Jump to content

SYOK Tutorial for WM 6.1+Flash3+NET3.5+Widgets

Guest mario.omnia

By Guest mario.omnia
in i900 / General Omnia ROM Discussion

 Share

Recommended Posts

Guest mario.omnia

Guest mario.omnia

Posted
Posted (edited)

Hi everyone,

I have successfully made a 6.1 ROM with FlashLite 3.1, .NETCF 3.5 and SamsungOnlineWidgets couple of times...

I have flashed it onto my Omnia and tested it out...it worked flawlessly...

(It should work fine because there are no other customizations than those mentioned above)

It's been a while I wanted to cook it for myself...a ROM capable of displaying Flash Web pages (most of them at least)

with working SamsungOnlineWidgets...and here I am now...

I have made a tutorial for you to be able to do it also...(tutorial is just for adding Flash 3, .NET 3.5 and OnlineWidgets)

When you get into the process of cooking a ROM after a few attempts you'll be able to cook in apps of your choice

with no problem...

So if you're interested download the tutorial in format of your choice (.DOC or .PDF) and read it before trying anything...

The tools used by me in this tutorial are:

1. SYOK kitchen - you can download it from Shokka's thread on ROM building

2. UnSigner tool - you can download it from Sector's post in the s0ck's thread about this issue (Flash3+OnlineWidgets)

3. HEX editor of your choice - I used XVI32 editor (freeware)

4. FlashLite 3.1 by LuFeIg CAB

5. .NETCF 3.5 CAB

6. Package Creator 2.7 - you can download it from xd-developers forum (just register and that's it)

The tutorial:

PDF version:

http://rapidshare.com/files/271408154/SYOK...ng_a_WM_6_1.pdf

DOC version:

http://rapidshare.com/files/271408107/SYOK...ng_a_WM_6_1.doc

Enjoy and happy cooking...

-------------------------------------------------------------------------------------

Links to tools required for cooking:

SYOK (Shokka's thread):

Part 1: http://www.mediafire.com/?monieznminm

Part 2: http://www.mediafire.com/?qimxqyy1mxz

Part 3: http://www.mediafire.com/?glz2ztyny1m

Part 4: http://www.mediafire.com/?quwtm5lknmj

Part 5: http://www.mediafire.com/?ymjjbjtvtyg

UnSigner (Sector's post in s0ck's thread):

http://www.modaco.com/index.php?act=attach...st&id=29932

XVI32 HEX Editor (their official site):

http://www.chmaas.handshake.de/delphi/free...32.htm#download

Package Creator 2.8 (xda-developers forum):

http://forum.xda-developers.com/attachment...mp;d=1210022225

Edited by mario.omnia
Guest Broda

Guest Broda

Posted
Posted

Hey Mario, in this your new rom you can change the audio settings with the *#0002*28346# command ?

Guest mario.omnia

Guest mario.omnia

Posted
Posted
Hey Mario, in this your new rom you can change the audio settings with the *#0002*28346# command ?

i just tried it...and the answer is YES...

what is that menu for...

didn't use it so far...

Guest Broda

Guest Broda

Posted
Posted (edited)
i just tried it...and the answer is YES...

what is that menu for...

didn't use it so far...

Sorry for my bad english

Thanks very much Mario. You and Shokka9 help me a lot

This Menu is for the Audio Control Utility. So, you can change the Audio Values for your Omnia

The *#0002*28346# responds to the \windows\SoundTester.exe

I don´t have this SoundTester.exe in my Rom, so a will add it in my next rom

You can see about the Soundtester.exe and the *#0002*28346# in http://www.modaco.com/content/i9x0-omnia-h...-volume-levels/

Another question for you about your tutorial

...

14 - After conversion copy the package folders into the OEM folder of your ROM in the kitchen's directory.

15 - Assemble the new customer.csc file with i900EXEcutor. (i900EXEcutor will make a Customer_CSC_NEW folder in the Customer_CSC folder of your kitchen's directory)

16 - Copy the new customer.csc file over the one in the kitchen's root directory.

17 - Drag the os.nb file onto BuildROM.cmd ( a BuildOS window will pop up showing the apps you have added in the OEM folder earlier, if they are not selected select them manually and press the play button-green triangle and wait for the builder to finish the process)

...

The question is...

We don´t have to rename the customer.csc to CSC.BIN ?

Edited by Broda
Guest mario.omnia

Guest mario.omnia

Posted
Posted
Sorry for my bad english

Thanks very much Mario. You and Shokka9 help me a lot

This Menu is for the Audio Control Utility. So, you can change the Audio Values for your Omnia

The *#0002*28346# responds to the \windows\SoundTester.exe

I don´t have this SoundTester.exe in my Rom, so a will add it in my next rom

You can see about the Soundtester.exe and the *#0002*28346# in http://www.modaco.com/content/i9x0-omnia-h...-volume-levels/

Another question for you about your tutorial

...

