Jump to content

Recommended Posts

Guest thescope
Posted

It seems the battery holds longer but if you use 3G and have 3.5G covrage it will stick to 3G and not change to 3.5G and will result in slower Internet!

I have skype runing 24/7 on my phone sometimes using IM+ and it seems to give me more battery life but Skye is now runing slower.

Takes me longer to load web pages and sync email/weather...

Is there a way I can make the Omnia stick to 3.5G (HSDPA)?

Guest Bruno Adler
Posted

Okay i'll be updating my whole rom topic today with 28232 .

Guest La Traviata
Posted (edited)
Based on my experience, normally I get dynamic readings on top bar, ie 3G, G, H, E when moving from location from another, but with this cab, I only get one static reading (ie 3G) from place to place. But when I browse to Internet then this reading changes into what available on that location. So I think it just stops updating the '3G network condition' from one BTS to another but not the '3G network access'. So it should be OK.

Thank you so much for the clarification. :( Presumably email delivery also works as normal? I don't mind not having HSDPA, but I use internet and email a lot and in one of my main travel destinations (Japan) GSM only phones don't work at all.

Edited by La Traviata
Posted
Thank you so much for the clarification. :( Presumably email delivery also works as normal? I don't mind not having HSDPA, but I use internet and email a lot and in one of my main travel destinations (Japan) GSM only phones don't work at all.

Yes, internet & (pull) email are working normal, just like before installing this cab. No need to set anything to enable them. Last year, I have a trip to Japan (b4 using this cab) and yes, no GSM so I must rely on 3G network (Japan use FOMA, WCDMA & 3G). However since my 3G setting at that time is similar with today and they are working normal with or without this cab, then probably it should be fine too.

Posted
+1 on that!! Already in my 23103 and 21634 roms :( .. Cheers

Hi Nick & Bruno, I definitely will try your ROMs :(

Guest tmichel
Posted

Hello,

Not using i900 for data calls, I am moderated sms/phone user,

mainly using gps in car with phone connected to car lighter.

Only activesync is in running processes and BT turned on.

(even if I kill activesync, it comes back later on, dummy exchange site

tweak to sync to does not prevent it to be reincarnated)

Back from office I charge my i900 till green light.

At a wake up, battery drained of 10% (90% remaining). Great.

Another day, in same condition, it used 65% of battery (35% remaining).

Another one is 50% or 80% ...

Any idea about such a draining behaviour without using phone during night ?

My rom is WM6.5 ROMs by Ryrzy, build JCIC1/28205 "Normal version" using

WM6.1 traditional today layout, phone DXIA2.

Gave also a try to let phone till empty battery and recharding without

turning on phone. No major difference.

In WM6.1, I was at least 3-5 days without need to charge ...

Any idea ?

Th

Guest La Traviata
Posted (edited)
Yes, internet & (pull) email are working normal, just like before installing this cab. No need to set anything to enable them.

Yeah, I installed the .cab and left the phone settings on automatic and everything works as normal. Not sure what the developer was referring to with setting GSM as default. The .cab seems to stop the dynamic network search, but not totally. The signal in my home (of all places) is very unstable and before installing the .cab would constantly fluctuate between 3G, G and E and full signal to no signal at all. With the .cab it still switches between 3G and E from time to time, but not as much. Most of the time it is 3G now.

The only thing I adjusted was background light, which I had set to manual and lowest. The .cab moved it a bit higher than lowest, so I moved it back down.

Edited by La Traviata
Guest tmichel
Posted

All,

You should consider giving your I900's phone rom a look to solve battery drain issues ...

More and more, I am guessing guilty in battery drain issue is not WM65

but more in phone rom's side, continously polling ...

Phone rom DXIA2 is a battery killer. Above .cab allowed me to safe a bit of power but ...

Since I upgraded on last Sunday to XBIC1 (found link in thread "phone.bin - Collection - Free download"

in this forum http://www.modaco.com/content/i900-general...free-download/)

my omnia is reincarnated. Increadible : 15 sec or less to get Sat fix (5-8 sats) and battery life

is back to great : moderate usaage and already 3 days without charging yet !

Phone rom update is just an exe like flashing PDA Rom.

Mine works like a charm with WM6.5 ROMs by Ryrzy, build JCIC1/28205

Happy phone rom update party !

Th

  • 1 month later...
Guest Mariukas
Posted
Hi,

I found this article : http://www.techparaiso.com/3-battery-life-...klight-general/

Then I use the cab supplied there to enhance my P_Dhee 28217 M2D ROM's Omnia, which - after 2 week - I think it's extend my phone battery life almost one day. Cab attached, hope it extend your battery too :P

Edit : Forgot to say thanks to the developer....:( THANKS!

Hi, where does it go after instalation and how to run it, or does it run itself?

Guest bundia
Posted
Hi, where does it go after instalation and how to run it, or does it run itself?

yes, just click the cab and it will install itself in the windows folder

Guest bundia
Posted

seriously this is the best thing that ever happened after windows 6.5 !!!

i had wifi on all day yesterday and it was nearly 40% at 7pm ..

today now at 7pm with wifi all day long it's 80% -also i did some light calls, and it's on for constant email checking-

i dun really know how this thing works but it does !

i will keep on testing and so and tell if i saw more differences

for now !! GO FOR IT !

10/10

Guest bundia
Posted

forgot to add , the device is working always .. it doest get "turn off after 1-2-3 mins" thing .. just on working all the way

and 80% at least that's what's written !! even if 60 ! it would be great

Guest ronaldb3
Posted

Tried to get to the article that has the cab but keep getting 404 error.

Can someone post a link to just the cab.

Thanks,

Ron...

Guest jms2367
Posted
Tried to get to the article that has the cab but keep getting 404 error.

Can someone post a link to just the cab.

Thanks,

Ron...

it's still attached at post # 1, you do not need to go to the link. just click the attached cab to download.

Guest ronaldb3
Posted (edited)
it's still attached at post # 1, you do not need to go to the link. just click the attached cab to download.

Got it. Thanks. I was thinking there was a different version to use at the other location.

Ron...

Edited by ronaldb3
Guest adhip
Posted (edited)
Got it. Thanks. I was thinking there was a different version to use at the other location.

Ron...

Yes, I'm hoping for a newer version with improved/additional registry hacks too. But I guess there's none.

I combine this with WM longlife but seem no further saving (except that we have some control on 2G-3G settings).

Edit : I have to take my statement above back. I'm using a new ROM, installed the wm longlife then the cab, and now after 2 days, I still got 60% battery (previously about 50%), wm longlife indeed give further enhancement, but don't expect an extreme one :P . I'll revise my 1st post.

Edited by adhip

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.