Guest tablebreaker Posted May 25, 2009 Report Posted May 25, 2009 i just tapped the screen profusely until it went through. Hey, I tried this, and still no luck. How long did it take while you were tapping it? Does anyone else have any ideas as to what I should do?
Guest aznricerocket92 Posted May 25, 2009 Report Posted May 25, 2009 i was only tapping it for like 30 secs.
Guest techmaster7545 Posted May 25, 2009 Report Posted May 25, 2009 Hey, I tried this, and still no luck. How long did it take while you were tapping it? Does anyone else have any ideas as to what I should do? would do hard reset then flash again hold down both buttons on bottom and hold them down while pressing your stylus in top hole two times fast
Guest aleis Posted May 26, 2009 Report Posted May 26, 2009 would do hard reset then flash again hold down both buttons on bottom and hold them down while pressing your stylus in top hole two times fast you have to tap the start button area
Guest techmaster7545 Posted May 26, 2009 Report Posted May 26, 2009 you have to tap the start button area whats that for or even going to do
Guest Brutus82 Posted May 26, 2009 Report Posted May 26, 2009 (edited) Silly question about XT9. Is there a way in texting with XT9 Phonepad to force the word "I" instead of getting "G" when pressing the "ghi" button followed by a space. Before I updated the ROM I was always able to do this and now I'm sending texts that look like this... "G will be home in a few. G had to stop and get gas. Yes G did get your last text." Instead of this... "I will be home in a few. I had to stop and get gas. Yes I did get your last text." I tried working with the settings under "Options/ Input Method, Word Completion, Options tabs however, with no luck. Thank You Edited May 26, 2009 by Brutus82
Guest tablebreaker Posted May 26, 2009 Report Posted May 26, 2009 i can't tap where the start button would be because my omnia is freezing on the screen when you turn it on that says Omnia
Guest techmaster7545 Posted May 26, 2009 Report Posted May 26, 2009 i can't tap where the start button would be because my omnia is freezing on the screen when you turn it on that says Omnia that was my point lol
Guest dmcnado Posted May 26, 2009 Report Posted May 26, 2009 I have a problem that I can't seem to find the answer for... I've ran the flasher for Wozzer's firmware, and it completes without error, but when it restarts my omnia, it freezes on the flash screen, and I have to pull the battery to get it to turn off. I've tried reflashing several times, and always get this error! What can I do? Thanks! May seem like old hat to most, but did you flash the leaked CC20 rom first? (see Wozzer's first post of this 6.5 string). You are having the same symptoms I had when I went straight to Wozzer's rom. Once I flashed the leaked CC20, then I had no problems w/ freezing when flashing Wozzer's roms.
Guest techmaster7545 Posted May 26, 2009 Report Posted May 26, 2009 (edited) May seem like old hat to most, but did you flash the leaked CC20 rom first? (see Wozzer's first post of this 6.5 string). You are having the same symptoms I had when I went straight to Wozzer's rom. Once I flashed the leaked CC20, then I had no problems w/ freezing when flashing Wozzer's roms. wrong person sorry Edited May 26, 2009 by techmaster7545
Guest techmaster7545 Posted May 26, 2009 Report Posted May 26, 2009 I have a problem that I can't seem to find the answer for... I've ran the flasher for Wozzer's firmware, and it completes without error, but when it restarts my omnia, it freezes on the flash screen, and I have to pull the battery to get it to turn off. I've tried reflashing several times, and always get this error! What can I do? Thanks! if u have flash the leaked CC20 rom first then i would try holding down answer & end key while with stylus in top hole two times fast then try flashing again
Guest tablebreaker Posted May 26, 2009 Report Posted May 26, 2009 I'm up and running! I reflashed C220, and then flashed Wozzer's, and it's all good now! I just need to customize M2D now!
Guest techmaster7545 Posted May 26, 2009 Report Posted May 26, 2009 I'm up and running! I reflashed C220, and then flashed Wozzer's, and it's all good now! I just need to customize M2D now! thats great glad ur up and running
Guest ribbz Posted May 26, 2009 Report Posted May 26, 2009 hey all, i flashed to .04 a little while ago and i was just wondering if i decided to put SPB MS3 on there would it eliminate the right key's functionality for titanium? if it does, does anyone know how to remap that soft key functionality? i don't want to lose all the uses it has on the home screen.
