Windows Phone 7 build 7.0.0.6077

[Guest ronalgps]

hey what about this dump where you can find

oem

sys

xip

do you think to omnia 2 community can get something our lil one

http://forum.xda-developers.com/showthread...googtrans/it/en

Edited March 16, 2010 by ronalgps

[Guest Ganhiru]

I heard about this rom dump, Id like to see a WM7 omnia rom to. BUT :) This one is no good. Its x86 based and the O2 cpu is Arm7 based ( correct me if I'm wrong ).

In anny case the Instruction set is Not compilable.

Still I don't think that we will see usable roms with WM7 for the O2, this is because of the fact that WM7 will only support 1 resolution and a Captive Touch screen, wil not have multitasking, requires 512MB of ram and a faster CPU.

It might work, but I doubt if it will be usable. ( Sill I do Hope it will be )

[Guest NewForce]

WM7 Chassis 1 Specification :

Core requirements:

Processor : ARM v6+, L2 Cache, VFP, Open GL ES 2.0 graphic

Memory : 256MB+ DRAM, 1G+ Flash (at least 512MB fast flash)

Display : WVGA (800×480) or FWVGA (854×480) on 3.5” and above screen.

Touch : Support Multi-touch.

Peripherals:

Camera : 3MP+, flash optional, 2nd VGA front camera optional

GPS : aGPS required

Sensors required: Light Sensor, Compass (3 axis, 5 degrees, 100 Hz sample rate), Accelerometer (3 axis, 2mg resolution, 100 Hz sample rate)

USB : Support USB2.0 Full speed.

BlueTooth : 2.1 on MSFT BT stack, CSR BlueCore6 BT stack later.

Wi-Fi : 802.11B/G required, MSFT Native Wi-Fi stack.

Battery Charging : Micro USB

Audio output : 3.5mm.

OMNIA-2 passes all the requiremernts.

[Guest zula]

Still I don't think that we will see usable roms with WM7 for the O2, this is because of the fact that WM7 will only support 1 resolution and a Captive Touch screen, wil not have multitasking, requires 512MB of ram and a faster CPU.

I Agree with you, but the requirements says only 256mb Ram (no real multitasking) and 8gb wich we have.

But I think that our processor and our 3d hardware performance won't handle windows phone 7.

And considering the news i'm hearing about winphone 7, I think I'll stay with my o2 for some months and I would go for and android device... what a pity... after so many years with winmo...

[Guest NewForce]

But I think that our processor and our 3d hardware performance won't handle windows phone 7.

WM7 Processor req : ARM v6+, L2 Cache, VFP, Open GL ES 2.0 graphic

Fyi, ARM 6+ cpu speed last known speed max at 665Mhz.

Omnia2 S3C6410 CPU running @ 815Mhz with hard-wired 3D GFX accelerator and OpenGL ES 2.0 support.

[Guest Swampie]

WM7 Chassis 1 Specification :

Core requirements:

Processor : ARM v6+, L2 Cache, VFP, Open GL ES 2.0 graphic

Memory : 256MB+ DRAM, 1G+ Flash (at least 512MB fast flash)

Display : WVGA (800×480) or FWVGA (854×480) on 3.5” and above screen.

Touch : Support Multi-touch.

Peripherals:

Camera : 3MP+, flash optional, 2nd VGA front camera optional

GPS : aGPS required

Sensors required: Light Sensor, Compass (3 axis, 5 degrees, 100 Hz sample rate), Accelerometer (3 axis, 2mg resolution, 100 Hz sample rate)

USB : Support USB2.0 Full speed.

BlueTooth : 2.1 on MSFT BT stack, CSR BlueCore6 BT stack later.

Wi-Fi : 802.11B/G required, MSFT Native Wi-Fi stack.

Battery Charging : Micro USB

Audio output : 3.5mm.

OMNIA-2 passes all the requiremernts.

Where did you get those details? I say this because the display resolution requirements are wrong. It's WVGA or HVGA only (HVGA not supported at launch). Also camera must be 5MP+.

Finally, capacitive touchscreen capable of 4 points of multi-touch is required. Omnia II has a resistive screen and no multi-touch (I believe).

[Guest NewForce]

Where did you get those details? I say this because the display resolution requirements are wrong. It's WVGA or HVGA only (HVGA not supported at launch). Also camera must be 5MP+.

Finally, capacitive touchscreen capable of 4 points of multi-touch is required. Omnia II has a resistive screen and no multi-touch (I believe).

Too many websites reported this, I've lost count which one.

No, the display resolution and camera requirement definitely not wrong for Chassis 1 spec.

There will be other Chassis but no spec about them now.

Think Microsoft purposely having this spec directly targeting to iPhone 3GS spec.

[Guest 206bw]

Omnia2 does not support multi touch

WM7 Chassis 1 Specification :

Core requirements:

Processor : ARM v6+, L2 Cache, VFP, Open GL ES 2.0 graphic

Memory : 256MB+ DRAM, 1G+ Flash (at least 512MB fast flash)

Display : WVGA (800×480) or FWVGA (854×480) on 3.5” and above screen.

Touch : Support Multi-touch.

Peripherals:

Camera : 3MP+, flash optional, 2nd VGA front camera optional

GPS : aGPS required

Sensors required: Light Sensor, Compass (3 axis, 5 degrees, 100 Hz sample rate), Accelerometer (3 axis, 2mg resolution, 100 Hz sample rate)

USB : Support USB2.0 Full speed.

BlueTooth : 2.1 on MSFT BT stack, CSR BlueCore6 BT stack later.

Wi-Fi : 802.11B/G required, MSFT Native Wi-Fi stack.

Battery Charging : Micro USB

Audio output : 3.5mm.

OMNIA-2 passes all the requiremernts.

[Guest GanjaShelter]

Omnia2 does not support multi touch

have heard there is a software-solution for this problem.

anybody heard about this?

k.r.

@.@Ganja@.@

[Guest cicciosprint]

have heard there is a software-solution for this problem.

anybody heard about this?

k.r.

@.@Ganja@.@

Software won't do any good.

Anyway, apart from the fact that WPS7 is utter crap for me, that's a mere emulator image, and even then a rather crappy one since nothing is there but an IE link. Nothing to sweat upon, guys.... wait and we will see.

I think WPS7 is just a marketing stunt... come on, it even lacks copypaste! Looks like they did indeed copy something... the forst iPhone. Bleargh.