14 - After conversion copy the package folders into the OEM folder of your ROM in the kitchen's directory.

15 - Assemble the new customer.csc file with i900EXEcutor. (i900EXEcutor will make a Customer_CSC_NEW folder in the Customer_CSC folder of your kitchen's directory)

16 - Copy the new customer.csc file over the one in the kitchen's root directory.

17 - Drag the os.nb file onto BuildROM.cmd ( a BuildOS window will pop up showing the apps you have added in the OEM folder earlier, if they are not selected select them manually and press the play button-green triangle and wait for the builder to finish the process)

...

The question is...

We don´t have to rename the customer.csc to CSC.BIN ?

yes, my mistake...

you should rename it to csc.bin...

will correct the error in tutorial ASAP...

thanx...

Guest Broda

Guest Broda

Posted
Posted (edited)

I will try to create the packages right now to create my new ROM

To create packs using package Creator v2.7, You said:

1. create a folder on desktop (just for this test) and copy Package Creator files into it...

(now in that folder you should have package creator files: package-creator-v2.7.exe, lang.xml, cablib.dll)

2. now in that folder copy your: NETCFv35.wm.armv4i.cab, Adobe_Flash_Lite_3.1.cab

(now in that folder you should have package creator files with your CABs...)

3. in that folder double click on package-creator-v2.7.exe to start package creator

(now the package creator window will open....)

4. click on "Open CAB file" and point to your CAB in this directory...

(a window will open showing files in this directory...)

5. double click on the CAB you want to convert to package...

(when you double click the CAB after a few seconds you will get a message "Done" and that's it)

6. now you open package creator folder...

(there should be a new directory called like the CAB that you have converted...)

7. copy that directory (the new directory) into OEM folder of the ROM you're building...

8. customize the ROM or if you did that before start building it...

9. in the build os you should see the apps you have added to OEM folder...

My question/doubt is after the step 6

Button (Open cab file) = Select language for packge to create = English

Button (Open Package) = Select group to insert package = Programs

It´s OK, right?

This option (Remodule all exe-dll-mui files into created package), needs to be checked ?

The TAB initifiles.txt, needs to do something in this tab ? Need to check some boxes inside ?

Sorry for my bad english

Thanks Mario

Edited by Broda
Guest mario.omnia

Guest mario.omnia

Posted
Posted
I will try to create the packages right now to create my new ROM

To create packs using package Creator v2.7, You said:

1. create a folder on desktop (just for this test) and copy Package Creator files into it...

(now in that folder you should have package creator files: package-creator-v2.7.exe, lang.xml, cablib.dll)

2. now in that folder copy your: NETCFv35.wm.armv4i.cab, Adobe_Flash_Lite_3.1.cab

(now in that folder you should have package creator files with your CABs...)

3. in that folder double click on package-creator-v2.7.exe to start package creator

(now the package creator window will open....)

4. click on "Open CAB file" and point to your CAB in this directory...

(a window will open showing files in this directory...)

5. double click on the CAB you want to convert to package...

(when you double click the CAB after a few seconds you will get a message "Done" and that's it)

6. now you open package creator folder...

(there should be a new directory called like the CAB that you have converted...)

7. copy that directory (the new directory) into OEM folder of the ROM you're building...

8. customize the ROM or if you did that before start building it...

9. in the build os you should see the apps you have added to OEM folder...

My question/doubt is after the step 6

Button (Open cab file) = Select language for packge to create = English

Button (Open Package) = Select group to insert package = Programs

It´s OK, right?

This option (Remodule all exe-dll-mui files into created package), needs to be checked ?

The TAB initifiles.txt, needs to do something in this tab ? Need to check some boxes inside ?

Sorry for my bad english

Thanks Mario

Hi,

sorry for being late...didn't quite have the time to read the thread...

...I don't get those questions...

all I have to do is double clik the CAB in package creator and in a few seconds it says it's done...

I didn't make any customizations of the conversion...

and so far all the apps I cooked in the ROM work fine...no bugs so far...

so I suggest to leave everything at deault settings...

(maybe there is a difference in our version os package creator...I have Package Creator 2.7 donwloaded from xda-developers...)

so check that...maybe you have a newer version...

Guest Morad kassem

Guest Morad kassem

Posted
Posted
Hi everyone,

I have successfully made a 6.1 ROM with FlashLite 3.1, .NETCF 3.5 and SamsungOnlineWidgets couple of times...

I have flashed it onto my Omnia and tested it out...it worked flawlessly...

