Guest YuA Posted March 7, 2010 Report Posted March 7, 2010 Hello, my omnia 2 is brick, it will not start or do anything. Anyway, I was about to flash it with 2.14 with the Rom Octans JB3 and after a few seconds I have since had the wrong charged Eboot and mobile screen has started to green: (. I've disconnected and no longer answered the phone. I flashed the phone several times and never had given me problems. Any solution?: ( Sorry for english I use google traductor <_<
Guest navin-shetty Posted March 7, 2010 Report Posted March 7, 2010 Opps sorry for you, have you tried to hard reset your device??, if not try it once hope it will reset to factory settings. To Hard Reset: 1. Turn OFF the phone (I know you canot start it) 2. Press VolumeUp and Lock buttons (do not release); 3. Press Call/Green and then HangUp/Red (do not release all buttons); 4. Phone should Vibrate and turn on; 5. Count to 3 and release all buttons; You will have a choice to FORMAT or CANCEL the operation. Click FOTMAT to FORMAT IT FULLY TO FACTORY SETTINGS. You canot do master reset by entering number like this: *2767*3855# Good luck!
Guest YuA Posted March 7, 2010 Report Posted March 7, 2010 Opps sorry for you, have you tried to hard reset your device??, if not try it once hope it will reset to factory settings. To Hard Reset: 1. Turn OFF the phone (I know you canot start it) 2. Press VolumeUp and Lock buttons (do not release); 3. Press Call/Green and then HangUp/Red (do not release all buttons); 4. Phone should Vibrate and turn on; 5. Count to 3 and release all buttons; You will have a choice to FORMAT or CANCEL the operation. Click FOTMAT to FORMAT IT FULLY TO FACTORY SETTINGS. You canot do master reset by entering number like this: *2767*3855# Good luck! I try it, but nothing... <_<
Guest Lancez Posted March 7, 2010 Report Posted March 7, 2010 r u able to turn ur phone on, even the samsung logo?
Guest YuA Posted March 7, 2010 Report Posted March 7, 2010 r u able to turn ur phone on, even the samsung logo? No, when i press the ON button, nothing happens <_<
Guest Lancez Posted March 7, 2010 Report Posted March 7, 2010 No, when i press the ON button, nothing happens <_< is ur phone able to charge from wall charger? did u see anything on the screen?
Guest YuA Posted March 7, 2010 Report Posted March 7, 2010 is ur phone able to charge from wall charger? did u see anything on the screen? No, and when I connect to the PC does not recognize me the phone
Guest Lancez Posted March 7, 2010 Report Posted March 7, 2010 No, and when I connect to the PC does not recognize me the phone what dose the screen look like b4 it went dead
Guest YuA Posted March 7, 2010 Report Posted March 7, 2010 the screen took a greenish tint and started to leave many black lines
Guest Lancez Posted March 7, 2010 Report Posted March 7, 2010 the screen took a greenish tint and started to leave many black lines that dosent sound good at all. u might wanna take it to service center in Spain or maybe someone else can help u on that. good luck
Guest cumonifyoucan Posted March 7, 2010 Report Posted March 7, 2010 Use a rom that previously worked for you and configure it in Octans. Click on Detect and then connect your cable to the phone and then click on Start Downloading it should start working. If this does not work take out the battery and put it in again and try the step above. All the best.
Guest Pete B Posted March 7, 2010 Report Posted March 7, 2010 FYI. Same happened to my phone. Almost exactly the same down to the lines on the screen. Turns out it is completely bricked. The usb cable isn't going to do anything because it can't load the bootloader. And hard reset did nothing. Found out when the files were uncompressed all of them were 0kB but had the correct file names. So my phone was essentially flashed blank. So my phone is in for repair. Hope they can update it via jtag. One shop had no idea and kept the phone for a week to say they couldn't do it even after I explained all the symptons. They claim they couldn't get the software for the phone even though I supplied the files to flash. Guess they didn't have jtag hardware. Samsung Australia said they can't do it becuase my phone was bought overseas. I'm sure this is because thye don't like poeple importing phones and bypassing them even if you bought it yourself from overseas and are willing to pay for the repair. NOt sure if Samsung worldwide don't fix imported phones.
