[ROM] Xian (LiquidF) v1.2a [11/1/2010] - CM 6.1.0-RC - MIUI 11.05

[Guest xian1243]

:P I'll be working on some more things before I release, I still have a couple of things to fix. :) Just letting you know that I'm working on it.

Like a car hit the android? I'm sorry but I don't understand your statement. Peut-être que tu pourrais expliquer en français ? Je comprendrais peut-être un petit peu mieux :(

Still haven't gotten messaging LED working, but I'm going to dig into the frameworks to see where it's called in the Stock Froyo ROM.

[Guest heyparis]

ok thanks xian1243 merciiiiiiiiiiiiiiiiiiiiiiiiii

:P :)

[Guest lvcargnini]

I don't see what's wrong with the boot image, it looks a lot better than most of the boot images used by other ROMs. The boot animation is the default CM6 boot animation.

Man, sometimes I hate Google Translate so much, as it forces me to reread things at least 3 times before I know what people want to say... and even then I'm wrong sometimes. Case and point: your second post, which I still can't figure out.

What I mean is during the boot on the start of the phone there is a flash like the entire screen goes yellow, switch some colors than back to normal, but this was using boot on Malez Recovery.

The second post is Graphic User Interface - GUI, the normal screen went like into WTF-OMG mode, was like I was pressing all around the screen in aleatory mode.

But this are minor issues in fact, currently I'm having problems to install swype, mount the SD-Card, that are fare more important than the initial flash on the screen when I start the phone after turned it off or rebooting, in fact rebooting the phone doesn't gave me the problem of the yellow flash.

[Guest lvcargnini]

:P I'll be working on some more things before I release, I still have a couple of things to fix. :) Just letting you know that I'm working on it.

Like a car hit the android? I'm sorry but I don't understand your statement. Peut-être que tu pourrais expliquer en français ? Je comprendrais peut-être un petit peu mieux :(

Still haven't gotten messaging LED working, but I'm going to dig into the frameworks to see where it's called in the Stock Froyo ROM.

Thanks, N'inquiète pas, I'll keep in english for the sacre of the forum. Sorry was like 3:00 AM here.

But the point was I was trying to pres the search on Market, and the was like a burst os presses occurred, in random positions of the screen, bringing the alert bar, clicking where it was supposed to click and so on.

The point is I'm not sure if this is related to CM6 or the original ROM leaked, my opinion is related to the original leaked bin.

The Screen when start the phone sometimes shows a yellow color in entire screen, that was the previous post, but anyways the CM6 seems to be working pretty fine the major problem is definitely beacuse I'm using this new leaked rom of Froyo.

[Guest snootched]

Thanks, N'inquiète pas, I'll keep in english for the sacre of the forum. Sorry was like 3:00 AM here.

But the point was I was trying to pres the search on Market, and the was like a burst os presses occurred, in random positions of the screen, bringing the alert bar, clicking where it was supposed to click and so on.

The point is I'm not sure if this is related to CM6 or the original ROM leaked, my opinion is related to the original leaked bin.

The Screen when start the phone sometimes shows a yellow color in entire screen, that was the previous post, but anyways the CM6 seems to be working pretty fine the major problem is definitely beacuse I'm using this new leaked rom of Froyo.

I have had this issue before - the bursting of what appears to be key presses, bringing up and down the notification bar etc. This is related to the screen sensitivity. I use LCR, so I used the script on that ROM to set the sensitivity on boot up. This might help you... I know when I installed Phh's rom for a little bit - I had this issue. I could not even complete setup until I went in and manually adjusted the sensitivity via adb shell.

Not sure if there's any scripts in CM6 that can help you do this on boot up... Hope that helps.

[Guest xian1243]

Sensitivity can be tweaked, at startup or with a shell script.

Command for ADB shell ->

replace 35 with the value you want

echo 35 > /sys/devices/platform/i2c-adapter/i2c-0/0-005c/sensitivity

echo 35 > /sys/devices/platform/i2c-adapter/i2c-0/0-005c/noise

that should help

[Guest better12hk]

xian 1243 did v1.2 comming tonight?

[Guest xian1243]

Please stop asking, I've already answered that question many times.

Edited September 12, 2010 by xian1243

[Guest lvcargnini]

Sensitivity can be tweaked, at startup or with a shell script.

Command for ADB shell ->

replace 35 with the value you want

echo 35 > /sys/devices/platform/i2c-adapter/i2c-0/0-005c/sensitivity

echo 35 > /sys/devices/platform/i2c-adapter/i2c-0/0-005c/noise

that should help

Really thanks, I read the issue post on LCR list, used as value 80, the standard. I really appreciate your help.

Also I know how to code, how can I help you in the development ?

[Guest lvcargnini]

xian 1243 did v1.2 comming tonight?

Man relax, give some time to Xian1243, I want the rom too, but is like they say 'one woman took 9 months to birth a child, 9 women can't do in one month' , sometimes things take some time and that is it.

:P

[Guest Apocangel]

@Xian While i was reading posts a few days ago, a guy ( don't really remember who ) pointed out that the DolbyMobile Settings were still present but not displayed. That you could access it by creating a shortcut to the Settings activity. When you try to activate Dolby the phone resets.

Someone in XDA told me that it might be that the Settings are present but the correct "drivers" are not. Since LCR 1.7.X has the drivers, is there a way of porting what is missing to CM6?

(Off-Topic question: Anyone preordering the Acer Liquid Metal? I'd love to have it and loading it with Xian/Koud CM6)

[Guest mmick]

I´m a bit confused:

1) which is the default Acer ROMs sensibility? 35?

2) which is the default LCR ROM sensibility? I´m on LCR 1.8.0.1 and a little (just a little) higher sensivity

3) As it seems 80 is too sensitive, what is a safe but higher than the default value?

4) how can I set it always on boot?

[Guest xian1243]

The lower the value, the more sensitive it is. 30 is default on all froyo ROMs, afaik, including mine, 75 is default Acer. You can set it on boot with a script I will provide in v1.2.

[Guest mmick]

The lower the value, the more sensitive it is. 30 is default on all froyo ROMs, afaik, including mine, 75 is default Acer. You can set it on boot with a script I will provide in v1.2.

Thanks for the quick answer! Very good to know :P Good work Xian! My LCR 1.8.01 is looking forward to be replaced by v1.2 if you manage to fix the proximity sensor and all the LEDs :)

[Guest lvcargnini]

Xian could you possibly change the notification bar color to black or add an option into cyanomod menu so I can switch it to black or transparent.

Edited September 12, 2010 by lvcargnini

[Guest koudelka]

Xian could you possibly change the notification bar color to black or add an option into cyanomod menu so I can switch it to black or transparent.

that is already function in cyanogen. please check settings and cyanogen settings.

[Guest xian1243]

Releasing soon :P

[Guest Ximo F. Verde]

Hello Xian, thanx for all your hard work :P Is it possible to flash the 1.2 over the leaked 2.2 ROM? Have u tested it? Or do I have to flash back to 2.100.07? thanx again

[Guest Quipeace]

*cut*

Still haven't gotten messaging LED working, but I'm going to dig into the frameworks to see where it's called in the Stock Froyo ROM.

You -could- use lights.qsd8k.so from the froyo leak, I suppose that's the easiest method.

[Guest Sph1re]

Hooo! yeah!!!

good new Xian!

I hate to test! :P

[Guest Delnar_Ersike]

Hello Xian, thanx for all your hard work :P Is it possible to flash the 1.2 over the leaked 2.2 ROM? Have u tested it? Or do I have to flash back to 2.100.07? thanx again

I suppose so, since all you're using then is the new radio.

Xian could you possibly change the notification bar color to black or add an option into cyanomod menu so I can switch it to black or transparent.

Go into Settings > CyanogenMod Settings > User Interface and everything will be under the "Status Bar Customization" subcategory. Don't forget to change to color on the date, service provider text, and notification text to white if you change the bar and the pull-down menu to the dark version (just check the boxes "Custom notification bar" and "Custom pulldown bar" in Notification Colors)!

Edited September 12, 2010 by Delnar_Ersike

[Guest Ramdanih]

Releasing soon :P

Waiting. :)

Thx. Xian

[Guest ahsid]

So are proximity sensors, bluetooth, stock wifi tethering, camcorder and bluetooth all working ??

I know I'm very curious... :P

[Guest mmick]

So are proximity sensors, bluetooth, stock wifi tethering, camcorder and bluetooth all working ??

I know I'm very curious... :P

I hope so, I will change if all that is fixed :-)

[Guest opschinken]

can ich flash the rom on OS_Acer_2.100.07.EMEA.GEN1_A21E_Liquid E the acer tool not work on my pc i have anytime a windows crit when i start it