(It should work fine because there are no other customizations than those mentioned above)

It's been a while I wanted to cook it for myself...a ROM capable of displaying Flash Web pages (most of them at least)

with working SamsungOnlineWidgets...and here I am now...

I have made a tutorial for you to be able to do it also...(tutorial is just for adding Flash 3, .NET 3.5 and OnlineWidgets)

When you get into the process of cooking a ROM after a few attempts you'll be able to cook in apps of your choice

with no problem...

So if you're interested download the tutorial in format of your choice (.DOC or .PDF) and read it before trying anything...

The tools used by me in this tutorial are:

1. SYOK kitchen - you can download it from Shokka's thread on ROM building

2. UnSigner tool - you can download it from Sector's post in the s0ck's thread about this issue (Flash3+OnlineWidgets)

3. HEX editor of your choice - I used XVI32 editor (freeware)

4. FlashLite 3.1 by LuFeIg CAB

5. .NETCF 3.5 CAB

6. Package Creator 2.7 - you can download it from xd-developers forum (just register and that's it)

The tutorial:

PDF version:

http://rapidshare.com/files/271408154/SYOK...ng_a_WM_6_1.pdf

DOC version:

http://rapidshare.com/files/271408107/SYOK...ng_a_WM_6_1.doc

Enjoy and happy cooking...

-------------------------------------------------------------------------------------

Links to tools required for cooking:

SYOK (Shokka's thread):

Part 1: http://www.mediafire.com/?monieznminm

Part 2: http://www.mediafire.com/?qimxqyy1mxz

Part 3: http://www.mediafire.com/?glz2ztyny1m

Part 4: http://www.mediafire.com/?quwtm5lknmj

Part 5: http://www.mediafire.com/?ymjjbjtvtyg

UnSigner (Sector's post in s0ck's thread):

http://www.modaco.com/index.php?act=attach...st&id=29932

XVI32 HEX Editor (their official site):

http://www.chmaas.handshake.de/delphi/free...32.htm#download

Package Creator 2.8 (xda-developers forum):

http://forum.xda-developers.com/attachment...mp;d=1210022225

Dear Mario,

Good job you are doing here

Do you know how to flash 6.5 roms as i tried but never success, also 6.1 roms are not working with me.

Guest Morad kassem

Guest Morad kassem

Posted
Posted
Dear Mario,

Good job you are doing here

Do you know how to flash 6.5 roms as i tried but never success, also 6.1 roms are not working with me.

I followed the totorial, & i successfully cooked a WM 6.1 rom with flah lite 3.1 & .Net FC3.5 but the problem is that the samsung widget appears in the today items list is not working with shell32.exe error.

but i installed a cab for the online widgets & it's working fine,

I'll test the rom as i will do another one today to fix the problems i did.

Any way thanks for the tutorial.

still waiting for your answer regarding the wm 6.5 flashing tutorial. full one please including all minor details.

Guest mario.omnia

Guest mario.omnia

Posted
Posted

I followed the totorial, & i successfully cooked a WM 6.1 rom with flah lite 3.1 & .Net FC3.5 but the problem is that the samsung widget appears in the today items list is not working with shell32.exe error.

but i installed a cab for the online widgets & it's working fine,

I'll test the rom as i will do another one today to fix the problems i did.

Any way thanks for the tutorial.

still waiting for your answer regarding the wm 6.5 flashing tutorial. full one please including all minor details.

hi,

sorry for being late...time is not on my side... ;-)

6.1 ROMs I did for myself are working normally...didn't have any problems with the so far...

but 6.5 ROMs I didn't try to customize...since it involves a lot more time and knowledge...

(I succesfully cooked one ROM but I didn't flash it...I simply followed steps mentioned in sector's thread on 6.5 cooking

and a few tips from Loki...I'll post them today when I get back home...maybe it'll make it easier for you...)

the real trouble is if you don't just want to download ported XIP and SYS you have a lot to do...

I downloaded XIP and SYS from Loki and it worked like he said...

but I didn't try to port them myself...since it consumes a lot of time...

I will try during the weekend...maybe I get lucky and everything will work fine...

but if sector, kuanchai and shokka didn't manage to cook ROMs that are bug-free than I suppose I won't be even close...

Guest Morad kassem

Guest Morad kassem

Posted
Posted
hi,

sorry for being late...time is not on my side... ;-)

6.1 ROMs I did for myself are working normally...didn't have any problems with the so far...

but 6.5 ROMs I didn't try to customize...since it involves a lot more time and knowledge...

(I succesfully cooked one ROM but I didn't flash it...I simply followed steps mentioned in sector's thread on 6.5 cooking

and a few tips from Loki...I'll post them today when I get back home...maybe it'll make it easier for you...)

the real trouble is if you don't just want to download ported XIP and SYS you have a lot to do...

