G-Sensor and SPB 3.5.4

[Guest Dhruv94]

Hi guys, im fairly new at the forums and i just got a omnia 2. ive install spb mobile shell 3.5.4 and im trying to enable the g sensor task switcher carrousel( Pardon my spelling) to work.

ive installed the openGl and all the htcgsensor .dlls, it even shows me a option to enable g sensor in that carrousel's or task switcher window but when i enable it nothing changes... PLEASEE HELLLPPP

[Guest Dhruv94]

Sigh.. Anyone?

[Guest dwallersv]

Take a valium, dude. You posted the thread, and then ten minutes later posted again complaining there were no answers. That's almost deranged caffiene intoxication.

We are all not simply sitting around here waiting for your posts so we can eagerly respond. Give it at least half a day before you start complaining no one's answered.

As for your question: I don't know what the problem is. The G-sensor works on my i920 with 3.5.4 simply by enabling it in MS.

You do need to enable 3D with the following registry setting to get 3D effects on the Omnia. This registry setting is disabled by default. So, if you haven't done this yet, make the change and see if it solves the problem:

HKLM\Software\Spb Software House 2\Spb Mobile Shell\Gl\GlEnabled => 1

[Guest Dhruv94]

Take a valium, dude. You posted the thread, and then ten minutes later posted again complaining there were no answers. That's almost deranged caffiene intoxication.

We are all not simply sitting around here waiting for your posts so we can eagerly respond. Give it at least half a day before you start complaining no one's answered.

As for your question: I don't know what the problem is. The G-sensor works on my i920 with 3.5.4 simply by enabling it in MS.

You do need to enable 3D with the following registry setting to get 3D effects on the Omnia. This registry setting is disabled by default. So, if you haven't done this yet, make the change and see if it solves the problem:

HKLM\Software\Spb Software House 2\Spb Mobile Shell\Gl\GlEnabled => 1

thanks man and ye sorry about that.. i dont get to use the net every day because im havign some troubles with my network so i got impatient.

also i opened reg editor and that key is already seat to 1 and just in case i ptu 1 again and reset my phone ( soft) and nothing happened.. and 3d is working for me just not the tilt feature

Edited June 10, 2010 by Dhruv94

[Guest Dhruv94]

Heres a pic..

Edited June 10, 2010 by Dhruv94

[Guest dwallersv]

Something else to try: Do you have the Samsung SDK installed? That's generally a pre-requisite to getting many of these kinds of things working. I've attached the latest version, 2.2. Install it on your device and see if it works.

smi_wm_pro_sdk_redist_2_2_0.cab

Edited June 10, 2010 by dwallersv

[Guest Dhruv94]

Something else to try: Do you have the Samsung SDK installed? That's generally a pre-requisite to getting many of these kinds of things working. I've attached the latest version, 2.2. Install it on your device and see if it works.

smi_wm_pro_sdk_redist_2_2_0.cab

k so i installed it into my device, rebooted and well.. visibly theres nothing installed in the start menu btu i guess thats normal, when i open up carousel the 3d is still working perfectly like before with my finger swipes, shows the whole spinning and above view etc. but the tilt is still not working. i have this application installed in the system menu in settings called HTCEMU Calibrator which i got with HtcSensorsdk.dll thing, it has this calibration tool but whenever i click it nothing happens it still doesnt do anything at all..

[Guest Dhruv94]

k so i installed it into my device, rebooted and well.. visibly theres nothing installed in the start menu btu i guess thats normal, when i open up carousel the 3d is still working perfectly like before with my finger swipes, shows the whole spinning and above view etc. but the tilt is still not working. i have this application installed in the system menu in settings called HTCEMU Calibrator which i got with HtcSensorsdk.dll thing, it has this calibration tool but whenever i click it nothing happens it still doesnt do anything at all..

SWEET! i got it working! it seemed that the htcsensorsdk.dll file i downloaded was not the correct one so i downloaded another oen and placed it in windows and restarted.

now it works fully... just lags.. =(

oh well..

thanks man!

[Guest Dhruv94]

For anyone else who might be having trouble like me.. here are the files i used.

install the OpenGLESv1 cab ,

copy the htc... dll file to windows

install the samsung sdk file that dwallersv gave

and restart.

after that enter the carrousel window and click on the little tab on the bottom right

and turn on g-sensor

after that it should work .

if it lags enable high performance but be warned it will suck the life out of your battery much quicker

all files are from the amazing members of modaco.com forum

OpenGLESv1.cab

HTCSensorSDK.zip

Edited June 10, 2010 by Dhruv94

[Guest Coolsurfer]

For anyone else who might be having trouble like me.. here are the files i used.

install the OpenGLESv1 cab ,

copy the htc... dll file to windows

install the samsung sdk file that dwallersv gave

and restart.

after that enter the carrousel window and click on the little tab on the bottom right

and turn on g-sensor

after that it should work .

if it lags enable high performance but be warned it will suck the life out of your battery much quicker

all files are from the amazing members of modaco.com forum

Where do we copy the htc dll file to? Which folder on the omnia? Thanks

[Guest the sandman]

Where do we copy the htc dll file to? Which folder on the omnia? Thanks

copy it to the \Windows folder