Guest simoneser Posted June 28, 2010 Report Posted June 28, 2010 (edited) Ok, but a 1.3V version :D (and adds static voltage scaling, god knows what happens to battery life with it.) Touch screen is messed up :D Try these values for sensitivity: 20\50 :lol: PS: I haven't understood if battery is better or worse with 1.3V :) Edited June 28, 2010 by simoneser
Guest phhusson Posted June 28, 2010 Report Posted June 28, 2010 Touch screen is messed up :D Try these values for sensitivity: 20\50 :lol: HAHA. Won't do, it can be setted from userland, I've already enough different kernels :D PS: I haven't understood if battery is better or worse with 1.3V :) Could be better :)
Guest nameless' Posted June 28, 2010 Report Posted June 28, 2010 I'd say "Anything else ?" again, but I'm starting to feel a bit exhausted /o\ Back to Froyo :lol:
Guest Piter1225 Posted June 28, 2010 Report Posted June 28, 2010 (edited) Can somebody get on GTalk or something and help me bring my device back to life? Please? Download my pack of boot.img for 1. 100. 15 Than download the boot.img for rom u use Extract to folder my pack Replace one of mine boot.img with the one u have downloaded (Rename it properly) Connect Liquid in fastboot mode to PC (< + camera when u see battery charging on the screen) Run proper bat file Edit: it look like I'm bit slow Edited June 28, 2010 by Piter1225
Guest pikaone Posted June 28, 2010 Report Posted June 28, 2010 thanks for your hard work phh, when you have a little time, can you do a new 920 kernel with ram .... because 998 dont work for me even with 1,3v. why not tomorrow, i think you are tired now :lol:
Guest liquid_it Posted June 28, 2010 Report Posted June 28, 2010 I'd say "Anything else ?" again, but I'm starting to feel a bit exhausted /o\ I bet you should take a rest.. You deserve it! To everyone else: OCed boot.img may be fun, but remember a few things:OC is generally unstable (freezes, reboots, etc..), causes your device to drain battery faster and to get hot easly.OC without overvolt is even more unstable, causes your device to drain battery even faster and to get even hotter.yes, OC can damage your device phisically, because of temperature and/or overvoltage applied to cpu, which can't be properly cooled.OC (but this is just MHO) is not of much use going over 880 MHz, as you get just an unstable, battery hungry, oven! :lol: :D :D Don't just ask for something to be made, try and find how to make it yourself! :)
Guest simoneser Posted June 28, 2010 Report Posted June 28, 2010 (edited) HAHA. Won't do, it can be setted from userland, I've already enough different kernels :D Could be better :) Cool, but how can I modifiy sensitivity? :lol: Touch screen is unusable: to press a widget on the right corner i have to press in the left corner :D EDIT-Same problem on 880mHz :) EDIT2-Again, same problem on 920mhz... Edited June 28, 2010 by simoneser
Guest phhusson Posted June 28, 2010 Report Posted June 28, 2010 (edited) thanks for your hard work phh, when you have a little time, can you do a new 920 kernel with ram .... because 998 dont work for me even with 1,3v. why not tomorrow, i think you are tired now :D Done, but nothing else for today. Cool, but how can I modifiy sensitivity? :lol: Touch screen is unusable: to press a widget on the right corner i have to press in the left corner :D EDIT-Same problem on 880mHz :) EDIT2-Again, same problem on 920mhz... DAMN I forgot half of the TS patch GRAOUMPF. Ok I fix them today. Edited June 28, 2010 by phhusson
Guest pikaone Posted June 28, 2010 Report Posted June 28, 2010 Cool, but how can I modifiy sensitivity? :lol: Touch screen is unusable: to press a widget on the right corner i have to press in the left corner :D EDIT-Same problem on 880mHz :) EDIT2-Again, same problem on 920mhz... the phh's kernels dont work on your nokia ! :D