Guest jebise Posted March 7, 2010 Report Posted March 7, 2010 See this is scares me and thus why i don't want to flash the eboot, but really want that extra 5MB of RAM. PLus the fact i have a i8000L and the eboot is 18000, but people have done it it makes me want to try. But then i see this thread.
Guest Lancez Posted March 7, 2010 Report Posted March 7, 2010 See this is scares me and thus why i don't want to flash the eboot, but really want that extra 5MB of RAM. PLus the fact i have a i8000L and the eboot is 18000, but people have done it it makes me want to try. But then i see this thread. its not that scary, i always flash eboot and phone.bin whenever i upgrade ROMs. just make sure that u reboot ur PC b4 flashing.
Guest jebise Posted March 7, 2010 Report Posted March 7, 2010 its not that scary, i always flash eboot and phone.bin whenever i upgrade ROMs. just make sure that u reboot ur PC b4 flashing. nah i don't trust these xp drivers i'm using on my win 7 PC. Every time i reboot i have to reinstall the drivers or OCTANS throws a bunch of errors, sadly i have no more xp machines <_<
Guest Lancez Posted March 7, 2010 Report Posted March 7, 2010 nah i don't trust these xp drivers i'm using on my win 7 PC. Every time i reboot i have to reinstall the drivers or OCTANS throws a bunch of errors, sadly i have no more xp machines <_< win7 x64? ya, they r pain in the A**. lol P.S. look for my new post about win7 x64 driver
Guest PCSPhone Posted March 7, 2010 Report Posted March 7, 2010 The same thing happen to me while trying to flash eboot + PDA. Samsung Service Center had to replace the mainboard. My problem was related to XP driver on my laptop. I then flash my phone using my XP desktop and it worked. To be safe I flashed PDA first to make sure it was OK then flash eboot + PDA and now I have my extra 5mb.
Guest jebise Posted March 7, 2010 Report Posted March 7, 2010 win7 x64? ya, they r pain in the A**. lol P.S. look for my new post about win7 x64 driver actually 32bit doing it on my laptop because of certificates etc, but oddly i have to install the drivers each time, maybe you have better win 7 32bit driver or i'm using some old ones i dunno.
Guest Lancez Posted March 7, 2010 Report Posted March 7, 2010 actually 32bit doing it on my laptop because of certificates etc, but oddly i have to install the drivers each time, maybe you have better win 7 32bit driver or i'm using some old ones i dunno. ok, i'll upload x86 driver too.
Guest jebise Posted March 8, 2010 Report Posted March 8, 2010 great i see you added them now, can you confirm they work?
Guest Lancez Posted March 8, 2010 Report Posted March 8, 2010 great i see you added them now, can you confirm they work? i cant coz i dont use win 7, XP only <_<. but if u go to original thread in kingmobile, u'll see 100% positive reports. use google tool bar if u dont understand chinese. i'm pretty sure they works.
Guest navin-shetty Posted March 8, 2010 Report Posted March 8, 2010 'cmon guys....help him instead showing what OS you have.... <_<
Guest navin-shetty Posted March 8, 2010 Report Posted March 8, 2010 'cmon guys....help him instead showing what OS you have.... <_<
Guest Lancez Posted March 8, 2010 Report Posted March 8, 2010 'cmon guys....help him instead showing what OS you have.... <_< i already gave him/her my advise. there is nothing we can do but taking to service center.
Guest dagb Posted March 8, 2010 Report Posted March 8, 2010 That sucks - others may pay attention to the error that was made - make sure you have good source files (verify size etc.) As for os, i have used win 7 x86 and 64 - just follow the directions posted in the forum - and you should be ok. Happy flashing!
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now