malezRecovery image 0.6.2 + easy installer

[Guest vsg2000]

recovery 0.5 available (see first post) and official site for infos

Sorry @malez, the file is corrupt. Can you upload again? thx!

[Guest malez]

Sorry @malez, the file is corrupt. Can you upload again? thx!

I have checked and the file is correct.

try to redownload it and check that the file you have downloaded is correct with md5sum tool (use malezrecovery_0.5.img.md5 file) and this tool for example http://www.md5summer.org/download.html

You can also try to download it with another browser or after cleaning your brownser cache.

Keep me informed please.

[Guest mirox3m]

I have checked and the file is correct....

Confirmed! Just it installed it without any problems.

[Guest Barleyman]

Daft question.

As far as I understand, zapping this on top of vanilla 1.6 firmware does NOT wipe the phone or apps?

So I could install the recovery image and use either nandroid and/or titanium backup to copy the apps so I don't have to reinstall everything when I change to LCR or some other 2.1 firmware?

[Guest vsg2000]

I have checked and the file is correct.

try to redownload it and check that the file you have downloaded is correct with md5sum tool (use malezrecovery_0.5.img.md5 file) and this tool for example http://www.md5summer.org/download.html

You can also try to download it with another browser or after cleaning your brownser cache.

Keep me informed please.

Sorry, my fault. Everything ok now. ;)

[Guest pipajoja]

installed and working great! thanks =D

just an idea, i dunno if it's possible, but i think it would be cool if there is a function, that we can undo the last flash

instead of restoring the whole system, that would take much less time i suppose? anyway just an idea

[Guest malez]

installed and working great! thanks =D

just an idea, i dunno if it's possible, but i think it would be cool if there is a function, that we can undo the last flash

instead of restoring the whole system, that would take much less time i suppose? anyway just an idea

That would be great but that is Difficult. even if I backup every file replaced by the update, a full partition backup is needed to undo format actions. While I am writing I am thinking that that could be done but will need a lot of development.

Always do a full nandroid backup is the easiest way for the moment (for both of us).

[Guest malez]

Sorry, my fault. Everything ok now. ;)

Good news

[Guest Vincent227]

Hello,

I have a problem how can i run adb reboot bootloader ?? i get this:

C:\Users\irene>cd ..

C:\Users>cd ..

C:\>cd android-sdk_r05-windows\android-sdk-windows

C:\android-sdk_r05-windows\android-sdk-windows>ls

ls wordt niet herkend als een interne

of externe opdracht, programma of batchbestand.

C:\android-sdk_r05-windows\android-sdk-windows>cd tools

C:\android-sdk_r05-windows\android-sdk-windows\tools>adb reboot bootloader

error: device not found

C:\android-sdk_r05-windows\android-sdk-windows\tools>

Hope you can help me?

Thanks,

Vincent

[Guest malez]

Hello,

I have a problem how can i run adb reboot bootloader ?? i get this:

C:\Users\irene>cd ..

C:\Users>cd ..

C:\>cd android-sdk_r05-windows\android-sdk-windows

C:\android-sdk_r05-windows\android-sdk-windows>ls

ls wordt niet herkend als een interne

of externe opdracht, programma of batchbestand.

C:\android-sdk_r05-windows\android-sdk-windows>cd tools

C:\android-sdk_r05-windows\android-sdk-windows\tools>adb reboot bootloader

error: device not found

C:\android-sdk_r05-windows\android-sdk-windows\tools>

Hope you can help me?

Thanks,

Vincent

- Are you sure you have enabled usb debugging in settings / application / Developpment on your phone ?

- Are you sure you have installed Acer Liquid drivers ?

[Guest Vincent227]

Thanks it works now, i forgot to enabled usb debugging ;)

Now i have a other problem i want to move all apps + dalvik + data to SD but i get this error:

Moving: .

Error : Run 'apps2sd on --dalvik --data' via console or Malez menu!

how can i fix this?

Thanks,

Vincent

[Guest malez]

Thanks it works now, i forgot to enabled usb debugging ;)

Now i have a other problem i want to move all apps + dalvik + data to SD but i get this error:

Moving: .

Error : Run 'apps2sd on --dalvik --data' via console or Malez menu!

how can i fix this?

Thanks,

Vincent

You need to create an ext2 parition on your sd card first.