Guest techmaster7545 Posted May 26, 2009 Report Posted May 26, 2009 (edited) hey all, i flashed to .04 a little while ago and i was just wondering if i decided to put SPB MS3 on there would it eliminate the right key's functionality for titanium? if it does, does anyone know how to remap that soft key functionality? i don't want to lose all the uses it has on the home screen. i have v4 lite with spb ms3 and titanium will not let soft key overwrite i will give you directions how to do the left soft key the right one runs functions for each panel on titanium you will need a reg editor to do this HKEY Local Machine --- software--- Microsoft --- Chome and see sk1url & sk1text PUT THIS IN THERE SK1URL= Program files\Spb Mobile Shell\MenuLauncher.exe SK1TEXT= Spb Home this is the only way without haveing to disable titanium Edited May 26, 2009 by techmaster7545
Guest ribbz Posted May 26, 2009 Report Posted May 26, 2009 i have v4 lite with spb ms3 and titanium will not let soft key overwrite i will give you directions how to do the left soft key the right one runs functions for each panel on titanium you will need a reg editor to do this HKEY Local Machine --- software--- Microsoft --- Chome and see sk1url & sk1text PUT THIS IN THERE SK1URL= Program files\Spb Mobile Shell\MenuLauncher.exe SK1TEXT= Spb Home this is the only way without haveing to disable titanium thanks a bunch! appreciate it!
Guest techmaster7545 Posted May 26, 2009 Report Posted May 26, 2009 (edited) thanks a bunch! appreciate it! Any Time i added a extra panel in spb lifestyle screen if u interested it comes with three but u can add up to 8 that i know of Edited May 26, 2009 by techmaster7545
Guest Dblocker Posted May 26, 2009 Report Posted May 26, 2009 Silly question about XT9. Is there a way in texting with XT9 Phonepad to force the word "I" instead of getting "G" when pressing the "ghi" button followed by a space. Before I updated the ROM I was always able to do this and now I'm sending texts that look like this... "G will be home in a few. G had to stop and get gas. Yes G did get your last text." Instead of this... "I will be home in a few. I had to stop and get gas. Yes I did get your last text." I tried working with the settings under "Options/ Input Method, Word Completion, Options tabs however, with no luck. Thank You +1 KeyPad does the same thing - wants to use U instead of I. Most annoying thing about xT9. Hope someone can figure it out.
Guest Richard713 Posted May 26, 2009 Report Posted May 26, 2009 updated to the m2d version love everything about it but the analog clock on all m2d themes is not working using the stock rom no other prog installs on the phone anyone have any ideas of what the issue is?
Guest tm31 Posted May 26, 2009 Report Posted May 26, 2009 The same thing happened to my phone, and now it is in the so-called Monahans state where it won't power on and Windows asks for a Monahans driver. I have not seen any way of reflashing it from this state. I'd like to figure out what went wrong so that I can put Wozzer's ROM on my new Omnia when I get it later this week... if I can work up the courage to do so... lol. Same thing happened to mine. CC20 flash went fine but now im bricked. Is verizon giving you a new phone or did you have to buy one?
Guest techmaster7545 Posted May 26, 2009 Report Posted May 26, 2009 Same thing happened to mine. CC20 flash went fine but now im bricked. Is verizon giving you a new phone or did you have to buy one? Try this hold down the answer & end buttons,keep holding them and then turn it on and wait for the screen to say Omnia, then press with the stylus the top hole twice.Then reflash cc20
Guest techmaster7545 Posted May 26, 2009 Report Posted May 26, 2009 Hope everyone is doing good today !!! Wozzer cant wait for "21234"
Guest MrSmoofy Posted May 26, 2009 Report Posted May 26, 2009 Anyone having trouble with battery life? Seems I can't go more then 8 hours before the battery is completly dead so dead that it won't turn on or even charge. I usually have to remove the battery and then plug it in. Then once I turn it on it was so dead the clock is even reverted back to 12:00 And now it won't even charge I've tried the AC, car, and USB and nothing. Any ideas?
Guest techmaster7545 Posted May 26, 2009 Report Posted May 26, 2009 (edited) Anyone having trouble with battery life? Seems I can't go more then 8 hours before the battery is completly dead so dead that it won't turn on or even charge. I usually have to remove the battery and then plug it in. Then once I turn it on it was so dead the clock is even reverted back to 12:00 And now it won't even charge I've tried the AC, car, and USB and nothing. Any ideas? my friend had one that did that and found out it was just a bad battery got a new one then all was fine if you feel thats not it then not sure i keep all bluetooth and other stuff in easy settings off until i need them my battery last abt 2 days if i just txt & calls if i use the phone all programs then abt 1 day Edited May 26, 2009 by techmaster7545
Guest semmtexx Posted May 26, 2009 Report Posted May 26, 2009 I'm trying to install that GC Java Pack 1.2.6 that was posted as working well for the fmail/other google apps. It wont let me install because of permissions. Is there a way around this and also do i even need it because there is already some java app on here already?
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now