Jump to content

Recommended Posts

Guest insoniq
Posted

I'm using Garmin Mobile XT and I'm trying since I got the phone to get a gps signal.

Under GPS signal, its "aquiring satellites" for over 30 mins (longest I've tried), but doesn't get a lock.

Blue bars with numbers below come and dissapear.

Set as Com7:Com7, XTRA downloaded, and in an open place.

I've tried changing the baud rate with same results.

I'm starting to think something is wrong with the unit I have.

Guest tacchan23
Posted

You can try this:

General Settings - GPS

1) GPS program port : COM 7

2) GPS hardware port : COM 9

3) Baud Rate : 9600 ( works ok with me !!! )

4) Enable Manage GPS automatically ( Click ON )

Yesterday I got the first fix after installing Garmin in 3 minutes (with XTRA downloaded)

Guest bentancy
Posted
You can try this:

General Settings - GPS

1) GPS program port : COM 7

2) GPS hardware port : COM 9

3) Baud Rate : 9600 ( works ok with me !!! )

4) Enable Manage GPS automatically ( Click ON )

Yesterday I got the first fix after installing Garmin in 3 minutes (with XTRA downloaded)

as indicated but i chose a baud rate of 4800.

I had the same problem as you and i think the best way for me was to firstly ensure that the latest xtra info was downloaded, and then leave it in an open area for 15mins.

oh, in the setup for the satellite in your GMXT, based on the above, you should chose com7 as the com that is detecting.

Guest x_cal1bur
Posted

Instead of using COM3, I am using GPS Intermediate Driver.

Still experimenting, but at least it won't keep searching for the com port.

Guest andylyf
Posted
Instead of using COM3, I am using GPS Intermediate Driver.

Still experimenting, but at least it won't keep searching for the com port.

Since when Garmin MXT will keep searching for com port?

i have it default @ com3 and never encounter any problems...

Guest x_cal1bur
Posted
Since when Garmin MXT will keep searching for com port?

i have it default @ com3 and never encounter any problems...

If you ever disable the GPS once in Garmin XT and exited.

You could try the difference to see which configuration show the signal bar faster.

Using com there is no problem. Nobody's complaining.

I have set in Windows Mobile to manage GPS automatically, so should let it does its work.

Still experimenting.

Posted

1st time using gps here.

i've installed GMXT and everything's up but just not getting a fix on the satellites.

a noob question here, do i need a port splitter for it to work?

Guest tacchan23
Posted
1st time using gps here.

i've installed GMXT and everything's up but just not getting a fix on the satellites.

a noob question here, do i need a port splitter for it to work?

No, no need.

Did you try the settings I posted before?

Guest insoniq
Posted

The thing is that it's showing satellite info when I'm indoors!

This is under GPS info, the screen with the circles on the top and the bars with satellite numbers below them.

I've downloaded the recent XTRA and tried different baud rates, same results.

I guess I'll try to change the COM ports or something.

Guest spectral77
Posted

it is laggy, often i already passed the turn and mobile xt will prompt me to turn

Guest Stockholm
Posted

I do like TomTom but need gpsgate and it work great but when running it

the proximity sencor don't work, So, the screen will not shut down when I'm on the phone.

I also tried GPSPLEX, did work fine but same problem with proximity sensor.

Anyone succeeded to get any other gpsgate to work without any glitches?

Guest Rothariger
Posted

any fix for this???

i cant get signal in garmin xt, in google maps i can get signal... i have IG6 ROM... i dont know if it is a usefull Info...

Guest Rothariger
Posted

i flashed the secany's rom and now i get fixed position in about 1 minute...

thanks anyway!

  • 3 weeks later...
Guest JasonMa
Posted
i flashed the secany's rom and now i get fixed position in about 1 minute...

thanks anyway!

Hi Roghariger, may i know which version you flashed?

Guest NewForce
Posted (edited)

I had just tried out Garmin Mobile XT yesterday, after someone having problem with over at the other website

Downloaded below files from Garmin and others website

GarminMobileXTforWindowsMobile_50020w.exe

GarminMobileXTFreeBasemap_4xxxx.exe

GarminMobileXTSupportFiles_4xxxx.exe

gmapprom1_2009.5.zip

With Singapore Omnia-2 official WM6.5 from Samsung SC and GPS settings by default settings,

GPS program port = COM7, GPS hardware port = COM9, Baud rate = 4800.

All I can say was, so far so good with GUI look good, all functions and re-routing not bad.

GPS position enabled about 25sec for the first time using this GMXT GPS software.

Consider very fast GPS enabled, but still not as fast as NAVFone which I got it GPS position enabled within 15sec or less, everytime I start it.

post-31662-1258105563_thumb.jpgpost-31662-1258105592_thumb.jpg

Edited by NewForce
Posted
I had just tried out Garmin Mobile XT yesterday, after someone having problem with over at the other website

Downloaded below files from Garmin and others website

GarminMobileXTforWindowsMobile_50020w.exe

GarminMobileXTFreeBasemap_4xxxx.exe

GarminMobileXTSupportFiles_4xxxx.exe

gmapprom1_2009.5.zip

With Singapore Omnia-2 official WM6.5 from Samsung SC and GPS settings by default settings,

GPS program port = COM7, GPS hardware port = COM9, Baud rate = 4800.

All I can say was, so far so good with GUI look good, all functions and re-routing not bad.

GPS position enabled about 25sec for the first time using this GMXT GPS software.

Consider very fast GPS enabled, but still not as fast as NAVFone which I got it GPS position enabled within 15sec or less, everytime I start the it.

post-31662-1258105563_thumb.jpgpost-31662-1258105592_thumb.jpg

do u try using intermediate driver, just change ur gmxt gps setting from com7: to intermediate driver, it is faster than u using com7:com7:

and 1 more thing after u try using igo8 u can see igo8 is faster to got gps position then gmxt

Guest NewForce
Posted (edited)
do u try using intermediate driver, just change ur gmxt gps setting from com7: to intermediate driver, it is faster than u using com7:com7:

and 1 more thing after u try using igo8 u can see igo8 is faster to got gps position then gmxt

I tried iGO8 before, it never beat NAVFone which most of the time it take only 3~10sec to GPS enabled,

you know it's like, the moment I drove my car out of basement/underground carpark, NAVFone start to navigate.

So sometime even my friend was shocked with words,

"WOW! That was super fast. 3seconds? Even at cold start? Even with tall building around? That's Amazing!"

Edited by NewForce
Guest lucasjohny
Posted

hi mate,

no need to use extra just edit the below registry, fix in 10 sec hahaha

hklm/system/currentcontrolset/gps intermediate driver/multiplexer/maxbuffersize from 16384 to 4096 then soft reset....

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.