Jump to content

Issues with USB connectivity etc. and root / A2SD


Recommended Posts

Guest Biliskner
Posted
GSM Handset or Network supplied?

I was the same, although about 10 mins after the rooting guide was released, then waited about for A2SD :)

Import ;) Otherwise I'd return it already! :D

So yeah, generic unbranded.

Guest vastloper
Posted

Ok

i typed in a terminal the following command:

stop adbd

this disconnected adb and showed an unknown device in my device manager.

I think you can enable it by typing in a terminal on phone with:

start adbd

will try this when back again.

when the command is not working we need to start the service for adbd i think

Guest Biliskner
Posted
Ok

i typed in a terminal the following command:

stop adbd

this disconnected adb and showed an unknown device in my device manager.

I think you can enable it by typing in a terminal on phone with:

start adbd

will try this when back again.

when the command is not working we need to start the service for adbd i think

vastloper, do you have a bricked usb port? i assume you can term on your phone because it's rooted? (testruu?). currently i only have stock ROM, so ls, su are all "permission denied" :)

Guest vastloper
Posted
vastloper, do you have a bricked usb port? i assume you can term on your phone because it's rooted? (testruu?). currently i only have stock ROM, so ls, su are all "permission denied" :)

people who still have root can try and see what happens with:

start adbd

Guest ZiCoN
Posted

C:\ADB\tools>fastboot oem boot

... INFOsetup_tag addr=0xA0000100 cmdline add=0x8E07D98C

INFOTAG:Ramdisk OK

INFOTAG:smi ok, size = 0

INFOTAG:hwid 0x0

INFOTAG:skuid 0x21F04

INFOTAG:hero panel = 0x0 Why does this say "hero" ??

INFOTAG:engineerid = 0x0

INFOMCP dual-die

INFOMCP dual-die

INFOTAG:mono-die = 0x0

INFODevice CID is not super CID

INFOCID is HTC__Y13

INFOsetting->cid::HTC__Y13

INFOserial number: HT03TPL04355

INFOcommandline from head: no_console_suspend=1

INFOcommand line length =421

INFOactive commandline: board_bravo.disable_uart3=1 board_bravo.

INFOusb_h2w_sw=1 board_bravo.disable_sdcard=0 diag.enabled=0 boa

INFOrd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e

INFOmmc=false androidboot.baseband=4.05.00.11 androidboot.cid=H

INFOTC__Y13 androidboot.carrier=HTC-Nor androidboot.mid=PB992000

INFO0 androidboot.keycaps=qwerty androidboot.mode=normal android

INFOboot.serialno=HTxxxxxxxxxx androidboot.bootloader=0.75.0000

INFOno_console_suspend=1

INFOaARM_Partion[0].name=misc

INFOaARM_Partion[1].name=recovery

INFOaARM_Partion[2].name=boot

INFOaARM_Partion[3].name=system

INFOaARM_Partion[4].name=cache

INFOaARM_Partion[5].name=userdata

INFOpartition number=6

INFOValid partition num=6

INFOmpu_nand_acpu_rw A1E 1000

INFOjump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker

INFOnel_addr(0x20008000)

INFO-------------------hboot boot time:205130 msec

FAILED (status read failed (Too many links))

Guest jeckyllhavok
Posted

"people who still have root can try and see what happens with:

start adbd "

nothing happens for me

Guest jeckyllhavok
Posted

Ok, i think to organize thee things better we should update our signature with theese infos:

Usb totally bricked except fastboot

usb bricked in recovery

fully functional

so that people can direct talk to thoose they need infos from

Guest vastloper
Posted
Here, theese are my files from my usb bricked desire:

http://rapidshare.com/files/387611171/Jeck...kedusbfiles.rar

contains:

boot.img

recovery.img

misc.img

made it with connect bot om the device

hmm

i have adb working

i have release keys

you have test keys

in recovery

in the default.prop file

my ro.secure is set to 1

yours is set to 0

my ro.debugable is set to 1

yours is 0

now how are we going to change those value's ?

Guest Biliskner
Posted
hmm

i have adb working

i have release keys

you have test keys

in recovery

in the default.prop file

my ro.secure is set to 1

yours is set to 0

my ro.debugable is set to 1

yours is 0

now how are we going to change those value's ?

unlock my SPL :)

Guest BOlle_NL
Posted
hmm

i have adb working

i have release keys

you have test keys

in recovery

in the default.prop file

my ro.secure is set to 1

yours is set to 0

my ro.debugable is set to 1

yours is 0

now how are we going to change those value's ?

