to Vultron for the hard work........

[Guest thePuck]

Sector I use your L2 firmware and have problem with Enhanced GPS. It doesn't start at all (( Is there solution for this?

[Guest elabdel]

Hello any one,

I am facing a very serious issue, my omnia is dead, please help !!!

On April i updated my i900 with the official ROM XHHJ2, after I discovered khuanchai roms and loved them, The last one I installed was the 21198 4 in 1.

Yesterday I wanted ti try the DXID1 21222 m3 from sector but the upgrade stopped during step1 : Downloading EBoot. I waited for about 20 minutes but I had the OMNIA screen only. Then I made reset for my phone but at start OMNIA screen is the only thing I can see.

I managed to remove the battery but nothing changed. I tried to reinstall my first official upgrade, it works a first but It stopped at downloading of DISKIMAGE and at restart the screen stay black.

Now, when I try to start my phone, the power button becomes red but the screen doesn't start. the reset button make the power one to switch off and on again. My phone is not detected by any rom upgrader and I can't do anything. Please help me

thank you

Edited May 8, 2009 by elabdel

[Guest kurniawan]

So just a question : can you tell me how can I autoinstall my apps after a flash or gimme a good prg to do it

Lazy I'm ro reinstall whole SPA

Wanted to reply earlier...

Try SASHIMI.

Works for me. U can place cab's, reg's, files, in a dir for autoinstall. I have placed many reg files to auto configure my phone settings like ringtones, large startmenu (honeycomb), owner info, buttonsettings and so on. it takes lot of time to pre configure, but once u have your work done... it takes 5 min after a reflash or hard reset and ur done!!!

[Guest cheese_za]

hi there

i wanted to know if there was anyway to revert back to the samsung dialer and they way that used to handle the contacts?

i don't like the black dial pad and when i click on a contact in the "found list" it takes me to a blank screen with the summary and notes tabes below. both tabs show no content.

and how do i change the default application for the clock to samsung clock.

i followed the instruction from the first post :

1. Disable Titanium.

2. You need to browse to \HKLM\Software\Microsoft\Chome\CClock and change the SK2URL to \Windows\Start Menu\Programs\Clock.lnk (if you are using Samsung alarm).

3. Enable Titanium. Thats it.

after that and a soft reset the tab will still open the default clock.

thanks

[Guest DominikZ]

hi there

i wanted to know if there was anyway to revert back to the samsung dialer and they way that used to handle the contacts?

i don't like the black dial pad and when i click on a contact in the "found list" it takes me to a blank screen with the summary and notes tabes below. both tabs show no content.

and how do i change the default application for the clock to samsung clock.

i followed the instruction from the first post :

1. Disable Titanium.

2. You need to browse to \HKLM\Software\Microsoft\Chome\CClock and change the SK2URL to \Windows\Start Menu\Programs\Clock.lnk (if you are using Samsung alarm).

3. Enable Titanium. Thats it.

after that and a soft reset the tab will still open the default clock.

thanks

Try installing Original Dialer Skin and Clock from here.. Hope it works..

[Guest rendeiro2005]

hi there

i wanted to know if there was anyway to revert back to the samsung dialer and they way that used to handle the contacts?

i don't like the black dial pad and when i click on a contact in the "found list" it takes me to a blank screen with the summary and notes tabes below. both tabs show no content.

and how do i change the default application for the clock to samsung clock.

i followed the instruction from the first post :

1. Disable Titanium.

2. You need to browse to \HKLM\Software\Microsoft\Chome\CClock and change the SK2URL to \Windows\Start Menu\Programs\Clock.lnk (if you are using Samsung alarm).

3. Enable Titanium. Thats it.

after that and a soft reset the tab will still open the default clock.

thanks

to change to samsung contacts go to chome-manual edit item values. on the right panel choose cclock and then on the right chose SK2URL and choose \windows\TClock.exe

to manage contacts the only way i know is to change bottom/left bar to do this go to chome-manual edit item values and on the right panel choose SK1URL and change value to \Windows\SECContact

that`s it :D

Edited May 8, 2009 by rendeiro2005

[Guest ronaldb3]

oh, ok, great.. thanks for pointing it out, I almost forgot about that.

besides the torchlight cab, anyone else know how to get the volume button working all the time? I am using SPB Mobile Shell 3 nowadays and it is doesn't work because I don't use the default today screen anymore..

Hi new2city,

I also use MS3.

Back a few months ago when cooked roms were really getting started, it was discussed and pretty much agreed to, that the Volume button from the Today screen was the only way to turn on the Samsung included flash routine. I've seen no further solution since.

