Guest patje Posted December 1, 2009 Report Posted December 1, 2009 yep same here, i've tried following NPS versions: -New_PC_Studio_1.3.0.IJ1 -New_PC_Studio_1.4.0.IK1 -New_PC_Studio_1.2.1.IH2_5 (indicates an update is availble but isn't able to install) -New_PC_Studio_1.3.0.II4 All of them say my device is unsupported. I tried putting my phone back to factory defaults, no succes. PDA: B7610XXIH2 CSC: B7610LUXII4 TEL: B7610XXIH1 I guess I'll just have to wait (a little more :D ) ps: i'm using an azerty model
Guest Danji Posted December 1, 2009 Report Posted December 1, 2009 The initial update op the NPS software failed multiple times for me as well. Therefore I downloaded the latest NPS (1.4 IK1) from here: http://www.samsungmobile.nl/support/softwa...areNpsUpdate.do I did not try an older NPS version so I cannot confirm if that is your update problem. Can you dump and share your 6.5 ROM?
Guest JeroenFransen Posted December 1, 2009 Report Posted December 1, 2009 (edited) yep same here, i've tried following NPS versions: -New_PC_Studio_1.3.0.IJ1 -New_PC_Studio_1.4.0.IK1 -New_PC_Studio_1.2.1.IH2_5 (indicates an update is availble but isn't able to install) -New_PC_Studio_1.3.0.II4 All of them say my device is unsupported. I tried putting my phone back to factory defaults, no succes. PDA: B7610XXIH2 CSC: B7610LUXII4 TEL: B7610XXIH1 I guess I'll just have to wait (a little more :D ) ps: i'm using an azerty model Normal update still not working (my phone is running Secany´s 6.5, NPS is IK1 running on W7). I just tried to run NPSWMBinaryUpgrader.exe by hand while running NPS in the background. It seems to go well until step 3, where it says there is no network connection. Any ideas on this? Edited December 1, 2009 by JeroenFransen
Guest patje Posted December 1, 2009 Report Posted December 1, 2009 Normal update still not working (my phone is running Secany´s 6.5, NPS is IK1 running on W7). I just tried to run NPSWMBinaryUpgrader.exe by hand while running NPS in the background. It seems to go well until step 3, where it says there is no network connection. Any ideas on this? I'm still on the original 6.1. I tried the binaryupgrader as well, got to the part where I was able to make a backup, but when it should start to download the rom it seems to fail. Doesn't make any sense. I have also been experimenting with different country settings when installing the software, also no succes...
Guest da_mafkeez Posted December 1, 2009 Report Posted December 1, 2009 also no luck here :D btw, what a crappy software is that NPS... lol
Guest da_mafkeez Posted December 1, 2009 Report Posted December 1, 2009 i just called samsung netherlands. they said that if i completed the right procedure of installing NPS, they can do NOTHING for me. i'm sick really sick of samsung and their shitty support. They just hung up the phone when i said that they should fix it...
Guest RethXoth Posted December 1, 2009 Report Posted December 1, 2009 READ THIS! People who have this phone with a brand (like: Vodafone) cannot upgrade! This is due to the fact that Samsung has used a straight-copy from Microsoft itself. If you have Vodafone like me, it would give big trouble updating it like that, it wouldn't have the right information to connect to Vodafone Live etc. So we'll have to wait until Vodafone releases something. (I'm from The Netherlands)
Guest Danji Posted December 1, 2009 Report Posted December 1, 2009 READ THIS! People who have this phone with a brand (like: Vodafone) cannot upgrade! This is due to the fact that Samsung has used a straight-copy from Microsoft itself. If you have Vodafone like me, it would give big trouble updating it like that, it wouldn't have the right information to connect to Vodafone Live etc. So we'll have to wait until Vodafone releases something. (I'm from The Netherlands) I had a vodafone branded. I flashed with i8000 CSC (secany's 6.5) for deleting all brand. Now i tried to flash back to 6.1 (no brand, dumped in this forum) and update with NPS. Same errors. I think is not a problem about brand....
Guest Memesa Posted December 1, 2009 Report Posted December 1, 2009 (edited) Did you already have Secany´s ROM flashed to it before official upgrade? BTW Can you confirm this is what it looks like afterwards? pda: b7610nxxik2 csc: b7610nxenik2 phone: b7610xxik1 I can indeed confirm that that info is currently listed as my device version! READ THIS! People who have this phone with a brand (like: Vodafone) cannot upgrade! This is due to the fact that Samsung has used a straight-copy from Microsoft itself. If you have Vodafone like me, it would give big trouble updating it like that, it wouldn't have the right information to connect to Vodafone Live etc. So we'll have to wait until Vodafone releases something. (I'm from The Netherlands) I bought my mobile combined with a vodafone subscription (no internet subscription) from a webshop. I know that my phone is not simlocked but I'm unsure if these are linked. Edited December 1, 2009 by Memesa
Guest Sera Posted December 1, 2009 Report Posted December 1, 2009 READ THIS! People who have this phone with a brand (like: Vodafone) cannot upgrade! This is due to the fact that Samsung has used a straight-copy from Microsoft itself. If you have Vodafone like me, it would give big trouble updating it like that, it wouldn't have the right information to connect to Vodafone Live etc. So we'll have to wait until Vodafone releases something. (I'm from The Netherlands) the standard set up is for the business customers of vodafone anyway, they told me at the shop before I even bought the phone that the connection to vodafone live needed to be set up manually. it also says so when you check the settings for the qwerty on the vodafone page, so that can never be the reason why this isn't or shouldn't be working. personally I wouldn't mind setting my connection up again if only I could get that silly update.
