Jump to content

*** ShokkA9 WM6.5 G-ROMs *** THE END ***


Recommended Posts

Posted

I hope you guys can help me. A few days ago I decided to flash my omnia to shokka's v21 rom, without any problems. I loved it, but I wanted to go back to my old official samsung ROM (Dutch) XKHJ3. I downloaded the official dutch ROM XKHJ3 again and tried to flash it back.

When the download was finished, I started the XP ROM upgrade with samsung modem driver and active sync. The first time its said: Incorrect software version. So I changed the version with a registry editor and the updater with HxD. Finally he said: Press ok to reset. I was very pleased, but when my phone restarted the only thing I could see was the samsung logo. Nothing happend. With a soft reset wm6.5 came alive luckely :)

After a few times, I found a clean DXIA5 ROM without the region checker. I was hoping to flash the original ROM XKHJ3/XKHJ3 from DXIA5. But again it failed, even when I changed the registry and updater.

What I've tried:

1. I900 registry -> from DXIA5 to XKHH4 (an older dutch ROM).

The Updater -> Defailt XKHJ3

2. I900 registry -> DXIA2

The updater -> I900DX

3. I900 Registry -> XKHH1 (also an older dutch ROM)

The Updater -> Defailt XKHJ3

I even changed the region to singapore and philipines. Its driving me nuts! Can someone tell me how I can flash my phone back with XKHJ3 Original?? Is there maybe a XKHJ3 version without the region code?

I hope the story is clear enought, because my english isn't that well. Thx in advanced!

Posted
sorry batistian i wanna made a cab..but may pc got busy.....and now i read that Shokka will made a cab...

make one bro.

i dont have time....?

off to bed now :)

laters, back Sunday sometime, maybe later....

Guest Batistian
Posted
I hope you guys can help me. A few days ago I decided to flash my omnia to shokka's v21 rom, without any problems. I loved it, but I wanted to go back to my old official samsung ROM (Dutch) XKHJ3. I downloaded the official dutch ROM XKHJ3 again and tried to flash it back.

I've not tried it on a Dutch ROM before and it's not clear how you do it, but let's try this:

1 ) Remove your SIM & Memory cards from your device.

2 ) Hard-Reset your device.

3 ) Install only your registry editor.

4 ) Edit your registry to XKHH4 (the first older Dutch ROM).

5 ) Soft-Reset your device.

6 ) Flash to XKHJ3 as normal.

Please post your result.

Guest Batistian
Posted (edited)
sorry batistian i wanna made a cab..but may pc got busy.....and now i read that Shokka will made a cab...

I'm a noob, I don't know how to make a cab. I only know how to take cab. :)

Edited by Batistian
Guest CJaKfOrEsT
Posted (edited)
This problem of mine :)

I would like to send an email :)

Firstly, thanx Shokka9 for what can be best described as a "work of art". I've jumped on board you WM6.5 roms since about v16 (I think that was the last "last rom" you were going to make :)), but this one has a real finished feel. Even simple little things like how the radio buttons are pixelated. I'm also yet to have a Titanium plugin that didn't work (had a few in v20). Vice nice bro, my hat's off to you.

Two little things, though. When I composed an email, there is no "send" button, and no send function in the menu. I found an odd work around, by saving it to "Drafts" and then moving it to the "Outbox", but that is less than ideal. Also (at the risk of sounding anal) the robot in the slider on Smart Lock, is a nice touch, but it would have been better if it carried through when it actually sides. If you can let me know the location of the slider image, I'll knock up a quick fix, for myself personally, and share it with you guys.

Again, thanx for all your tireless effort with your roms. I hope your enjoying some of teh reclaimed time you've got now (and I hope your family is gratefull for the loss we have all endured :)).

CJ

Edited by CJaKfOrEsT
Posted
I'm a noob, I don't know how to make a cab. I only know how to take cab. :)

hahahahahah yeaahhh i have my pc work wrong...sighhh tonight i post a cab if i can..

Posted
I've not tried it on a Dutch ROM before and it's not clear how you do it, but let's try this:

1 ) Remove your SIM & Memory cards from your device.

2 ) Hard-Reset your device.

3 ) Install only your registry editor.

4 ) Edit your registry to XKHH4 (the first older Dutch ROM).

5 ) Soft-Reset your device.

6 ) Flash to XKHJ3 as normal.

Please post your result.

I tried again with your advice above, but I still get an Incorrect Version. I can't figure out what I'm doing wrong?

Guest Batistian
Posted
I tried again with your advice above, but I still get an Incorrect Version. I can't figure out what I'm doing wrong?

Do you remember the exact version of the XKHH4?

Like: PDA:something/something, PHONE: something

Posted (edited)

OK i have to go away...and 4 now i post only the registry Key modify by me to make ur TaskBar invisible...i remember to u that u make backup of old registry key because u cant go down one time u copy this file...u have to do all whit an regitry editor and u have to import this key in....HKCU\Software\HTC....and this file modify only 2 value...LauncherDown and LauncherUp...but if u dont know what do u do ......dont do....eehhehe

here the Key...TaskManagerKey

excuse me 4 my english.....

thanks to my friend simoneser who make cab 4 me......this is a .cab....

