Guest shpitz Posted June 13, 2009 Report Posted June 13, 2009 I Flash DXID1_21812_vU1aL in my Omnia And the align screen is in loop, impossible to pass to mthe next screen. please HELP.
Guest sector Posted June 13, 2009 Report Posted June 13, 2009 get an external reg editor like: CeRegit (it is free) http://ceregeditor.mdsoft.pl/ when u connect via activesync, open the regeditor and browse to this path [HKEY_LOCAL_MACHINE\Software\Microsoft\Welcome] . change the dword value to below. this will disable the welcome screen. wait 30 seconds and reboot. [HKEY_LOCAL_MACHINE\Software\Microsoft\Welcome] "Disable"=dword:000000FF
Guest shpitz Posted June 13, 2009 Report Posted June 13, 2009 Sector !!!! thanks you are the best . my omnia work yessss thanks thanks
Guest LORD JUNIOR Posted June 15, 2009 Report Posted June 15, 2009 hay secter do you have the files of your align screen when the one at boot up when you flash? so i could place them in mine please. i'v tride everything but the menus are all off like in setting and everything else. please
Guest davinci2007 Posted June 16, 2009 Report Posted June 16, 2009 get an external reg editor like: CeRegit (it is free) http://ceregeditor.mdsoft.pl/ when u connect via activesync, open the regeditor and browse to this path [HKEY_LOCAL_MACHINE\Software\Microsoft\Welcome] . change the dword value to below. this will disable the welcome screen. wait 30 seconds and reboot. [HKEY_LOCAL_MACHINE\Software\Microsoft\Welcome] "Disable"=dword:000000FF It not possible to use the Regeditor. I have no change because loop and loop and loop. Preconfiguration and loop.....etc. And now? Other solution? Anybody same Problem? Thanks.
Guest andylyf Posted June 16, 2009 Report Posted June 16, 2009 It not possible to use the Regeditor. I have no change because loop and loop and loop. Preconfiguration and loop.....etc. And now? Other solution? Anybody same Problem? Thanks. Do you understand what this means? "get an external reg editor"
Guest davinci2007 Posted June 16, 2009 Report Posted June 16, 2009 Do you understand what this means? "get an external reg editor" No, sorry. Explain me please. How with an external reg editor?
Guest andylyf Posted June 16, 2009 Report Posted June 16, 2009 No, sorry. Explain me please. How with an external reg editor? It runs on desktop PC but operates on a mobile device. With this feature user is able to user a normal keyboard, mouse.
Guest davinci2007 Posted June 16, 2009 Report Posted June 16, 2009 It runs on desktop PC but operates on a mobile device. With this feature user is able to user a normal keyboard, mouse. Slow now. I have a PC and the Omnia Handy. I start the Omnia than i have a short connect activsync between pc and omnia. But ...i read Preconfiguration and then start automatically my Omnia new. I have no change to use an external reg editor. Sorry it´s a little bit difficult to explain. My bad english. :D
Guest davinci2007 Posted June 16, 2009 Report Posted June 16, 2009 The Time ist too short. I can´t use reg editor. Reboot after 10 sec. :-(
Guest sector Posted June 16, 2009 Report Posted June 16, 2009 did u try to reflash? smth it isnt right to loop all the time. remove ur sim card before flashing. hard reset 2 times after.
Guest davinci2007 Posted June 16, 2009 Report Posted June 16, 2009 Yes i have it. I reflash several. No success.
Guest davinci2007 Posted June 16, 2009 Report Posted June 16, 2009 Ok. The SIM is out. Now i can change in the Registry. But as default is already disable. I also saw no reboot. Hardreset too. SIM inside omnia. Grrrrrrrrr.....Preconfiguration and reboot again.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now