I downloaded XIP and SYS from Loki and it worked like he said...

but I didn't try to port them myself...since it consumes a lot of time...

I will try during the weekend...maybe I get lucky and everything will work fine...

but if sector, kuanchai and shokka didn't manage to cook ROMs that are bug-free than I suppose I won't be even close...

Thanks for the cooperative spirit,

Guest mario.omnia

Guest mario.omnia

Posted
Posted
I'm downloading it and will try...

I downloaded the game and installed it...

I got an error (.NET 3.5 related)...

I went to investigate the problem and installed the NETCFG tool from Paul's thread...

and it reported that I have no .NET installed...

this is very interesting...since the building of the ROM went fine and without errors...

later today I'll try to make a new ROM...maybe the .NET version I used was faulty...

thanx for the find...

Guest mario.omnia

Guest mario.omnia

Posted
Posted

I cooked my ROM again...

this time the only thing I did differently was:

I didn't remove .NET and added it later into the OEM folder..

I just selected upgrade to .NET CF 3.5 in SYAKR...

everything else was the same...

now it works normally...

I use netcfg to check the .NET version installed and it reports 3.5...

I didn't check that before..since the build was o.k....but thanx to you

I got that fixed also...

so just select upgrade to .NET CF 3.5 in SYAKR...

and remove Flash Lite 2.1 and Don't warn on unsigned cab...

that's all I did and it works o.k.

Guest Broda

Guest Broda

Posted
Posted
I cooked my ROM again...

this time the only thing I did differently was:

I didn't remove .NET and added it later into the OEM folder..

I just selected upgrade to .NET CF 3.5 in SYAKR...

everything else was the same...

now it works normally...

I use netcfg to check the .NET version installed and it reports 3.5...

I didn't check that before..since the build was o.k....but thanx to you

I got that fixed also...

so just select upgrade to .NET CF 3.5 in SYAKR...

and remove Flash Lite 2.1 and Don't warn on unsigned cab...

that's all I did and it works o.k.

Can you ZIP your Flash3.1 package cab by Luifeig you created using Package cab Creator and upload it here?

Still not working here to see you tube videos directly from browser

Thanks MArio

Guest mario.omnia

Guest mario.omnia

Posted
Posted (edited)
Can you ZIP your Flash3.1 package cab by Luifeig you created using Package cab Creator and upload it here?

Still not working here to see you tube videos directly from browser

Thanks MArio

Hi,

here you are:

http://rapidshare.com/files/277715545/Adob...1_by_LuFeIg.cab

this is the version I used and everything is working fine...

This is probably the only reason why you have trouble...

I tried around 10 or 15 different versions and until I found this one Youtube was not working...

Edited by mario.omnia
Guest Broda

Guest Broda

Posted
Posted
Hi,

here you are:

http://rapidshare.com/files/277715545/Adob...1_by_LuFeIg.cab

this is the version I used and everything is working fine...

This is probably the only reason why you have trouble...

I tried around 10 or 15 different versions and until I found this one Youtube was not working...

Thanks very much Mario

You and Shokka9 help me a lot here

Have you seen the new program to see photos by Resco?

Take a look here, its a NICE finger friendly.

Still in Beta, but works great, and the beta cab is for free :)

PhotoViewerBeta_p.ARM.CAB

Guest Morad kassem

Guest Morad kassem

Posted
Posted

Dear Mario,

Do you know how to use a new build xip & sys files for 6.1 roms or do you know how it goes.

As i want to cook a new rom using wm 6.1 build 21004

Guest mario.omnia

Guest mario.omnia

Posted
Posted
Dear Mario,

Do you know how to use a new build xip & sys files for 6.1 roms or do you know how it goes.

As i want to cook a new rom using wm 6.1 build 21004

Didn't try it...I just needed the Flash to browse the web...

I'm really happy with the current xip & sys...

I'm trying to cook a 6.5 ROM now...

Didn't have much time lately but will try it for sure soon...

Guest Morad kassem

Guest Morad kassem

Posted
Posted
Didn't try it...I just needed the Flash to browse the web...

I'm really happy with the current xip & sys...

I'm trying to cook a 6.5 ROM now...

Didn't have much time lately but will try it for sure soon...

  1. Do u know how to change the splash screens in order to be included in the cooked rom (I mean while cooking).
  2. How to change the back ground while cooking.
  3. How to add theme or today plugin (like Manilla, Titanium).
  4. Start up & shut down sounds.
Guest batuhan

Guest batuhan

Posted
Posted

Hi Mario, keep up the good work

Could you please upload your own cooked rom?

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share
Go to topic listing
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept