Guest Deffe Posted July 7, 2010 Report Posted July 7, 2010 (edited) I tried that before but it didn't work! i know how access to my sd card o yeah!!!!! ty soo much!!!!! xda!!!!!!! but is there away i can do the below without a rooted htc legend: Open a terminal emulator(I used ConnectBot) and type su cat /sdcard/flash_image > /data/flash_image cat /sdcard/mtd0.img > /data/mtd0.img chmod 755 /data/flash_image or chmod u+x /data/flash_image /data/flash_image misc /data/mtd0.img reboot DONE! THANK YOU VERY MUCH!!!! P.S. before i have reroot my legend make step1 and use fake-flush and not step2. So the phone became rooted and i can use connectbot! ----- Last question: Now usb seems ok and the PC can read the phone like a external storage, but i have error with HTC sync. How can i do? thank you Edited July 8, 2010 by Deffe
Guest smartsreenath Posted July 29, 2010 Report Posted July 29, 2010 I tried that before but it didn't work! i know how access to my sd card o yeah!!!!! ty soo much!!!!! xda!!!!!!! but is there away i can do the below without a rooted htc legend: Open a terminal emulator(I used ConnectBot) and type su cat /sdcard/flash_image > /data/flash_image cat /sdcard/mtd0.img > /data/mtd0.img chmod 755 /data/flash_image or chmod u+x /data/flash_image /data/flash_image misc /data/mtd0.img reboot DONE! THANK YOU VERY MUCH!!!! P.S. before i have reroot my legend make step1 and use fake-flush and not step2. So the phone became rooted and i can use connectbot! ----- Last question: Now usb seems ok and the PC can read the phone like a external storage, but i have error with HTC sync. How can i do? thank you same problem ..........some one help me............
Guest kubensis Posted July 29, 2010 Report Posted July 29, 2010 when i digit on connectbot cd /sdcard/flash_image > /data/flash_image appairs : cannot create /data/flash_image : permission denied I get exactly the same problem, i have tried numerous times now and always get "permission denied" when entering the line; cat /sdcard/flash_image > /data/flash_image or cat /sdcard/mtd0.img > /data/mtd0.img I have also tried these first still to no avail; chmod u+x /data/flash_image and chmod 755 /data/flash_image i am using connect bot on the legend to send these commands, is this the correct way of doing it? I have also noticed that although my SD card is readable in a card reader on my laptop and seems to function fine the legend doesnt seem to be saving anything to it ( phone memory keeps filling up!). Although when i go to the SD card settings on the phone it gives me the option to unmount and even shows me the size of the card (7.42GB). Absolutely any advice on how to make my phone work again would be greatly appreciated, i have spent hours and hours going round in circles! Thanks!
Guest smartsreenath Posted July 30, 2010 Report Posted July 30, 2010 in the disire section it is asked to mpost the "fastboot oem boot" log if the flash fails here it is: ~/htclegend/ANDROID/r4-legend-root$ ./fastboot-linux oem boot ... INFOsetup_tag addr=0x60000100 cmdline add=0x9D078D14 INFOTAG:Ramdisk OK INFOTAG:smi ok, size = 0 INFOTAG:hwid 0x0 INFOTAG:skuid 0x22F00 INFOTAG:hero panel = 0x0 INFOTAG:engineerid = 0x0 INFOMCP dual-die INFOMCP dual-die INFOTAG:mono-die = 0x0 INFODevice CID is not super CID INFOCID is HTC__E11 INFOsetting->cid::HTC__E11 INFOserial number: HT039NX00037 INFOcommandline from head: no_console_suspend=1 console=null INFOcommand line length =441 INFOactive commandline: board_legend.disable_uart3=1 board_legen INFOd.usb_h2w_sw=1 board_legend.disable_sdcard=0 diag.enabled=0 INFOboard_legend.debug_uart=0 smisize=0 userdata_sel=0 androidbo INFOot.emmc=false androidboot.baseband=7.05.35.26L androidboot. INFOcid=HTC__E11 androidboot.carrier=HTC-Dutch androidboot.mid=P INFOB7610000 androidboot.keycaps=qwerty androidboot.mode=normal INFOandroidboot.serialno=HT039NX00037 androidboot.bootloader=0.4 INFO3.0001 no_console_suspend=1 console=null INFOaARM_Partion[0].name=misc INFOaARM_Partion[1].name=recovery INFOaARM_Partion[2].name=boot INFOaARM_Partion[3].name=system INFOaARM_Partion[4].name=cache INFOaARM_Partion[5].name=userdata INFOpartition number=6 INFOValid partition num=6 INFOmpu_nand_acpu_rw 8F2 1000 FAILED (status read failed (Protocol error)) if someone has an idear why I get the segmentation fault please tell thanks same problem help me.......