So just put Torchlight in your MS3 favorites and it is only a couple of taps away. :D

Ron...

Edited May 8, 2009 by ronaldb3

[Guest vinbeaver]

Has anyone found a dialer or caller id that functions and plays well with wm 6.5 that actually displays a decent size picture unlike our wonderful wm dialer and caller id that the picture is so small it's almost a waste of time?

[Guest tomdeluxe]

Oh I found a bug in mine,

WiFi = on

Phone drops to standby.

wake up and instead of lock screen just get the wallpaper with a wierd line and box bottom left,

nothing I do will unlock phone

phone lock = 6.5 not old school style

have the same bug but with no wifi on...only active sync mobile connect to exchange server...

any solutions or ideas???

[Guest Flaw1973]

Has anyone found a dialer or caller id that functions and plays well with wm 6.5 that actually displays a decent size picture unlike our wonderful wm dialer and caller id that the picture is so small it's almost a waste of time?

I use Resco Contact Manager, and works Very good.

Give it a try

[Guest vinbeaver]

I use Resco Contact Manager, and works Very good.

Give it a try

Does it play nice with the WM 6.5 lock screen. I used to use Inesoft Phone 4 and it would like my phone up everytime I answered a call, I would be able to finish the call but the screen would lock and would have to do a soft reset. I know all about being able to switch to Windows Classic lock but that is soooooooo drab.

[Guest Dream Girl]

Hi i want to more information about this WM 6.5 lock screen

[Guest cheese_za]

Try installing Original Dialer Skin and Clock from here.. Hope it works..

i did install that already, it made no difference.

to change to samsung contacts go to chome-manual edit item values. on the right panel choose cclock and then on the right chose SK2URL and choose \windows\TClock.exe

to manage contacts the only way i know is to change bottom/left bar to do this go to chome-manual edit item values and on the right panel choose SK1URL and change value to \Windows\SECContact

that`s it :D

thanks man. did as you said and now this it what happens:

when you are on the clock tab of chrome, the bottom soft buttons are phone and set. phone will now take you to the samsung contacts program and set will take you to the samsung clock.

now all i need to do is see what the program for the dialer is. i tried \windows\SECDialer and \windows\SECDial and they both kick out an error about not being able to find the file.

also, why does "tasks" not work. it just opens and closes.

anyone have any ideas?

Edited May 8, 2009 by cheese_za

[Guest RoSoMaK]

This link mediafire Original Dialler skin (DXIA5) error :D

[Guest rendeiro2005]

i did install that already, it made no difference.

thanks man. did as you said and now this it what happens:

when you are on the clock tab of chrome, the bottom soft buttons are phone and set. phone will now take you to the samsung contacts program and set will take you to the samsung clock.

now all i need to do is see what the program for the dialer is. i tried \windows\SECDialer and \windows\SECDial and they both kick out an error about not being able to find the file.

also, why does "tasks" not work. it just opens and closes.

anyone have any ideas?

about the dialer.....well just press the green button :lol: that`s what you want, right? no?

i don`t know what you mean about "tasks" :D

[Guest cheese_za]

This link mediafire Original Dialler skin (DXIA5) error :lol:

Original_Dialer.cab

there ya go :D

Edited May 8, 2009 by cheese_za

[Guest copperfield]

Sector I use L2 and there is no vibration on my incoming calls :D

Anyone facing this problem ??

[Guest cheese_za]

about the dialer.....well just press the green button :lol: that`s what you want, right? no?

i don`t know what you mean about "tasks" :D

:lol:

i don't like the black dialer skin that comes with this rom. i prefer the standard 1 that came with the phone.

tasks is a program that keeps a list of tasks.

Edited May 8, 2009 by cheese_za

[Guest Flaw1973]

Does it play nice with the WM 6.5 lock screen. I used to use Inesoft Phone 4 and it would like my phone up everytime I answered a call, I would be able to finish the call but the screen would lock and would have to do a soft reset. I know all about being able to switch to Windows Classic lock but that is soooooooo drab.

So far so good for me.

This latest version is bug free.

No soft reset ever needed cause of this software :D

Try it

[Guest kazzerra]

I want to send a file via bluetooth but I notice now there is no option to choose sending a file via bluetooth. In the previous rom the m2 there is an option to choose, i think. Is this only my problem or does anyone else have the same problem.

[Guest new2city]

post deleted..

Edited May 8, 2009 by new2city

[Guest new2city]

double posted, sorry..

Edited May 8, 2009 by new2city