QBUS & Sector & Khuanchai Windows Mobile 6.5 Research Thread

[Guest shokka9]

version 21500 is out! expect update soon :excl:

Bro, cant keep up!! PM me, busy as fook today!!

[Guest copperfield]

Anybody can get ANY taskbar to work on I2 ??! Tryied WhiteBattery and Grigoris Task Bar none of them work! With WhiteBatt the batt meter does not change and is allways full and with Grigoris the "X\OK" button is very,very small :excl: Is there any other task bar out there ??!

[Guest CPimentel]

Regarding p-h-o-n-e-x,

I know +- why the forum is blocking and I understand.

Just please seach on google and you will find it easily.

Regarding TouchPal,

You must download the winmo6.1 version. If you try to install the wrong version, the installation will fail right at the beginning.

[]'s

Cris

[Guest mr fantastic]

Regarding p-h-o-n-e-x,

I know +- why the forum is blocking and I understand.

Just please seach on google and you will find it easily.

Regarding TouchPal,

You must download the winmo6.1 version. If you try to install the wrong version, the installation will fail right at the beginning.

[]'s

Cris

Ok thanks :excl:

[Guest ronaldb3]

Has anyone used iContact with this new rom I2. For some reason i am unable to scroll through the contacts whether by flicking or holding and gliding my finger up and down.

HI VINBEAVER,

I am using icontact with no problem. I am using older version 0.81 as I like the icons better than v0.92.

Ron...

[Guest vinbeaver]

HI VINBEAVER,

I am using icontact with no problem. I am using older version 0.81 as I like the icons better than v0.92.

Ron...

I found that older version and am going to check it out to see if I have any problems. Thanks for the help.

[Guest hlay]

i have a problem flashing my phone part, hope someone here can help me on this.

i've been flashing new ROMs a lot lately without any problem, but now i can't receive any signal. every time i tried to flash a ROM, it fail at Switching Phone.

i tried to reflash with GP, everything seen ok, but turn out the phone part still not update, still don't have signal

please help. thanks in advance

[Guest chivi]

i have a problem flashing my phone part, hope someone here can help me on this.

i've been flashing new ROMs a lot lately without any problem, but now i can't receive any signal. every time i tried to flash a ROM, it fail at Switching Phone.

i tried to reflash with GP, everything seen ok, but turn out the phone part still not update, still don't have signal

please help. thanks in advance

I have the same problem,Sector do you now whay? :excl:

[Guest sector]

Is version 3a (Based on DXIA5/DXIA2, Samsung Stock Apps, Optimized) the latest rom and radio versions available?

i have a problem flashing my phone part, hope someone here can help me on this.

i've been flashing new ROMs a lot lately without any problem, but now i can't receive any signal. every time i tried to flash a ROM, it fail at Switching Phone.

i tried to reflash with GP, everything seen ok, but turn out the phone part still not update, still don't have signal

please help. thanks in advance

I have the same problem,Sector do you now whay? :excl:

try to remove drivers --> reboot.

install drivers --> reboot.

flash again.

im making next release without phone part 21500. i can provide the phone separately.

[Guest hlay]

I have the same problem,Sector do you now whay? :excl:

please anyone know how to reflash to get phone part back?

i don't think i brick it, ActiveSync 4.5 still detect my phone. i can still flash the PDA, CSC parts to other ROM but not Phone part

[Guest hlay]

try to remove drivers --> reboot.

install drivers --> reboot.

flash again.

im making next release without phone part 21500. i can provide the phone separately.

sector, thanks for reply.

i've done that, still fail when Switching to Phone on ROM .exe

did on GP, seem thing went fine, but still no Phone Part

what else should i try?

please give me some idea

Edit: i just reflashed back to the old DXHL3 ROM, now i see the acclamation sign with the picture of the phone (didn't show it before)

Edited April 9, 2009 by hlay

[Guest chivi]

please anyone know how to reflash to get phone part back?

i don't think i brick it, ActiveSync 4.5 still detect my phone. i can still flash the PDA, CSC parts to other ROM but not Phone part

Same here,I was remove drivers but is still the same no signal, i cant hard reset beceuse my phone is off and i cant turn phone on!!!!