Guest kubensis Posted July 30, 2010 Report Posted July 30, 2010 Just a quick something to add, in Astro File Manager when the card is not visible Astro also cannot access it and it has "d--" next to "sdcard". When the card is visible Astro has "drw" next to "sdcard" i would imagine this is the difference between write protected and re-writable, just hope this is useful to someone aiming to fix this problem (like me!). Also the card seems to drift inbetween being seen and not being seen intermittently.
Guest borgfather Posted August 4, 2010 Report Posted August 4, 2010 Just a quick something to add, in Astro File Manager when the card is not visible Astro also cannot access it and it has "d--" next to "sdcard". When the card is visible Astro has "drw" next to "sdcard" i would imagine this is the difference between write protected and re-writable, just hope this is useful to someone aiming to fix this problem (like me!). Also the card seems to drift inbetween being seen and not being seen intermittently. i doubt it is a question of write protection in unix-like operating systems you have a mount-point , this is nothing more than a folder on the systems OS-partition whare the other partition will be mounted so what your seeing is the mount point a folder/directory on the protected system folder, the sd card is not recognized and therefore not mounted
Guest ilos Posted August 8, 2010 Report Posted August 8, 2010 (edited) here my mtd0.img ( vodaphone France powered :)) ( for info : unbrick was done on a 2.03.405.3 stock rom and it's why i had push 2.03.405.3 version in my mtd0.img ) INFOCID is VODAP203 INFOsetting->cid::VODAP203 mtd0.img Edited August 9, 2010 by ilos
Guest smartsreenath Posted August 9, 2010 Report Posted August 9, 2010 Can anyone post a step by step guide for mac? I am still having trouble getting this to work. Thanx ok. Here is the fix i used, step by step. works every time. if your phone can't even see the memory card, enable first with: fastboot oem enableqxdm 0 Do the above step in Recovery mode. Once the memory card is visible, transfer the files "flash_image" and "mtd0.img" to the memory card howevor is possible. Restart the phone, and install connectbot from the market. Open connectbot, and through terminal (local) issue the following commands: su cat /sdcard/flash_image > /data/flash_image "then press enter" cat /sdcard/mtd0.img > /data/mtd0.img "then press enter" chmod 755 /data/flash_image "then press enter" /data/flash_image misc /data/mtd0.img "then press enter" It will give you an error, on the last command, but ignore it and restart the phone It should be fixed. fastboot oem enableqxdm 0 ..........how can i do it in recovery mode........could any one explain it for me........
Guest smartsreenath Posted August 10, 2010 Report Posted August 10, 2010 fastboot oem enableqxdm 0 ..........how can i do it in recovery mode........could any one explain it for me........ sorry my mistake actually its not in recovery mode ...its in fastbootmode......... :) :D :D :P :P
Guest kubensis Posted August 15, 2010 Report Posted August 15, 2010 Okay i sorted my phone! I now have "disk drive" access on my PC hopefully meaning i can flash a new ROM (Not tried yet). To confirm this alllows access to your SD card via the PC, i had made a VERY simple mistake; When using connectbot i had only typed "su" once, this gave me a dollar symbol For this to work you need to type "su" twice, the first gives the dollar symbol ($) the second gives the hash symbol (#) Once you have the # symbol in connect bot you can begin typing this; cat /sdcard/flash_image > /data/flash_image "then press enter" cat /sdcard/mtd0.img > /data/mtd0.img "then press enter" chmod 755 /data/flash_image "then press enter" /data/flash_image misc /data/mtd0.img "then press enter" reboot phone 2 things .... 1) Make sure you have done the fast boot step: turn off phone and press vol up and power together, then enter fastboot, then type: fastboot oem enableqxdm 0 2) make sure "mtd0.img" and "flash_image" are on the root of your sd card and named exactly as "mtd0.img" and "flash_image", i had a space after one of my files stopping it from working, i hope this solves everyones issues!! Gonna try to flash my phone now!
Guest izya12 Posted August 16, 2010 Report Posted August 16, 2010 Hi all People that I do?? I can not determine the USB, only in boot mode is determined, I have a new hboot and I can not do step1, can someone help me ka?? Poligon:/mnt/winda/tmp/android/r4-legend-root# ./fastboot-linux oem gencheckpt boot ... INFOsetup_tag addr=0x60000100 cmdline add=0x9D079570 INFOTAG:Ramdisk OK INFOTAG:smi ok, size = 0 INFOTAG:hwid 0x0 INFOTAG:skuid 0x22F00 INFOTAG:hero panel = 0x0 INFOTAG:engineerid = 0x0 INFOMCP dual-die INFOMCP dual-die INFOTAG:mono-die = 0x0 INFODevice CID is not super CID INFOCID is HTC__A07 INFOsetting->cid::HTC__A07 INFOserial number: HT03DNX01548 INFOcommandline from head: no_console_suspend=1 console=null INFOcommand line length =443 INFOactive commandline: board_legend.disable_uart3=1 board_legen INFOd.usb_h2w_sw=1 board_legend.disable_sdcard=0 diag.enabled=0 INFOboard_legend.debug_uart=0 smisize=0 userdata_sel=0 androidbo INFOot.emmc=false androidboot.baseband=7.08.35.21 androidboot.c INFOid=HTC__A07 androidboot.carrier=HTC-Russia androidboot.mid=P INFOB7610000 androidboot.keycaps=qwerty androidboot.mode=recover INFOy androidboot.serialno=HT03DNX01548 androidboot.bootloader=0 INFO.43.0003 no_console_suspend=1 console=null INFOaARM_Partion[0].name=misc INFOaARM_Partion[1].name=recovery INFOaARM_Partion[2].name=boot INFOaARM_Partion[3].name=system INFOaARM_Partion[4].name=cache INFOaARM_Partion[5].name=userdata INFOpartition number=6 INFOValid partition num=6 INFOmpu_nand_acpu_rw 15E 1000 FAILED (status read failed (Protocol error))
Guest izya12 Posted August 17, 2010 Report Posted August 17, 2010 (edited) http://knol.google.com/k/dmitrii-ikonnikov...tyiexg/1?embed# Edited August 17, 2010 by izya12
Guest JoHn3R Posted August 24, 2010 Report Posted August 24, 2010 Nice ! Thank you ! CID = VODAP203mtd0.img
Guest metalfreek Posted September 29, 2010 Report Posted September 29, 2010 Hello, can someone explain step 3? Does it work on windows XP? I copied the editet mtd0.img and flash image on my sd-card. Do i have to start the phone in "fastboot usb" mode? Where do i have to type in the commands?
Guest bestdaniel20 Posted November 11, 2010 Report Posted November 11, 2010 As most of you know, people have been hard at work to fix the USB issues we've been seeing due to recovery setting us into USB debugmode. After unsuccessful attempts to change the kernel commandline , eg. to: disable_uart3=0 usb_h2w_sw=0 we've been successful in discovering (with the help of XDA-developers) that these switches are stored in the first NAND partition, mtd0, or 'misc'. You must be rooted to try the following, it seems you can't write to mtd0 without root. Do step 1 again if you have to. Also, SD card functionality has to work. For this, do 'fastboot oem enableqxdm 0' in fastboot mode. Steps involved: 1. Find out your CID. Go into fastboot mode, and do 'fastboot oem boot'. The log will say something like the following: #INFOTAG:Ramdisk OK #INFOTAG:smi ok, size = 0 #INFOTAG:hwid 0x0 #INFOTAG:skuid 0x21F04 #INFOTAG:hero panel = 0x0 #INFOTAG:engineerid = 0x0 #INFOMCP dual-die #INFOMCP dual-die #INFOTAG:mono-die = 0x0 #INFODevice CID is not super CID #INFOCID is HTC__E11 In this specific case, the CID is HTC__E11. 2. Get the following mtd0.img from here or from here: mirror provided by SgtDavePwnage. Edit this image to the CID you found above with a hex editor. 3. Get flash_image from here or from here: mirror provided by SgtDavePwnage. Move this to /data/ , and flash the modified image using: "/data/flash_image misc /data/mtd0.img" You can move both mtd0.img and flash_image by putting it on your sdcard, and issueing the following command in a terminal emulator: 'cat /sdcard/flash_image > /data/flash_image' 'cat /sdcard/mtd0.img > /data/mtd0.img' You might have to do 'chmod u+x /data/flash_image' before you run the commands (or chmod 755 /data/flash_image) 4. Repeat step 3 a couple of times if it doesn't seem to work well. 5. All done! Reboot, you should have normal usb connectivity. Post your 'fastboot oem boot' log and intermediate steps if it fails. Credits: -kubino @ XDA for providing us with the 'misc' information -TheProfessor @ irc.freenode.net #modaco for being the first test subject + debugging -adam235 @ irc.freenode.net #modaco for being a test subject as well + debugging -SgtDavePwnage @ irc.freenode.net #modaco -> moral support + debugging :rolleyes: -DrMon @ irc.freenode.net #modaco -> being brave enough to test on his non-bricked device! Click here to DONATE :huh:
Guest bestdaniel20 Posted November 12, 2010 Report Posted November 12, 2010 (edited) the best info :rolleyes: thnx :huh: my legend non-bricked img: INFOCID is HTC__032 INFOsetting->cid::HTC__032 mtd0.img Help me understand what to do with flash_image, when you give the link, and my pops a page with writing, what should I do? With hex editor does not know how to work, I tried to place the entire page in hex editor and could not understand anything. infocid is HTC__Y13 Edited November 12, 2010 by bestdaniel20
Guest mertins Posted December 13, 2010 Report Posted December 13, 2010 Guess something is wrong? C:\androidSDK\tools>fastboot eom enableqxdm 0 usage: fastboot [ <option> ] <command> commands: update <filename> reflash device from update.zip flashall flash boot + recovery + system flash <partition> [ <filename> ] write a file to a flash partition erase <partition> erase a flash partition getvar <variable> display a bootloader variable boot <kernel> [ <ramdisk> ] download and boot kernel flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it devices list all connected devices reboot reboot device normally reboot-bootloader reboot device into bootloader options: -w erase userdata and cache -s <serial number> specify device serial number -p <product> specify product name -c <cmdline> override kernel commandline -i <vendor id> specify a custom USB vendor id -b <base_addr> specify a custom kernel base address -n <page size> specify the nand page size. default: 2048 Any ideas? My device can be found by fastboot devices
Guest Dusan Djokic Posted December 19, 2010 Report Posted December 19, 2010 You, sir, are my hero! Thank you soooooo much!!!
Guest i4o Posted December 20, 2010 Report Posted December 20, 2010 (edited) Hi, my friend have a problem. When try to install FROYO 3.15, he receives error - Error:[110] It only appears a black screen with htc logo and ends there. Help please What can I do? C:\Documents and Settings\NEW>fastboot oem boot ... INFOsetup_tag addr=0x60000100 cmdline add=0x9D 07B198 INFOTAG:Ramdisk OK INFOTAG:smi ok, size = 0 INFOTAG:hwid 0x0 INFOTAG:skuid 0x22F00 INFOTAG:hero panel = 0x0 INFOTAG:engineerid = 0x0 INFOMCP dual-die INFOMCP dual-die INFOTAG:mono-die = 0x0 INFODevice CID is not super CID INFOCID is HTC__032 INFOsetting->cid::HTC__032 INFOserial number: HT03ZNX05896 INFOcommandline from head: no_console_suspend=1 console=null INFOcommand line length =445 INFOactive commandline: board_legend.disable_uart3=0 board_legen INFOd.usb_h2w_sw=0 board_legend.disable_sdcard=0 diag.enabled=0 INFOboard_legend.debug_uart=0 smisize=0 userdata_sel=0 androidbo INFOot.emmc=false androidboot.baseband=7.08.35.21 androidboot.c INFOid=HTC__032 androidboot.carrier=HTC-EastEurope androidboot.m INFOid=PB7610000 androidboot.keycaps=qwerty androidboot.mode=nor INFOmal androidboot.serialno=HT03ZNX05896 androidboot.bootloader INFO=1.01.0000 no_console_suspend=1 console=null INFOaARM_Partion[0].name=misc INFOaARM_Partion[1].name=recovery INFOaARM_Partion[2].name=boot INFOaARM_Partion[3].name=system INFOaARM_Partion[4].name=cache INFOaARM_Partion[5].name=userdata INFOpartition number=6 INFOValid partition num=6 FAILED (status read failed (Too many links)) finished. total time: 0.938s Problem is solved. Edited December 20, 2010 by i4o
Guest eepunk Posted December 27, 2010 Report Posted December 27, 2010 My Legend will sometimes (read: infrequently) mount with USB but by and large it just charges when plugged into a PC. I've tried the debricking technique but it hasn't had any positive outcomes. I've also tried three different cables and five different PCs. The same cables and PCs work with my friends' Android phones. The log; C:\Android\android-sdk-windows\tools>fastboot oem boot ... INFOsetup_tag addr=0x60000100 cmdline add=0x9D 07B198 INFOTAG:Ramdisk OK INFOTAG:smi ok, size = 0 INFOTAG:hwid 0x0 INFOTAG:skuid 0x22F00 INFOTAG:hero panel = 0x0 INFOTAG:engineerid = 0x0 INFOMCP dual-die INFOMCP dual-die INFOTAG:mono-die = 0x0 INFODevice CID is not super CID INFOCID is HTC__038 INFOsetting->cid::HTC__038 INFOserial number: HT043NX02726 INFOcommandline from head: no_console_suspend=1 console=null INFOcommand line length =440 INFOactive commandline: board_legend.disable_uart3=0 board_legen INFOd.usb_h2w_sw=0 board_legend.disable_sdcard=0 diag.enabled=0 INFOboard_legend.debug_uart=0 smisize=0 userdata_sel=0 androidbo INFOot.emmc=false androidboot.baseband=7.13.35.05 androidboot.c INFOid=HTC__038 androidboot.carrier=HTC-India androidboot.mid=PB INFO7610000 androidboot.keycaps=qwerty androidboot.mode=normal a INFOndroidboot.serialno=HT043NX02726 androidboot.bootloader=1.01 INFO.0000 no_console_suspend=1 console=null INFOaARM_Partion[0].name=misc INFOaARM_Partion[1].name=recovery INFOaARM_Partion[2].name=boot INFOaARM_Partion[3].name=system INFOaARM_Partion[4].name=cache INFOaARM_Partion[5].name=userdata INFOpartition number=6 INFOValid partition num=6 FAILED (status read failed (Too many links)) finished. total time: 0.902s [/codebox]
Guest Shawry_1981 Posted January 4, 2011 Report Posted January 4, 2011 (edited) I've been at this for days now to no evail. My USB bricked with my SD card after a recovery from cyanogenmods rom (should of stuck with custom modaco rom but wanted to see what else there was) Fixed the SD card no drama but the rest is hazy. I've tried so many different things that I'm not even sure if my device is still rooted. This is my 'fastboot oem boot' output: ________________________________________________________________ C:\AndroidSDK\tools>fastboot oem boot ... INFOsetup_tag addr=0x60000100 cmdline add=0x079570 INFOTAG:Ramdisk OK INFOTAG:smi ok, size = 0 INFOTAG:hwid 0x0 INFOTAG:skuid 0x22F00 INFOTAG:hero panel = 0x0 INFOTAG:engineerid = 0x0 INFOMCP dual-die INFOMCP dual-die INFOTAG:mono-die = 0x0 INFODevice CID is not super CID INFOCID is VODAP021 INFOsetting->cid::VODAP021 INFOserial number: HT05WNX00453 INFOcommandline from head: no_console_suspend=1 console=null INFOcommand line length =445 INFOactive commandline: board_legend.disable_uart3=1 board_legen INFOd.usb_h2w_sw=1 board_legend.disable_sdcard=0 diag.enabled=0 INFOboard_legend.debug_uart=0 smisize=0 userdata_sel=0 androidbo INFOot.emmc=false androidboot.baseband=7.08.35.21 androidboot.c INFOid=VODAP021 androidboot.carrier=VODA-Australia androidboot.m INFOid=PB7610000 androidboot.keycaps=qwerty androidboot.mode=nor INFOmal androidboot.serialno=HT05WNX00453 androidboot.bootloader INFO=0.43.0003 no_console_suspend=1 console=null INFOaARM_Partion[0].name=misc INFOaARM_Partion[1].name=recovery INFOaARM_Partion[2].name=boot INFOaARM_Partion[3].name=system INFOaARM_Partion[4].name=cache INFOaARM_Partion[5].name=userdata INFOpartition number=6 INFOValid partition num=6 INFOmpu_nand_acpu_rw 8F2 1000 FAILED (status read failed (Too many links)) finished. total time: 0.877s ________________________________________________________________ So my CID is VODAP021. I downloaded the mtd0legend and modified it in Hex editor to VODAP021,& renamed it mtd0, then downloaded flash_image. I put them on my (non goldcard) SD card in the root directory, as well as in a folder called 'data'.... am i on the right track? now I've used the cmd prompt to carry out the "/data/flash_image misc /data/mtd0.img" command, is this right? it didn't work so I'm guessing not. I couldn't get any terminal emulators to work on my phone from the marketplace. (leads me to believe my phone is no longer rooted). I went back to my original vodafone official release because I was following a random method to unbrick the usb, but it didn't work, obviously. Anyway, none of this has worked. Those commands don't find the path or it doesn't recognize the commands. When it says: _____________________________________________ Move this to /data/ , and flash the modified image using: "/data/flash_image misc /data/mtd0.img" _____________________________________________ in step 3. What exactly do you mean & how exactly is this done. Or, if you see the error of my ways in the dumbed down step by step above could you let me know. I've tried going through the entire process of creating a goldcard again, downgrading versions & rooting the phone again but I can't do any of it without usb working properly. Also tried HtcSync software downgrades & upgrades, sometimes the drivers will say they are installed but it still doesn't work properly. All I want to do is get back to the Custom Modaco ROM that I had running ever so sweetly, Argh Edited January 4, 2011 by Shawry_1981
Guest aikon96 Posted April 7, 2011 Report Posted April 7, 2011 Yeah, this saved my Legend ! Thank u very much! Here´s the VODAP102 from the German Vodaphone Legend: INFOCID is VODAP102 INFOsetting->cid::VODAP102 PS: Just rename "mtd0legend.img" -> "mtd0.img"mtd0legend.img
Guest sumpfbeere Posted May 11, 2011 Report Posted May 11, 2011 Is there another way to do this than with the fastboot binary? I can't connect my phone to a computer. Tried both Windows and Linux on 3 different machines :unsure:.
Guest Ganhiru Posted July 22, 2011 Report Posted July 22, 2011 I can confirm that this fixes the USB soft brick issue I experienced ass wel. ( HTC Legend ) After that I followed the r4-legend-root Step 1 and skipped step two by placing Clockworkmod as update.zip on the SD. Recovery Vol up + power. And I was back in the game. { I lost that other game while typing this } It took me some searching. Ty for the fix.
Guest anteelope Posted August 7, 2011 Report Posted August 7, 2011 Hi All ! This is my htc legend fastboot oem boot result. Seems everthying ok, but usb still not working. The phone was rooted. I tried the su commands many times in terminal mode on the phone. I have never got error message, but nothing changed. I was reading more forums and i couldn't find any solution for my problems. What are you thinking? What is the problem? C:\Documents and Settings\Rendszergazda\Asztal\HTC HERO\android-sdk-windows\tool s>fastboot oem boot ... (bootloader) setup_tag addr=0x60000100 cmdline add=0x9D07B198 (bootloader) TAG:Ramdisk OK (bootloader) TAG:smi ok, size = 0 (bootloader) TAG:hwid 0x0 (bootloader) TAG:skuid 0x22F00 (bootloader) TAG:hero panel = 0x0 (bootloader) TAG:engineerid = 0x0 (bootloader) MCP dual-die (bootloader) MCP dual-die (bootloader) TAG:mono-die = 0x0 (bootloader) Device CID is not super CID (bootloader) CID is HTC__032 (bootloader) setting->cid::HTC__032 (bootloader) serial number: HT03ZNX01346 (bootloader) commandline from head: no_console_suspend=1 console=null (bootloader) command line length =446 (bootloader) active commandline: board_legend.disable_uart3=0 board_legen (bootloader) d.usb_h2w_sw=0 board_legend.disable_sdcard=0 diag.enabled=0 (bootloader) board_legend.debug_uart=0 smisize=0 userdata_sel=0 androidbo (bootloader) ot.emmc=false androidboot.baseband=7.05.35.26L androidboot. (bootloader) cid=HTC__032 androidboot.carrier=HTC-EastEurope androidboot. (bootloader) mid=PB7610000 androidboot.keycaps=qwerty androidboot.mode=no (bootloader) rmal androidboot.serialno=HT03ZNX01346 androidboot.bootloade (bootloader) r=1.01.0000 no_console_suspend=1 console=null (bootloader) aARM_Partion[0].name=misc (bootloader) aARM_Partion[1].name=recovery (bootloader) aARM_Partion[2].name=boot (bootloader) aARM_Partion[3].name=system (bootloader) aARM_Partion[4].name=cache (bootloader) aARM_Partion[5].name=userdata (bootloader) partition number=6 (bootloader) Valid partition num=6 FAILED (status read failed (Too many links)) finished. total time: 1.188s
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now