Guest simoneser Posted June 28, 2010 Report Posted June 28, 2010 (edited) Sorry phh for the disturb, i'm feeling noob...usually I don't do a lot of requests :lol: ONLY when you want\have spare time, could you do a 998mhz 1.3V with ramzswap but without TS fix? Because device is unusable. Thank you and sorry again EDIT-Ok, read it now. Thank you. Edited June 28, 2010 by simoneser
Guest phhusson Posted June 28, 2010 Report Posted June 28, 2010 Cool, but how can I modifiy sensitivity? :lol: Touch screen is unusable: to press a widget on the right corner i have to press in the left corner :D EDIT-Same problem on 880mHz :D EDIT2-Again, same problem on 920mhz... Fixed for [email protected] and 920. I deleted 880
Guest pikaone Posted June 28, 2010 Report Posted June 28, 2010 nice phh ! your are Just In Time as froyo :lol:
Guest simoneser Posted June 28, 2010 Report Posted June 28, 2010 Fixed for [email protected] and 920. I deleted 880 Working great! Thanks a lot :lol:
Guest pikaone Posted June 28, 2010 Report Posted June 28, 2010 920 kernel with ts reboot and reboot now, maybe 1,3v dont work for me
Guest azuwis Posted June 28, 2010 Report Posted June 28, 2010 I'd say "Anything else ?" again, but I'm starting to feel a bit exhausted /o\ Awesome, phh, you're fast. Currently using 1.100.15, will do some investigation tomorrow(it's 0:38 here) to figure out how to unpack and repack boot.img(may be how to compile an android kernel too). Take some rest, phh. You deserve that. :lol:
Guest Nesli Posted June 28, 2010 Report Posted June 28, 2010 Any chance to 998mhz 1,3V kernel for 1.100.15 ? :lol:
Guest Piter1225 Posted June 28, 2010 Report Posted June 28, 2010 Any chance to 998mhz 1,3V kernel for 1.100.15 ? :lol: I'm out for a while, when I get back home I'll repack it.
Guest HustlinDaily Posted June 28, 2010 Report Posted June 28, 2010 Edit: it look like I'm bit slow Yup. Back to life. Thank you nonetheless!
Guest Nesli Posted June 28, 2010 Report Posted June 28, 2010 (edited) TO Piter1225 Perfect, thanks man :lol: Edited June 28, 2010 by Nesli
Guest phhusson Posted June 28, 2010 Report Posted June 28, 2010 I'm out for a while, when I get back home I'll repack it. Take note that I changed initramfs for ramzswap.
Guest pikaone Posted June 28, 2010 Report Posted June 28, 2010 phh, your new 920 with ts... reboot for me, i dont understand why ?
Guest simoneser Posted June 28, 2010 Report Posted June 28, 2010 (edited) Can anyone with 998mHz kernel (the one with ramzswap, 1.3V etc) check a thing? Try to open this forum on the browser...while loading the page the browser close itself...I have tried reflashing 998mhz without other stuff and it doesn't close. EDIT - Tried with 920mhz...it works good. I'll leave this :D EDIT2- Reflashed 998mhz V2 and it's working :lol: Edited June 28, 2010 by simoneser
Guest Dona' Posted June 28, 2010 Report Posted June 28, 2010 My phone sometimes doesn't wake up with 880 MHz kernel ... wtf ? I'm not using 3g, wi-fi, setcpu. Is it normal ? Did anyone already had same problem with a 880 MHz kernel or am I unlucky ?
Guest rafyvitto Posted June 28, 2010 Report Posted June 28, 2010 (edited) I flashed csics5 998mhz at 1.25v boot.img for 1.100.05, running perfectly on my device, no reboots, freezes, or lockups of any kind. Here are hes posts: http://android.modaco.com/content-page/312...00-15/page/60/# kernels Wifi fix: http://android.modaco.com/content-page/312...00-15/page/60/# Edited June 28, 2010 by rafyvitto
Guest malez Posted June 28, 2010 Report Posted June 28, 2010 Cool, but how can I modifiy sensitivity? :lol: Touch screen is unusable: to press a widget on the right corner i have to press in the left corner :D EDIT-Same problem on 880mHz :D EDIT2-Again, same problem on 920mhz... If you are under lcr 1.7 Run gscript => add file => load => increaseSensitivity.sh => run (there is also a restoreSensitivity.sh to restore default values) Hope that was what you where asking for
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now