Use the recovery to to do it :

Partition/Repair scard -> Parition sd.

Create at least a 512 Mb parition

All data on you sd will be lost.

[Guest Vincent227]

You need to create an ext2 parition on your sd card first.

Use the recovery to to do it :

Partition/Repair scard -> Parition sd.

Create at least a 512 Mb parition

All data on you sd will be lost.

I have done it, but now my phone dont want to start up ?!! HELP! i get Acer boot and then android en then i get a black screen and the phone does nothing! HELP please!

Thanks,

Vincent

[Guest malez]

I have done it, but now my phone dont want to start up ?!! HELP! i get Acer boot and then android en then i get a black screen and the phone does nothing! HELP please!

Thanks,

Vincent

Maybe Your rom does not support apps2sd. LCR does but original acer one does not.

Reboot in recovery and restore your apps to phone

Edited April 20, 2010 by malez

[Guest Vincent227]

i think my phone is fucktup... i have done this but my phone still give a black screen.. and how can i update my rom to support apps2sd ? how can i fix this???

Edited April 20, 2010 by Vincent227

[Guest Vincent227]

does anyone know how to fix it?

Thanks,

Vincent

[Guest malez]

does anyone know how to fix it?

Thanks,

Vincent

I need more info :

What rom are you using ?

What version of the malez recovery are you using ?

What operation have you made exactly ?

You can try to do a factory reset in the recovery's wipe menu. You will lose all you apps/settings but it will boot.

If you want to change your roms to one that support apps2sd, I advice you to use LCR.

The thread in this forum is here : http://android.modaco.com/content/acer-liq...eeded-08-04-10/

If you are french i can advice you a good site too.

Hope you will fix.

[Guest Borkata]

malez your recovery is doing only moving of applications for apps2sd or installing deamon itself?

I think Vincent is trying to use apps2sd on stock, which is not impossible, but you should have a deamon installed and added to init sequence and also if I remember correctly sdcard (or it was sd) folder in the root ;)

Maybe if you don't install apps2sd deamon you can add an option in your recovery ;)

[Guest Swallow74]

Great job! Now unlock function for Market works like a charm! ;)

[Guest malez]

Great job! Now unlock function for Market works like a charm! ;)

Thank you.

Update to 0.5.2. There was a bug in flash update file (fail when format needed by update script)

Edited April 21, 2010 by malez

[Guest Vincent227]

I need more info :

What rom are you using ?

What version of the malez recovery are you using ?

What operation have you made exactly ?

You can try to do a factory reset in the recovery's wipe menu. You will lose all you apps/settings but it will boot.

If you want to change your roms to one that support apps2sd, I advice you to use LCR.

The thread in this forum is here : http://android.modaco.com/content/acer-liq...eeded-08-04-10/

If you are french i can advice you a good site too.

Hope you will fix.

Hello,

- I have a standard rom ( i just got the acer liquid S100 new )

- I used version 0.5 of malez recovery

- I made a partion on the SD and then apps + dalvik + data to SD

And the link that you gave me for rom is that also in dutch ?

Thanks,

Vincent

[Guest malez]

Hello,

- I have a standard rom ( i just got the acer liquid S100 new )

- I used version 0.5 of malez recovery

- I made a partion on the SD and then apps + dalvik + data to SD

And the link that you gave me for rom is that also in dutch ?

Thanks,

Vincent

- Standard rom does not support apps2sd (I have not finished to write my boot image for standard rom)

- You must update malez recovery to 0.5.2 to be uptodate

- Your parition is prepared but your rom does not support it. Move everything back to phone

LCR rom supports dutch and has dutch keyboard with T9 mode (HTC IME).

[Guest Vincent227]

- Standard rom does not support apps2sd (I have not finished to write my boot image for standard rom)

- You must update malez recovery to 0.5.2 to be uptodate

- Your parition is prepared but your rom does not support it. Move everything back to phone

LCR rom supports dutch and has dutch keyboard with T9 mode (HTC IME).

Everything is back on the phone i think.. by Apps/Dalvik/Cache current status it says that everything is stored on the phone. I think the best option is to wipe data/factory reset ??

Thanks,

Vincent

[Guest Vincent227]

Is wipe data/factory the best option ?? yes/no

[Guest malez]

Is wipe data/factory the best option ?? yes/no

Yes