Maybe you could add them to /data/local.prop and rebootie. See http://blog.chinaunix.net/u2/85805/showart_1421739.html for a -h explanation.

Guest Biliskner
Posted

hey guys, something really random - if your battery is being sucked 3x faster than before your usb-brick, try this

http://www.technipages.com/htc-hero-start-in-safe-mode.html

I know it says Hero, but it works on Desire too.

My battery lasts forever now. 14+ hours and 73% left. Stoked :)

Last 7 hours was WiFi enabled in background, Gmail checks every hour etc.

I have a feeling 3G data will still suck the life out of it, but from memory it did that anyway the first week I had this phone (before rootedupdate.zip)

Guest eViL D:
Posted

So, I plugged my phone in this morning to my PC. And, I hear the USB sound. USBDeview shows it connected, but as a usb composite device. I decided to unplug it and plug it back in, but nothing happened. Then, I unplugged it, uninstalled it and the Qualcomm drivers and rebooted it. After a few minutes I plugged it back in and it installed the composite device drivers again. Still no adb though and charging takes a few minutes to kick in. Never noticed this though.

Guest ZiCoN
Posted
hey guys, something really random - if your battery is being sucked 3x faster than before your usb-brick, try this

http://www.technipages.com/htc-hero-start-in-safe-mode.html

I know it says Hero, but it works on Desire too.

My battery lasts forever now. 14+ hours and 73% left. Stoked :)

Last 7 hours was WiFi enabled in background, Gmail checks every hour etc.

I have a feeling 3G data will still suck the life out of it, but from memory it did that anyway the first week I had this phone (before rootedupdate.zip)

Mine starts up... almost loads the sense, then it reboots the sense...

Guest staba
Posted

Man I hope you guys get a fix soon. Currently my device is fine but I don't want to poop my pants everytime I flash a rom in the future :).

Guest Biliskner
Posted
So, I plugged my phone in this morning to my PC. And, I hear the USB sound. USBDeview shows it connected, but as a usb composite device. I decided to unplug it and plug it back in, but nothing happened. Then, I unplugged it, uninstalled it and the Qualcomm drivers and rebooted it. After a few minutes I plugged it back in and it installed the composite device drivers again. Still no adb though and charging takes a few minutes to kick in. Never noticed this though.

The drivers I found for WinXP installed "Qualcomm Modem". The company is like fort knox, can't find anything on it/them. Using Windows (on my Win7 machine) "look for recommended drivers automatically" yield absolutely nothing....

If your phone is turned off charging will start immediately, if your phone is turned on, it's like as if the kernel is waiting for some sort of USB input (my guess is it's waiting for Qualcomm software to take a hold of it).

Guest Biliskner
Posted
Man I hope you guys get a fix soon. Currently my device is fine but I don't want to poop my pants everytime I flash a rom in the future ;).

LOL :)

Guest Biliskner
Posted
Mine starts up... almost loads the sense, then it reboots the sense...

Could be trying to load some widgets... mine loaded no probs and most widgets were broken. Then I turned it off like normal and turned it on like normal and now I'm in shock it's still at 70%, at this rate I could charge it every 3 days :)

Guest ZiCoN
Posted
Could be trying to load some widgets... mine loaded no probs and most widgets were broken. Then I turned it off like normal and turned it on like normal and now I'm in shock it's still at 70%, at this rate I could charge it every 3 days :)

Well... I'm hoping it have done something... anything to the battery drainage. It does say "safe mode", but it reboots Sense before I can do much..

Guest stevebrush
Posted
Yep, I rooted about 12 hours after Paul announced his r1 rooting method (with r1 a2sd)

Do this too, r1 méthod, a few hours after release, then... see my previous posts.

Guest jdouce
Posted (edited)

i have adb available in android but when i connect the usb i dont get the Charge, Disk Drive, Internet Sharing, HTC Sync options

if i boot into fastboot i can get into recovery and usb-ms works

i can push files via adb whilst in android

but the phone/pc have no recognition of the connection except the connection of adb

only ever used r4 method

Edited by jdouce
Guest scotch whisky
Posted (edited)

As anyone tried the codes shown here to try to fix the phone? Service Mode codes?

Edited by scotch whisky
Guest vastloper
Posted

ok

im trying to find a way to acces the recovery menu without adb

when phone boots in recovery it is looking for /cache/recovery/command

i am trying to find a way to copy the recovery files from for example /data/local/files

or any other writable area

any help would be welcome on how to do that without /system/bin/sh

everytime the phone boots in recovery it is looking for that file and after reboot its deleted again so the command file needs to be placed there again for a new recovery

greetings from a vastloper

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.