Guest srqtrader Posted January 15, 2010 Report Posted January 15, 2010 yes i have had the same problem - after removal...open calander again then close and the lock screen is cleared.
Guest VirgilO Posted January 15, 2010 Report Posted January 15, 2010 Hello, I'm using the 28205 M2D, and on the home weather tab, (on the clock) I can't get the weather to find my position it says no weather data available and when google asks about my location it shows nothing.. in google maps it sees my location corectly. the normal weather works fine. also my wifi conections is extremely slow.. Love the rom and i would like to keep it.. if sombody could point me to a fix I would be grateful :) So.. nobody has any idea?
Guest srqtrader Posted January 15, 2010 Report Posted January 15, 2010 So.. nobody has any idea? limited bandwidth will interrupt server's connection for updated info/data
Guest srqtrader Posted January 15, 2010 Report Posted January 15, 2010 So.. nobody has any idea? also try using a diff. server.
Guest casualt Posted January 15, 2010 Report Posted January 15, 2010 when i go to flash it keeps saying timeout-- timeout-- timeout-- timeout-- timeout-- PDA Device not found. WHAT DO I DO? I STILL NEED HELP!?!?!??!
Guest remmyhi Posted January 15, 2010 Report Posted January 15, 2010 I STILL NEED HELP!?!?!??! I think that before installing any driver (remember - only XP) you need to install Samsung CDMA Modem driver (from Samsung webpage). Then it must work. best regards r
Guest srqtrader Posted January 15, 2010 Report Posted January 15, 2010 (edited) I think that before installing any driver (remember - only XP) you need to install Samsung CDMA Modem driver (from Samsung webpage). Then it must work. best regards r no driver needs to be installed. what cdma modem driver? ok listen... if you are using XP... Just install the latest ActiveSync turn off phone...not standby (pull your batt. out and put it back in if you are unsure) plug data cable into pc and phone run .exe file turn on phone once it is on, the pc will detect new device and the flash button will be availble click it and wait if this doesnt work, you need to check your voltage on the usb port to make sure it isn't fluct. alot. some computers have unstable usb voltages that will cause the pc to think the device is not there while in use. this temp. interrupt will time out the connection. bam...it's done! NOTE: you better be using a GSM i900 unbranded and not a CDMA one... or you will risk owning a fancy paperweight... Edited January 15, 2010 by srqtrader
Guest wolfpack64 Posted January 15, 2010 Report Posted January 15, 2010 My version 28205 lite does, offfcourse with dialer skin enabled how do you enable the dialer skin??
Guest DnA1409 Posted January 15, 2010 Report Posted January 15, 2010 (edited) Hey, Anyone know how to change the screen tap sound as the default is a little too loud and annoying (especially when typing messages). I would like to change it to a 'click' noise if possible. P.S I already know about turning the volume down, however, this will also turn the ringing volume down and i need it to be loud. P.S.S When touching the screen i dont get the soft vibration when touched unlike the last ROM i had installed. I cant find a setting for it anywhere, can anyone fill me in please? Edited January 15, 2010 by DnA1409
Guest VirgilO Posted January 15, 2010 Report Posted January 15, 2010 (edited) also try using a diff. server. this happens on my wirelless at how with full signal and when connected to my computer as well.. Edited January 15, 2010 by VirgilO
Guest DnA1409 Posted January 15, 2010 Report Posted January 15, 2010 Have figured out since my last post that you can actually switch between ringing volume and the system volume. This has helped me quieten the sound but would still be nice to be able to change the actual tone if possible and even better with vibration or even vibration on its own.
Guest Dr. Asimov Posted January 16, 2010 Report Posted January 16, 2010 I STILL NEED HELP!?!?!??! Are you connecting the cable through a USB Hub of some sort? This won't work for me. Only direct connection to the computer's usb port.
Guest srqtrader Posted January 16, 2010 Report Posted January 16, 2010 how do you enable the dialer skin?? use advance config tool (it will require a soft reset to activate)
Guest srqtrader Posted January 16, 2010 Report Posted January 16, 2010 this happens on my wirelless at how with full signal and when connected to my computer as well.. bro...i am talking about a diff. server for the updated weather data... if your wifi is slow...disable ip6 if it's enabled on your router... and use WPA2-PSK for security... wep doesnt work so well in mixed environ.
Guest srqtrader Posted January 16, 2010 Report Posted January 16, 2010 Have figured out since my last post that you can actually switch between ringing volume and the system volume. This has helped me quieten the sound but would still be nice to be able to change the actual tone if possible and even better with vibration or even vibration on its own. bro. use touchfl to change/enable the vibrate on touch/taps
Guest srqtrader Posted January 16, 2010 Report Posted January 16, 2010 Are you connecting the cable through a USB Hub of some sort? This won't work for me. Only direct connection to the computer's usb port. if you connect through a hub...you must make sure the voltage over usb is stable... most hubs and splitters are unstable when it comes to voltage...causing intermit. drops...which in turn tells your computer the device is not there... so test your voltage. mine connects through a hub with 7 other devices w/ no problems... also syncs via bluetooth with no prob.
Guest X-pro Posted January 16, 2010 Report Posted January 16, 2010 yes it does, change your settings for vibrate and you're good. Sry to ask, but where do you change that ?? Phonepad dosn't seem to have that option
Guest X-pro Posted January 16, 2010 Report Posted January 16, 2010 use advance config tool (it will require a soft reset to activate) http://www.touchxperience.com/en/advanced-.../downloads.html
Guest DnA1409 Posted January 16, 2010 Report Posted January 16, 2010 bro. use touchfl to change/enable the vibrate on touch/taps Thanks for your help but cant find touchfl, is this a settings application for touchflo?
Guest CosMo82 Posted January 16, 2010 Report Posted January 16, 2010 after removal...open calander again then close and the lock screen is cleared. oh ok thanks i will give it a try cheers~
Guest VirgilO Posted January 16, 2010 Report Posted January 16, 2010 bro...i am talking about a diff. server for the updated weather data... if your wifi is slow...disable ip6 if it's enabled on your router... and use WPA2-PSK for security... wep doesnt work so well in mixed environ. yea that's how my router is configured.. acctually the problem was with my conections and operator settings, had to figure out by trying each setting wich are the correct ones.. wish there would have been a tutorial or something.. anyway it's kind working now :) thanks for the help .. i apreciate it.
Guest casualt Posted January 16, 2010 Report Posted January 16, 2010 no driver needs to be installed. what cdma modem driver? ok listen... if you are using XP... Just install the latest ActiveSync turn off phone...not standby (pull your batt. out and put it back in if you are unsure) plug data cable into pc and phone run .exe file turn on phone once it is on, the pc will detect new device and the flash button will be availble click it and wait if this doesnt work, you need to check your voltage on the usb port to make sure it isn't fluct. alot. some computers have unstable usb voltages that will cause the pc to think the device is not there while in use. this temp. interrupt will time out the connection. bam...it's done! NOTE: you better be using a GSM i900 unbranded and not a CDMA one... or you will risk owning a fancy paperweight... of course gsm answer was needed to use xp
Guest Rafael Lopez Posted January 17, 2010 Report Posted January 17, 2010 My version 28205 lite does, offfcourse with dialer skin enabled My Manila 28205 won't do video-calls; something to do with the Manila build or should I just enable this dialer skin? How to do that?
Guest iyancoolbgt Posted January 17, 2010 Report Posted January 17, 2010 please reupload Build 28205 in mediafire please, 4shared is too slow for my connection, thanks
Guest X-pro Posted January 17, 2010 Report Posted January 17, 2010 (edited) My Manila 28205 won't do video-calls; something to do with the Manila build or should I just enable this dialer skin? How to do that? http://www.touchxperience.com/en/advanced-.../downloads.html for advanced configuration manager ver 3.3 in that you enable dialerskin. Edited January 17, 2010 by X-pro
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now