[Guest copperfield]

Same here,I was remove drivers but is still the same no signal, i cant hard reset beceuse my phone is off and i cant turn phone on!!!!

Actually in your case it sounds like you bricked it!!! Sorry man. How do you know that there is no signal if you cant turn your phone on ??!! I guess you tryed removing the batt and putting it back on?

[Guest hlay]

Same here,I was remove drivers but is still the same no signal, i cant hard reset beceuse my phone is off and i cant turn phone on!!!!

chivi,

for hard reset, you try to: Press & hold the Talk & Hangup buttons, use a stylus to pock the reset button. then release the stylus but still hold the 2 buttons until you see the a confirmation about your hard reset. if you release the Phone & Hangup button too early, it won't work.

good luck

[Guest copperfield]

please anyone know how to reflash to get phone part back?

i don't think i brick it, ActiveSync 4.5 still detect my phone. i can still flash the PDA, CSC parts to other ROM but not Phone part

I red in another forum that you should plug your USB cable in to different socket on your mainboard, reinstall modem drivers and restart windows! Did work for me once but yesterday I tryed to flash a relly old rom couse I wanted the phone part, heard it was good on battery. No matter what I did I could not fash the old roms phone part (think was version HJ3 somethin). But I flashed with ease sectors I2 !? Dunno what to say or think :excl:

[Guest cobrica]

sector i am waiting for your updateee :excl:

i think i found one bug in this version..

when you woke up mobile,when is loading unlock screen the time is wrong.. after few seconds it change time to real time..

[Guest hlay]

Actually in your case it sounds like you bricked it!!! Sorry man. How do you know that there is no signal if you cant turn your phone on ??!! I guess you tryed removing the batt and putting it back on?

copperfield,

i think chivi trying to say when he try to do a hard reset by doing: Start>Settings>System>Hard reset, this way it'll tell you that the phone is off.

but he can still flash back & fore to other ROM. correct me if i'm wrong

[Guest hlay]

I red in another forum that you should plug your USB cable in to different socket on your mainboard, reinstall modem drivers and restart windows! Did work for me once but yesterday I tryed to flash a relly old rom couse I wanted the phone part, heard it was good on battery. No matter what I did I could not fash the old roms phone part (think was version HJ3 somethin). But I flashed with ease sectors I2 !? Dunno what to say or think :excl:

thanks for your info copperfield

yea, as i said earlier, i also flashing my phone like crazy almost everyday without a problem. it happenned to me last night when i tried Khuanchai 4in1 21202 then back to sector I2 (was with I2 before that). since then i stuck with this

[Guest chivi]

copperfield,

i think chivi trying to say when he try to do a hard reset by doing: Start>Settings>System>Hard reset, this way it'll tell you that the phone is off.

but he can still flash back & fore to other ROM. correct me if i'm wrong

You are write. HLAY did you manage to get the phone on back?

Edited April 9, 2009 by chivi

[Guest hlay]

You are write. HLAY did you manage to get the phone on back?

still have no luck yet. i'm not going to give up yet :excl:

[Guest chivi]

still have no luck yet. i'm not going to give up yet :excl:

Im trying two days now im a little pised WTF is wrong? Im flashing like crayze.... :excl: :excl: :excl:

Edited April 9, 2009 by chivi

[Guest xXJohnXx]

hlay and chivi how much different is this compared to a i600 flash?

some of them bricked there phone but got a solution

pda good but no phone part dunno how much it is different from omnia roms ?

trying to help a litle :excl:

[Guest copperfield]

copperfield,

i think chivi trying to say when he try to do a hard reset by doing: Start>Settings>System>Hard reset, this way it'll tell you that the phone is off.

but he can still flash back & fore to other ROM. correct me if i'm wrong

Oh sorry man did not knew this happens when you try to do hard reset and your phone is off :excl: Anyway I dont see how that happend couse by me I was simply stuck with the old version of the phone part and I could still make calls! I did had the phone with exclametion pic in the beginning :excl:

[Guest copperfield]

Im trying two days now im a little pised WTF is wrong? Im flashing like crayze.... :excl: :excl: :excl:

I think somebody alot more experienced than us should talk now!

[Guest krink]

the right soft key Communication Manager is not working correctly, it open the alarm when i press it, how can i fix this