Guest mementomori Posted December 1, 2009 Report Posted December 1, 2009 i have the pro from the pdashop. I do have vodafone but i bought the phone seperate..no problems what so ever with the upgrade my previous omnia was vodafone branded but i didnt have any problems flashing.. i know this doesnt help much ;-) but i dont know how the fact that its vodafone branded would interfere with flashing
Guest Sera Posted December 1, 2009 Report Posted December 1, 2009 i have the pro from the pdashop. I do have vodafone but i bought the phone seperate..no problems what so ever with the upgrade my previous omnia was vodafone branded but i didnt have any problems flashing.. i know this doesnt help much ;-) but i dont know how the fact that its vodafone branded would interfere with flashing it does help me believe that vodafone branding on an unbranded phone can't be the issue :D So, happy to hear it! Starting to wonder if it's some kind of ridiculous setting we all have in common hehe
Guest mementomori Posted December 1, 2009 Report Posted December 1, 2009 (edited) I had a vodafone branded. I flashed with i8000 CSC (secany's 6.5) for deleting all brand. Now i tried to flash back to 6.1 (no brand, dumped in this forum) and update with NPS. Same errors. I think is not a problem about brand.... yeah samsung settings ;-) (oeps wrong reply) Edited December 1, 2009 by mementomori
Guest pms Posted December 1, 2009 Report Posted December 1, 2009 It seems in netherlands official wm6.5 upgrade is already available.... http://software.mbzrsolutions.nl/omniaupgrade.html
Guest Sera Posted December 2, 2009 Report Posted December 2, 2009 (edited) I'm still on the original 6.1. I tried the binaryupgrader as well, got to the part where I was able to make a backup, but when it should start to download the rom it seems to fail. Doesn't make any sense. I have also been experimenting with different country settings when installing the software, also no succes... just tried this as well but the updater crashes with a c++ runtime error. in the hope that this is an issue under windows 7 I'll try the same on my XP laptop at work today. EDIT: OK tried this at work now and got the same error, also saw that the update window mentions a DB error :/ Edited December 2, 2009 by Sera
Guest spaanplaat Posted December 2, 2009 Report Posted December 2, 2009 I've updated the phone without problems. No brand, bought this one separate. BTW. I like how the update manual says; Why wait? Stupid Samsung.
Guest Tarqon Posted December 2, 2009 Report Posted December 2, 2009 (edited) Have a look at this thread. It seems for NPS to update the phone we'll need a CSC with the appropriate region code. Edit: In case it wasn't obvious, the above thread is for Omnia 2, do NOT attempt to flash any of the files in that thread. I can indeed confirm that that info is currently listed as my device version! So what's the phone perform like? Worth all this hassle to upgrade? :D Edited December 2, 2009 by Tarqon
Guest roisagi Posted December 2, 2009 Report Posted December 2, 2009 Have a look at this thread. It seems for NPS to update the phone we'll need a CSC with the appropriate region code. Edit: In case it wasn't obvious, the above thread is for Omnia 2, do NOT attempt to flash any of the files in that thread. So what's the phone perform like? Worth all this hassle to upgrade? :D i got confused from all of this: i bout my b7610 seperately - in europe (not NL) where and how can i upgrade to 6.5?
Guest Danji Posted December 2, 2009 Report Posted December 2, 2009 Have a look at this thread. It seems for NPS to update the phone we'll need a CSC with the appropriate region code. Edit: In case it wasn't obvious, the above thread is for Omnia 2, do NOT attempt to flash any of the files in that thread. So what's the phone perform like? Worth all this hassle to upgrade? :( I have flashed my B7610 with i8000 CSC (for delete branding). So, i will update my "omnia II pro qwerty"? ;) Samsung = lol :D
Guest trunks986 Posted December 2, 2009 Report Posted December 2, 2009 Who could dump Wm's 6.5 rom? is it present italian language?
Guest ronald-mcdrive Posted December 2, 2009 Report Posted December 2, 2009 Who could dump Wm's 6.5 rom? is it present italian language? i created a dump of the dutch version: part 1: http://www.megaupload.com/?d=VXP05L7C part 2: http://www.megaupload.com/?d=74Q9W2OV part 3: http://www.megaupload.com/?d=Z005Y5AC part 4: http://www.megaupload.com/?d=KZ6C9Y2K
Guest RelaxedWarrior Posted December 2, 2009 Report Posted December 2, 2009 Thanks for the dump. My device is also not supported for the update according to the NPS (why even build this annoying piece of sh*t software when you have activesync/mobile device center). I have an unbranded unlocked B7610 with Vodafone from GSMwijzer. When I got the phone all settings were in Portugese?? Then CSC check with appropriate region code must be the problem. Thanks Tarqon. Will the dump of the dutch version work with my CSC?
Guest da_mafkeez Posted December 2, 2009 Report Posted December 2, 2009 I have flashed my B7610 with i8000 CSC (for delete branding). So, i will update my "omnia II pro qwerty"? :( Samsung = lol :D did you really flash your b7610 with a CSC of an i8000? without errors or bricks? and what is your experience with flashing the original samsung wm6.5 rom after you have flashed the i8000 CSC?
Guest Tarqon Posted December 2, 2009 Report Posted December 2, 2009 i created a dump of the dutch version: part 1: http://www.megaupload.com/?d=VXP05L7C part 2: http://www.megaupload.com/?d=74Q9W2OV part 3: http://www.megaupload.com/?d=Z005Y5AC part 4: http://www.megaupload.com/?d=KZ6C9Y2K Going to try downloading and flashing this, I'll let you know how it goes. :D
Guest Daidalos117 Posted December 2, 2009 Report Posted December 2, 2009 Is in the dumped 6.5 ROM Czech language?
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now