[ROM] Xian (LiquidF) v1.2a [11/1/2010] - CM 6.1.0-RC - MIUI 11.05

[Guest Sewpra]

I didn't update the radio yet, but I did flash the new LiquidF ROM and I now have an infinite boot, I downloaded the alternate image for solution, but now I can not power off the device and don't know what method I should use to enter Recovery, any help greatly appreciated, thanks guys.

[Guest Sewpra]

Ok now I am slightly worried lol, I tried using the button combo to boot into Recovery, and I have a recovery type screen stuck displaying "Partition checksum spash1 chksum =8ba9da08 OK" then three lines of read text corresponding with boot, recovery, and system, all "FAIL" with a fourth line also displaying "FAIL".

EDIT: Did a battery pull and the button combo another time, I got it booted into Recovery now, I just need to transfer the alt image.zip to the phone and try flashing that.

EDIT: Ok so now I've gotten stuck, I flashed the first alt img to solve the boot loop, rebooted after, and now I still have a boot loop. Xian I tried to grab your second alternative boot loop img, but the link no longer seems to work?

Edited September 15, 2010 by Sewpra

[Guest Sewpra]

This infinite boot loop is very persistent, I can not get rid of it. I'm assuming I need that 3rd alternate img which is not linked properly?

EDIT: Fixed, I think, I used some sort of Froyo91 3.3 Fix img, flashed that and it fixed it, if anyone could confirm for me that I made the right choice doing that, I'd appreciate it, thanks.

Edited September 15, 2010 by Sewpra

[Guest xian1243]

It's an clearly incompatibility between the bootloaders (I use a special way of packing each ROM, this one being tested on the Froyo .bin), I advise you to flash Xian LiquidE, boot, then flash the latest .bin. It's simply a matter of settings, but some .bin are configured differently than others. Are you using a LiquidE or a standard Liquid ?

[Guest xian1243]

Sorry for the double post, but if anyone is interested in watching my progress on Cyanogen official support, you can watch me on github.

Vendor Tree

Device Tree

Xian

[Guest Sewpra]

I am using a LiquidE, I seem to of gotten booted into the new LiquidF ROM, but for some reason I can't disable haptic feedback? I tried disabling all of it, but I still get vibration when pressing the back button on my LiquidE, very annoying, is there a fix?

[Guest xian1243]

Wait for v1.2 which has fixed haptic feedback, and LiquidE support.

[Guest sette7nani]

Sorry for the double post, but if anyone is interested in watching my progress on Cyanogen official support, you can watch me on github.

Vendor Tree

Device Tree

Xian

thumbs up for mr xian

[Guest Sph1re]

I respect you greatly Xian

I wait quietly :lol:

Edited September 15, 2010 by Sph1re

[Guest lvcargnini]

Xian, thanks for all the work up to now.

I just installed the fix for GPS and USB, works perfectly thanks.

I was using the app GPS status and I'm trying to activate the AGPS, I'm connected trough WiFI no 3G+, and it is saying that will do it when a data connection became available. if you look the third image in the upper icons, the wifi is active.

Do you have any idea why this could be happening or this is an issue ?

img1:

img2:

img3:

[Guest Sewpra]

Wait for v1.2 which has fixed haptic feedback, and LiquidE support.

Alright lol, I hope that comes out soon, everything else seems great.

[Guest Ximo F. Verde]

Hello Xian and many thanx for all ur hard work. I got a couple of questions for you, which id rather ask now (before 1.2 is out) and maybe u'll have the time to answer :lol:

A) Im currently running LS 2.2 beta based on the froyo leak. Even though its a good efford on behalf of LSteam, its still on beta and.. well.. im really interested on the goodies u are cooking at the moment :) So, when 1.2 is out, how do i flash? Im sure that i cannot flash over LS2.2, so should i make a clean install of some 2.1 ROM and then apply a patch? Can u please clarify the flashing procedure for me? (in detail if this is possible, i have only flashed a few custom ROMs until now and im sort of afraid of bricking my Liquid). I dont mind wiping all data on my phone (contacts, apps, everything) so i dont really care about backing-up, if this is any help to the situation.

:( I read a few posts before that u managed to have 480p@30fps!! Is this a fact?? No more choppy 10fps video recording??? If this is the case i have to say that i am very very impressed (once more!).

C) I have been messing around with flash performance latery, trying various websites/browsers/flash 10.1 versions. After installing the latest flash (10.1.92.10) i noticed a huge performance boost on dolphin hd. In fact i watched southparkstudios.com flash episodes on HD (that should be at least 480p, the quality on the screen was absolutely stunning) with much less stutter and chopyness than before. It was actually very watchable and so was all the videos i tried on youtube (mind that there is not possible to switch from 360p to 480p, due to flash interface bugs) which were very fluid too. Im only mentioning this in case you want to have flash built-in in the ROM, the latest version seems much better than anyone else i have tried.

