Jump to content

Omnia I8000 code list

Guest Corpse
 Share

Recommended Posts

Guest Corpse

Guest Corpse

Posted
Posted

Hi all,

I was wondering is there a list for the Omnia I8000 codes.

Like this one: code *#2470# for updating Camera Firmware.

THX.

Guest monyozt

Guest monyozt

Posted
Posted

*#1234# software version

*#9911# batree status percentage

Guest Yohng

Guest Yohng

Posted
Posted

Argh, It seams that Chinese authority block every "MySpace" ... so I cannot reach !

Anyway, codes from i900 works (here a list i've saved in txt file)!

*#06# - Shows IMEI number.

*#1234# - (Executes \Windows\KSReset.exe #Version) Shows the PDA and the Phone version number.

*#2470# - updating  Camera Firmware.

*#1546792*# Admin settings then *#81230*# Préconfiguration

*#0002*28346# Audio settings

*#7465625# - (Executes \Windows\Personalize.exe %LOCK_STATUS_INFO) Shows the status of the Network, Service Provider, SIM or Corporation lock.

*#0228# - (GSM test) Shows the detailed GSM status: Antenna signal power, served network mode, temperature, Battery, Voltage (Antenna ADC test)



*#0206*8376263# - Shows a screen with the PDA/Phone version numbers, H/W and RFCalDate.

*#197328640# - Root debug menu

*#1546792*# - (Executes \Windows\AdminSettings.exe) Shows the Administrator Settings menu. In there:

1. Version - Shows a menu where you can access the version numbers for the PDA and the Software (redirects to the Settings Version applet)

2. Preconfiguration - Password is *#81230*#. Allows to preconfigure the Omnia Operator settings by changing the country and operator. Note: Changing this will hard-reset the device. This won't lock the device with the specified operator.

3. Network-Call Setting:

>1. Power On Attach: (Attach [default] or Detach) ???

>2. Service Domain: (Combined [default], CS or PS) Changes which service domain to use.

>3. Network mode: (Auto [default], GSM or WCDMA) Changes the data connexion mode. WCDMA is 3G.

>4. Network order (Auto [default], GSM first, WCDMA first or No change) Changes which mode to try first when connecting, with Network Mode on Auto.

4. Internal - Password is unknown. I'm not sure what it does.


*#0002*28346# - Opens the Audio control utility, where you can adjust low-level volumes.

*#7465625# - (Executes \Windows\Personalize.exe %LOCK_STATUS_INFO) Shows the status of the Network, Service Provider, SIM or Corporation lock.

*#92782# - (Executes \Windows\uamgr.exe) Shows the UA profile settings.

*#232337# - (Executes \Windows\bthrftest.exe) Shows the Bluetooth RF tester and the device address.

*#32489# - (GSM test) Shows the ciphering status and options to enable or disable it.

*#7451# - (Nothing happens?)

*#7450# - (Nothing happens?)

*#2263# - (Executes \Windows\bandsel.exe -band) (GSM test) Shows the GSM band selection screen, with the options Automatic [default], GSM 850, 900, 1800, 1900, 850/190 and 900/1800.

*#1234# - (Executes \Windows\KSReset.exe #Version) Shows the PDA and the Phone version number.

*#0782# - (Executes \Windows\RTCViewer.exe) Shows the Clock & Alarms settings.

*#0673# - (Executes \Windows\PlaySound.exe) Shows Audio sound tests.

*#9090# - (GSM test) UART/USB settings.

*#0842# - Shows tests for the Vibration, the Back Light and the Alert LED (Power buttton LED).

*#2580# - (GSM test) Integrity settings.

*#0228# - (GSM test) Shows the detailed GSM status: Antenna signal power, served network mode, temperature, Battery, Voltage (Antenna ADC test)

*#2222# - (GSM test) Shows the FTA hardware version.

*#1111# - (GSM test) Shows the FTA software version.

*#0011# - (Executes \Windows\TestMode.exe) (GSM test) Shows some more detailed GSM (Basic Information) status.

*#745# - Dumps SLOG, whatever it is, and shows a message.

*#06# - Shows IMEI number.

*#1*# - (Executes \Windows\Line_KeyTest.exe)

*#0*# - (Executes \Windows\LCDTest.exe) Shows a menu to test LCD colors, bootup melody, vibration, dimming, back camera, front camera, touchscreen, light sensor, sleep mode and mouse. The accelerometer data is also displayed at the bottom.


To goto the admin setting:

*#1546792*#

Password on admin setting:

*#81230*# (if required)


Network band/frequency setting:

*#9999*0#


*#0206*8376263# #FullVersion

#7465625*746* %DIS_LOCK_SIM

*7465625*746* %EN_LOCK_SIM

#7465625*782* %DIS_LOCK_SUB_NW

*7465625*782* %EN_LOCK_SUB_NW

#7465625*638* %DIS_LOCK_NW

*7465625*638* %EN_LOCK_NW

*#0002*28346# \\Windows\\SoundTester.exe

*#197328640# 0×1000

#7465625*27* %DIS_LOCK_CORP

*7465625*27* %EN_LOCK_CORP

#7465625*77* %DIS_LOCK_SVC

*7465625*77* %EN_LOCK_SVC

*#377263867# \\Windows\\DprDump.exe

*2767*3855# #FactoryReset

*#1546792*# \\Windows\\AdminSettings.exe

, code “bj3open” for Internal Control”

*#8377466# \\Windows\\iexplore.exe \\Windows\\VersionID.txt

#1475369# Evt_RILMEMCHKFINISH

*1475369* Evt_RILMEMCHKSTART

*#7465625 \\Windows\\Personalize.exe %LOCK_STATUS_INFO

*#232337# 0×1009 \\Windows\\bthrftest.exe

*#9999*0# 0×0003

*#92782# \\Windows\\uamgr.exe

*958378# \\Windows\\MacViewer.exe -bt

*#32489# 0×1006

*#7451# 0×1006

*#7450# System\\State\\Samsung\\Phone ErrorReport

*#2263# \\Windows\\bandsel.exe -band

*#1234# \\Windows\\KSReset.exe #Version

*#0782# \\Windows\\RTCViewer.exe

*#0673# \\Windows\\PlaySound.exe

*#9090# 0×1013

*#0842# 0x100A

*#2580# 0×1007

*#0228# 0×1005

*#2222# 0×1003

*#1111# 0×1002

*#0011# \\Windows\\TestMode.exe 0×0007

*#745# Evt_RILDUMP

*#06# System\\State\\RIL IsIMEIfromDialparser

*#1*# \\Windows\\Line_KeyTest.exe

*#0*# \\Windows\\LCDTest.exe”


Select GSM Network band:

type in *#9999*0#

Hit (1) to get to the debug screen

Hit left soft ket for “more”

Hit (8) for phone control

Hit (7) for GCF Test Mode

Hit (2) Band Preference

Hit (3) GSM Band Preference

Select number based on your preference and wait several seconds to check the signal. If the signal is too weak, select another band..

  • 3 months later...
Guest tbturker

Guest tbturker

Posted
Posted

Is it possible to crate shortcuts for these codes? It would be great to have a shortcut of the dial code, which you use often.

Guest akusokuzan

Guest akusokuzan

Posted
Posted

does anyone know what the camera fw update password is?

Guest y17dt

Guest y17dt

Posted
Posted
does anyone know what the camera fw update password is?

1234

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share
Go to topic listing
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept