Guest fischschneehase Posted June 6, 2010 Report Posted June 6, 2010 So the froyo rom runs at 1 ghz? My set cpu says just 700?!
Guest mirox3m Posted June 6, 2010 Report Posted June 6, 2010 Screen battery consumption is related to the LED backlight, which is related to the brightness setting. The graphic bug not likely a battery drain. The warmness may be due to the higher CPU frequency, even the stock 2.1 Eclair ROMs get warm after some time at 768 Mhz, and Froyo uses higher frequency than that. It sais "Display" and I haven't seen such a high percentage in other ROMs.
Guest bais Posted June 6, 2010 Report Posted June 6, 2010 I don't use this ROM right now but you can try to disable auto brightness, if it's a display issue. Maybe it will help.
Guest fischschneehase Posted June 6, 2010 Report Posted June 6, 2010 Nope doesnt fix it .... setvpu says max 700?! At which speed runs theel rom?
Guest Quipeace Posted June 6, 2010 Report Posted June 6, 2010 Nope doesnt fix it .... setvpu says max 700?! At which speed runs theel rom? Stock frequency is 768MHz.
Guest fischschneehase Posted June 6, 2010 Report Posted June 6, 2010 So it cant be the reason for the temperature... has somone else noticed this issue?
Guest ma4000 Posted June 6, 2010 Report Posted June 6, 2010 congrats phhusson, you just made it on engadget! http://www.engadget.com/2010/06/06/acer-li...cpu-unlock-vid/
Guest akira.pwr Posted June 6, 2010 Report Posted June 6, 2010 So it cant be the reason for the temperature... has somone else noticed this issue? Same for me, for first time i heared the audible warning for the heat, i turned off and opened the back cover, it was so hot...
Guest fischschneehase Posted June 6, 2010 Report Posted June 6, 2010 ad which temperature you got the warning? mine is staying at arround 35 degrees?! is that okay? wont my device take damage?
Guest chingy1788 Posted June 6, 2010 Report Posted June 6, 2010 usually temperature warnings happen at about 50C 35 is perfectly fine for your device Though this is the temp for the battery, lithium batteries do not mix with heat, 60 is the limit. The only time my phone went to 50C+ is when I was using it as a GPS device, placed on my dashboard of my car. It was in the hot sun, running Sygic.
Guest fischschneehase Posted June 6, 2010 Report Posted June 6, 2010 okay thanks but i dont have to worry if it goes up to 40 ?
Guest ma4000 Posted June 6, 2010 Report Posted June 6, 2010 absolutely not, thats just a bit above body temperature
Guest fischschneehase Posted June 6, 2010 Report Posted June 6, 2010 great thanks...btw copilot doesnt work on starting it says unable to load code
Guest toadwong001 Posted June 7, 2010 Report Posted June 7, 2010 i can't go to USB debugging mode (because USB is now working?) Please teach me how to reboot to recovery....i am using malez recovery image thank you very much
Guest toadwong001 Posted June 7, 2010 Report Posted June 7, 2010 i can't go to USB debugging mode (because USB is now working?) Please teach me how to reboot to recovery....i am using malez recovery image thank you very much OK NOW YEAH
Guest akira.pwr Posted June 7, 2010 Report Posted June 7, 2010 (edited) OK NOW YEAH After 2 days it appear grafic bugs are less than the beginning, anyone have the same impression than me? Edited June 7, 2010 by akira.pwr
Guest Vishal Arya Posted June 7, 2010 Report Posted June 7, 2010 when i make a call , other party can't hear me .... i checked the hold button also and its not active anyone else face similar issue
Guest Charlton22 Posted June 7, 2010 Report Posted June 7, 2010 when i make a call , other party can't hear me .... i checked the hold button also and its not active anyone else face similar issue Mine is running great after one day of full use.... Everything works fine.. Also running @920Mhz is great.... Tried other locations for 3g HSDPA Speed.. Speed don't changes.. always 1.4Mb/s Download... & 0.6Mb/s Upload... .. Its not a location/signal issue..
Guest fischschneehase Posted June 7, 2010 Report Posted June 7, 2010 i can't go to USB debugging mode (because USB is now working?) Please teach me how to reboot to recovery....i am using malez recovery image thank you very much Sometimes i ask my self wether the people cant read or if they are just stupid... before you flash a device you have to read r Thr tutorital!!!!thats important!! Did you made an nandroid backup before flashing? I hope so... Shut down the phone and press at the same time volume down, kamera and the poweer button. hold the buttons until the phone vibrates 3 times then it will boot in recovery ....now you are able to restore nandeoid backups. But be carefull restoring just works when backup und current fw version are identikal. So you have to restore a backup of the donut bin.
Guest fischschneehase Posted June 7, 2010 Report Posted June 7, 2010 charlaton2@ charlaton22. How did you aktivatet 1ghz?
Guest Charlton22 Posted June 7, 2010 Report Posted June 7, 2010 (edited) charlaton2@ charlaton22. How did you aktivatet 1ghz? Froyo Donwload Links.... 998Mhz, 920Mhz, 880Mhz & 768Mhz Stock are all avaliable.... Here you can find all the downloads regarding to Froyo THANKS to phhusson >>>> Installation Instructions <<<< adb reboot bootloader fastboot -i 0x502 flash boot boot.XXX.img fastboot -i 0x502 reboot You'll need Android SDK to perform this upgrade... Edited June 7, 2010 by Charlton22
Guest mirox3m Posted June 7, 2010 Report Posted June 7, 2010 congrats phhusson, you just made it on engadget! http://www.engadget.com/2010/06/06/acer-li...cpu-unlock-vid/ Yeah!!!! I rote them an email when I made the video. Thanks again Phhusson!
Guest fightspv Posted June 7, 2010 Report Posted June 7, 2010 just retry it this morning with 880 kernel and no more nosound call bug. Maybe another one (but i will confirm it tonight with another phone), when i'm ending a call, it end on liquid but not on the other phone (my appartment basic standard phone), try to reboot the liquid and call again and it goes directly on the voice mail, will check this tonight with another cell phone :)
Guest Edward.W Posted June 7, 2010 Report Posted June 7, 2010 Froyo Donwload Links.... 998Mhz, 920Mhz, 880Mhz & 768Mhz Stock are all avaliable.... Here you can find all the downloads regarding to Froyo THANKS to phhusson >>>> Installation Instructions <<<< adb reboot bootloader fastboot -i 0x502 flash boot boot.XXX.img fastboot -i 0x502 reboot You'll need Android SDK to perform this upgrade... Which one you prefer more? :) Or should I flash the998MHz.img directly :)
Guest Charlton22 Posted June 7, 2010 Report Posted June 7, 2010 Which one you prefer more? :) Or should I flash the998MHz.img directly :) Currently im using the 920Mhz, and its preety stable. No restarting & No overheathing... Battery life seems to be normal for me... (Im used to charge it every day) I think im going to try the 998Mhz this afternoon... This cannot damage my device... or it can?
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now