Thats all for now, i hope ull find the time to answer, wish u good results. Many thanx for all ur work again

[Guest beghiero]

I was using the app GPS status and I'm trying to activate the AGPS, I'm connected trough WiFI no 3G+, and it is saying that will do it when a data connection became available. if you look the third image in the upper icons, the wifi is active.

Do you have any idea why this could be happening or this is an issue ?

I think that A-GPS uses the GSM/UMTS cell location to help GPS reception.

If you disable the 2G/3G DATA connection, A-GPS maybe is not available....

Somewhere A-GPS is working also from the WiFi network, where Google collected data on WiFi hotspot (if they can: in Germany they was prosecuted for that...).

But ... I'm not sure.

Ciao, Piero.

[Guest xian1243]

- Fixed headset icon not showing when plugged in.

Still working on SoftAP, it's a problem, as it's half working with new library, but breaks GPS... It may take a couple of days, but I'll release v1.2-pre in the meantime, tonight, I'm making changes to camera and WiFi, so neither are working in the preview release, it's an alpha, based on last weeks work, as some things aren't ready.

Xian

[Guest Sph1re]

hello Xian!

nobody can help you? :lol:

[Guest sette7nani]

- Fixed headset icon not showing when plugged in.

Still working on SoftAP, it's a problem, as it's half working with new library, but breaks GPS... It may take a couple of days, but I'll release v1.2-pre in the meantime, tonight, I'm making changes to camera and WiFi, so neither are working in the preview release, it's an alpha, based on last weeks work, as some things aren't ready.

Xian

great

[Guest L0cu7us]

what about the random reboot due to wifi switch on/off ?

Edited September 16, 2010 by L0cu7us

[Guest xian1243]

Right now the WiFi turns on and off by itself, but doesn't reboot as far as I can tell :)

Sph1re: Phhusson has helped me a lot, and without him pointing me in the right direction... :( I learn more every day of doing this :lol:

Camcorder should be working fine again now, I needed change some make configs, when it finishes building in 1 hour (yes it takes a long time, and sometimes even more!), and it works, I'll include it in v1.2-pre.

I won't release v1.2 final until WiFi is working spit spot, and the proximity sensor too.

[Guest Ximo F. Verde]

Right now the WiFi turns on and off by itself, but doesn't reboot as far as I can tell :(

Sph1re: Phhusson has helped me a lot, and without him pointing me in the right direction... :) I learn more every day of doing this :lol:

Camcorder should be working fine again now, I needed change some make configs, when it finishes building in 1 hour (yes it takes a long time, and sometimes even more!), and it works, I'll include it in v1.2-pre.

I won't release v1.2 final until WiFi is working spit spot, and the proximity sensor too.

So does this mean that the alpha/beta release will have wifi, or not? Sorry, this post confused me a little.. :) Thanx again, really looking forward to v1.2

[Guest xian1243]

It all depends if I get it working by tonight, but if I don't, v1.2-PRE will be without WiFi and camcorder, everything is functional ATM.

[Guest Ximo F. Verde]

It all depends if I get it working by tonight, but if I don't, v1.2-PRE will be without WiFi and camcorder, everything is functional ATM.

Great news, thanx for keeping us updated

[Guest Quipeace]

It all depends if I get it working by tonight, but if I don't, v1.2-PRE will be without WiFi and camcorder, everything is functional ATM.

Frequent news updates once a day will keep the "news?" spammers away, thanks :lol:.

[Guest xian1243]

Quipeace: I'm running into a nice little error ->

build/core/product_config.mk:192: *** device/acer/liquid/liquid.mk: PRODUCT_NAME must be unique; "a1_generic1 generic" already used by build/target/product/generic.mk device/acer/liquid/liquid.mk . Stop.

** Don't have a product spec for: 'cyanogen_liquid'

** Do you have the right repo manifest?

xD any ideas ? I'm not noob enough to figure something that simpile out >_>

[Guest Seth Cold]

Quipeace: I'm running into a nice little error ->

build/core/product_config.mk:192: *** device/acer/liquid/liquid.mk: PRODUCT_NAME must be unique; "a1_generic1 generic" already used by build/target/product/generic.mk device/acer/liquid/liquid.mk . Stop.

** Don't have a product spec for: 'cyanogen_liquid'

** Do you have the right repo manifest?

xD any ideas ? I'm not noob enough to figure something that simpile out >_>

wasn't liquids name... salsa ? i think i saw that somewhere

[Guest lvcargnini]

Quipeace: I'm running into a nice little error ->

build/core/product_config.mk:192: *** device/acer/liquid/liquid.mk: PRODUCT_NAME must be unique; "a1_generic1 generic" already used by build/target/product/generic.mk device/acer/liquid/liquid.mk . Stop.

** Don't have a product spec for: 'cyanogen_liquid'

** Do you have the right repo manifest?

xD any ideas ? I'm not noob enough to figure something that simpile out >_>

just replace the environment variable of the TARGET to CYANOGENMOD6 for example, in this particular case:

"a1_generic1 generic"

should be generic or a1_generic only not both, or remove the space in the TARGET name.