Guest jmart518 Posted June 1, 2009 Report Posted June 1, 2009 Excellent job kabkab! It is working smooth now just like dwallersv said! Thank you for this!
Guest disciplined Posted June 1, 2009 Report Posted June 1, 2009 (edited) works on my Verizon i910 with Wozzer's wm 6.5 v.04 Big thanks for this. Edited June 1, 2009 by disciplined
Guest bga7x Posted June 1, 2009 Report Posted June 1, 2009 (edited) If you are using my rom no need to install the certs just install the this cab to device memory and you are good to go and yes this works with Batti Bgill55_New_1.cab Edited June 1, 2009 by bga7x
Guest WoZZeR999 Posted June 2, 2009 Report Posted June 2, 2009 Kabkab, mind if I include it in my roms?
Guest bga7x Posted June 2, 2009 Report Posted June 2, 2009 Kabkab, mind if I include it in my roms? +1
Guest kabkab Posted June 2, 2009 Report Posted June 2, 2009 (edited) For all ROM-makers (and everyone else) - yes, i don't mind to include this driver to you ROMs (btw, thx to you work!!!) or anywhere else! Edited June 2, 2009 by kabkab
Guest sector Posted June 2, 2009 Report Posted June 2, 2009 thank you kabkab. can i also? :) so after reading all comments it works as it should on i900! right? <_<
Guest kabkab Posted June 2, 2009 Report Posted June 2, 2009 (edited) so after reading all comments it works as it should on i900! right? <_< again: on my i900 it's working good. i have wm6.1 and DXID1 firmware. i did not checked against wm6.5 or i910 (i don't have such device). i900 don`t work :) what don't work? did not shown or some bugs? do you install it correctly? checked, that file copied and overwrite original? make soft reset? Edited June 2, 2009 by kabkab
Guest allbest Posted June 2, 2009 Report Posted June 2, 2009 again: on my i900 it's working good. i have wm6.1 and DXID1 firmware. i did not checked against wm6.5 or i910 (i don't have such device). what don't work? did not shown or some bugs? do you install it correctly? checked, that file copied and overwrite original? make soft reset? i have wm6.1 and DXID1 firmware show 10% install it correctly - yes soft reset - yes
Guest scubamike Posted June 2, 2009 Report Posted June 2, 2009 I have the I910 and used the I910-specific file and back light won't shut off while on battery power. It stays off only when charging. Any thoughts?
Guest Franquicia Posted June 2, 2009 Report Posted June 2, 2009 I've install this patch and: From 70% batt > Soft Reset > to 46%. And now I dont know when my i900 is charging (Charge Icon dissabled).
Guest noshet Posted June 2, 2009 Report Posted June 2, 2009 For me, I'm with I900, Sector's Q1 rom, winmo 6.5 DXID1 firmware. It is working good now. don't find any issues with backlight, etc. But haven't tried with wall charge yet, need to get home first...still at work <_< Thanks Kabkab...
Guest kabkab Posted June 2, 2009 Report Posted June 2, 2009 To all users having some issues with 1% battery driver Sorry, may be you have different firmware, may be you device have some miscompatibility with this patch. I don't know and have no ability to install different firmware to my device and check each one. Just assume, that you cannot use this driver and rollback to original one.
Guest kabkab Posted June 2, 2009 Report Posted June 2, 2009 i have wm6.1 and DXID1 firmware show 10% install it correctly - yes soft reset - yes very strange. and what show original driver? bcoz i have same device and same firmware and no problems... (right now, after 1 day of heavy usage i have 73%, original driver show me 80%).
Guest gianton Posted June 2, 2009 Report Posted June 2, 2009 (edited) Thanks kabkab! Great work my friend. <_< Works great on my i900 with WM6.5 and Khuanchai's Omnia UltraLite ROM base DXID1 build 21725. PS: Did not install Certs.cab and it's working, should I install it anyway? Edited June 2, 2009 by gianton
Guest fane Posted June 2, 2009 Report Posted June 2, 2009 Hello.I have also Khuanchai's rom but i have also Grigoris task bar and this app doesnt work for me so i assume we have to stay with original taskbar.Thanks for your share
Guest dwallersv Posted June 2, 2009 Report Posted June 2, 2009 Folks having trouble: There are two versions of the patch, one for the 900, the other for the 910. They have the same filename in this thread. The 900 version is in the first post, the 910 version in a later post where the text specifically says its for the 910. Make sure you have the right one for your phone!!
Guest jofficus Posted June 3, 2009 Report Posted June 3, 2009 (edited) Maybe I'm being stupid, but I can't seem to do anything with my zylonite_battdrvr.dll file in Resco Explorer. It is listed as hidden, read only, and system - and I can't seem to change any of those settings through Resco. And, without changing those settings, I also can't seem to copy/backup/rename the original file on my Omnia at all, before replacing your new patched file. Does anyone have any advice? I am running the newest version of Resco Explorer on Wozzers Lite version of the wm6.5 rom. Thanks for any help you guys can give me! Edit: My bad, I am using an Omnia i910 Edited June 3, 2009 by jofficus
Guest fclifton Posted June 3, 2009 Report Posted June 3, 2009 (edited) I have the I910 and used the I910-specific file and back light won't shut off while on battery power. It stays off only when charging. Any thoughts? Same here <_< Stock ROM Edited June 3, 2009 by fclifton
Guest Takarin Posted June 3, 2009 Report Posted June 3, 2009 Folks having trouble: There are two versions of the patch, one for the 900, the other for the 910. They have the same filename in this thread. The 900 version is in the first post, the 910 version in a later post where the text specifically says its for the 910. Make sure you have the right one for your phone!! I'm having the same issue. Only difference is that I have the stock i910 ROM.
Guest hawkjm73 Posted June 3, 2009 Report Posted June 3, 2009 Maybe I'm being stupid, but I can't seem to do anything with my zylonite_battdrvr.dll file in Resco Explorer. It is listed as hidden, read only, and system - and I can't seem to change any of those settings through Resco. And, without changing those settings, I also can't seem to copy/backup/rename the original file on my Omnia at all, before replacing your new patched file. Does anyone have any advice? I am running the newest version of Resco Explorer on Wozzers Lite version of the wm6.5 rom. Thanks for any help you guys can give me! Edit: My bad, I am using an Omnia i910 Using an i910 with Resco on Wozzer's Lite wm6.5 v5, I also had this problem. After a bit of quality time with google, I decided that this is due to the file being part of the ROM. It was claimed that the file could not be changed, copied, nor deleted, but it could be overwritten. Supposedly, if the new file was later deleted, the old one would resurface, never really having been deleted, just subverted. I decided to attempt a backupless overwrite as I had a fresh SPBBackup of all my programs and could reflash the ROM if need be. It worked, and after a soft reset, I had my 1% readings. (yea!!!) I have not tried deleting the new DLL, so I cannot vouch for being able to restore the old driver. I cannot claim that this will work safely on any other phone, or even on mine tomorrow, so try at your own risk. Based on his interest, I suspect that this driver will be included in Wozzer's v6, so you might just want to wait for that release. He can probably test stuff way more then my own "It hasn't crashed yet..."
Guest sector Posted June 3, 2009 Report Posted June 3, 2009 cooked on i900 rom and works pretty nice no problems so far! <_< thanks kabkab
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now