Hide HTC TaskManager

Edited by zazza70
Posted
Do you remember the exact version of the XKHH4?

Like: PDA:something/something, PHONE: something

Good question. After some research on the internet I found two possible combo's. I thought I had something like this:

PDA: XKHH4/XKHH4

Phone: XXHH9

Posted (edited)

Ctext plug-in cannot be remove by CHome editor because there is Ctext inside and not CText..u understand???try to remove

Edited by zazza70
Guest meabigbaldguy
Posted

Hey Shokka! Did you know that your ROMs have a decent following... on Taril's own forum. :) All of your stuff and even your kitchen is linked there.

Posted
Hey Shokka! Did you know that your ROMs have a decent following... on Taril's own forum. :) All of your stuff and even your kitchen is linked there.

Nope, i didnt..:)

Well, i knew kinda in a ot of Omnia forums...but i never would of thought i could grace Taril's.

Good work!

Thanks for the heads up...I playing MotoGP 07 on my 360....

laters.

Guest Batistian
Posted
Good question. After some research on the internet I found two possible combo's. I thought I had something like this:

PDA: XKHH4/XKHH4

Phone: XXHH9

Have you tried THIS?

Guest CJaKfOrEsT
Posted
Firstly, thanx Shokka9 for what can be best described as a "work of art". I've jumped on board you WM6.5 roms since about v16 (I think that was the last "last rom" you were going to make :P ), but this one has a real finished feel. Even simple little things like how the radio buttons are pixelated. I'm also yet to have a Titanium plugin that didn't work (had a few in v20). Vice nice bro, my hat's off to you.

Two little things, though. When I composed an email, there is no "send" button, and no send function in the menu. I found an odd work around, by saving it to "Drafts" and then moving it to the "Outbox", but that is less than ideal. Also (at the risk of sounding anal) the robot in the slider on Smart Lock, is a nice touch, but it would have been better if it carried through when it actually sides. If you can let me know the location of the slider image, I'll knock up a quick fix, for myself personally, and share it with you guys.

Again, thanx for all your tireless effort with your roms. I hope your enjoying some of teh reclaimed time you've got now (and I hope your family is gratefull for the loss we have all endured :D ).

CJ

Did anyone else have this problem with the email? If so, did anyone else find an answer? :)

Guest BlacKICcE
Posted

Shokka, I really like this ROM design .. so i wanna back it up for future update.. can you tell me (a link/cab maybe..?) what theme are you using for the titanium ? and other things if possible..

thanks :)

Guest Omniatic
Posted

Does anyone have the images ZIP for this touchflo skin on the latest rom? Ive lost it after installing a new theme and theres no file to go back tot he originial [forgot to back it up] ID like to change a few bits anyways access to images would be good where would I find them?

Guest 1968falconxt
Posted

I want to thank you Shokka for this ROM. it is awesome. i have been using it for almost a week now. it is stable, fast and the touch response is great.I have sorted out all of my little issues, all caused by me not knowing how to configure it properly. I have worked it out and set the phone up how i like it :):D

I now prefer using my omnia over an iphone. It is amazing how much difference WM6.5 makes!!

Guest BlacKICcE
Posted
Does anyone have the images ZIP for this touchflo skin on the latest rom? Ive lost it after installing a new theme and theres no file to go back tot he originial [forgot to back it up] ID like to change a few bits anyways access to images would be good where would I find them?

I have the theme backed up (using m2dc) if you want .. i'll upload it ..

Guest Omniatic
Posted (edited)
I have the theme backed up (using m2dc) if you want .. i'll upload it ..

thanks mate, quite annoyed i never backed it up before lol, prefer the tabs/buttons on that one but the white BG of the clock digits on the original HTC look so going to have a mess with them

Edited by Omniatic
Posted
Have you tried THIS?

Wow! It worked! Thanks!

I almost thought I bricked my phone with this methode. But with a soft reset wm6.1 came back alive, because Grand prix stopped and my phone suddenly showed a black screen :S. But I was able to flash the dutch ROM XKHJ3 on my phone from another forum the guy gave. I really recommend this trick to everybody who has problems flashing his (or her :)) phone back!

Thanks again!

Guest 1968falconxt
Posted (edited)

can someone help me. i cant work out how to get the colour start button logo to work with my phone. im using the WM7 black theme, with the touchflow "item" instead of windows default. I have attached a screenshot of my phone.

i tried copying/pasting the image files like Shokka said in a previous post, but it didnt work.

Also, when i go to advanced configuration to edit the touchflow panel (to remove unused buttons or change the date format) it comes up with "an error occured while loading TouchFLOW 3D configuration". it then brings me to the edit screen, but after the soft reset, nothing has changed. please keep in mind i havnt actually installed a full version of touchflow, i am just using what is included in this ROM.

post-580224-1253592810_thumb.jpg

Edited by 1968falconxt

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.