Guest Endrus Posted February 13, 2011 Report Posted February 13, 2011 EDIT: are you using an ext4 partition? ext4 is not built-in. next version will have it. EDIT: new kernel with ext4fs support is available in the first post Yes, that is it! I am using ext4... Thanks for the note!
Guest Mr Taylor Posted February 13, 2011 Report Posted February 13, 2011 Changelog v20110213 New http://db.tt/EuIvUaZ CFQ kernel 2.6.32.28 build for both classic Sense and Sense HD ROMs. What is new? - builtin ext4 filesystem support - lzma compressed kernel - vr io scheduler - simple io scheduler (sio) - slqb This is very fast indeed. I am using it with InsertCoin 1.9d, DarkTremor A2SD and swap activated.. Fabulous, Thanks :P At stamdard clock speed, Quadrant 1800+
Guest Sub501 Posted February 13, 2011 Report Posted February 13, 2011 Changelog v20110213 New http://db.tt/EuIvUaZ CFQ kernel 2.6.32.28 build for both classic Sense and Sense HD ROMs. What is new? - builtin ext4 filesystem support - lzma compressed kernel - vr io scheduler - simple io scheduler (sio) - slqb This is very fast indeed. I am using it with InsertCoin 1.9d, DarkTremor A2SD and swap activated.. Fabulous, Thanks :D At stamdard clock speed, Quadrant 1800+ Can you please describe: - the governour you use - the io sched, the read ahead val for nand and sdcard It will help me improve my mods.
Guest Mr Taylor Posted February 16, 2011 Report Posted February 16, 2011 Can you please describe: - the governour you use - the io sched, the read ahead val for nand and sdcard It will help me improve my mods. Governor: normal 245 - 998 smartass, screen off 128-245 powersave Schedulers: Deadline & 128kb for both NAND and SDIO I have tried others, but each time i reset/restart they revert back to the defaults. It seemed a little quicker with BFQ on NANDIO. I dont know if this is an issue with the sub501 manager 0.2 or I need to create a start script (Im not sure how to do that if thats what I need to do) Swap set with swappiness factor 40..lol cheers
Guest snapilica Posted February 16, 2011 Report Posted February 16, 2011 ...I have tried others, but each time i reset/restart they revert back to the defaults.... Aren't you using Sub501's Manager app? If you are, you must save & apply the settings you modify on each tab by pressing the menu button. And if you restart your phone and find out the setttings have not changed you need to load config from the menu button.
Guest Semmy7 Posted February 16, 2011 Report Posted February 16, 2011 The phone runs the latest version(v20110213) of sub501 Kernel and insertCoin 1.9.1 ROM ! I can not believe it, i am very, very happy! Thank you so much Sub501!!!
Guest Mr Taylor Posted February 16, 2011 Report Posted February 16, 2011 Aren't you using Sub501's Manager app? If you are, you must save & apply the settings you modify on each tab by pressing the menu button. And if you restart your phone and find out the setttings have not changed you need to load config from the menu button. Hi, are you using this? If I save the config file and exit the application, the schedulers and read ahead sliders revert back to deadline and 128kB, the same happens with the clock speed voltages.... even if I do save and apply my new settings, which I tried before writing my post. Thanks
Guest Sub501 Posted February 16, 2011 Report Posted February 16, 2011 (edited) Hi, are you using this? If I save the config file and exit the application, the schedulers and read ahead sliders revert back to deadline and 128kB, the same happens with the clock speed voltages.... even if I do save and apply my new settings, which I tried before writing my post. Thanks Starnge, are you 100% sure: - no setcpu is installed - your ROM has no other cpu/power management scripts/config? Edited February 16, 2011 by Sub501
Guest snapilica Posted February 17, 2011 Report Posted February 17, 2011 Hi, are you using this? If I save the config file and exit the application, the schedulers and read ahead sliders revert back to deadline and 128kB, the same happens with the clock speed voltages.... even if I do save and apply my new settings, which I tried before writing my post. Thanks And when you re-enter the app and everything is back to defaults, if you click load config does it change them?
Guest sebastiaan15 Posted February 17, 2011 Report Posted February 17, 2011 sub501 can you make a auto brightness tweak to lower brightness that you can change the auto brightness level in Sub501's Manager app that would be nice i see it alot in the desire hd forum the auto brightness mod but i search for that mod but i cant find it
Guest Sub501 Posted February 17, 2011 Report Posted February 17, 2011 sub501 can you make a auto brightness tweak to lower brightness that you can change the auto brightness level in Sub501's Manager app that would be nice i see it alot in the desire hd forum the auto brightness mod but i search for that mod but i cant find it Never heard about that. If you can provide a link or more info....
Guest bpivk Posted February 18, 2011 Report Posted February 18, 2011 can you make a auto brightness tweak to lower brightness I have found one patch and it's part of the framework so he can't make a kernel including it. I didn't find any details about it so there could be another implementation for it but the one I found can't be managed by kernel. Here is the link to such mod: http://forum.xda-developers.com/showpost.p...amp;postcount=3
Guest Sub501 Posted February 18, 2011 Report Posted February 18, 2011 I have found one patch and it's part of the framework so he can't make a kernel including it. I didn't find any details about it so there could be another implementation for it but the one I found can't be managed by kernel. Here is the link to such mod: http://forum.xda-developers.com/showpost.p...amp;postcount=3 Thanks for this info. Of course I can't do it in kernel. I will play with it in my private ROM.
Guest sebastiaan15 Posted February 18, 2011 Report Posted February 18, 2011 sub501 here are some links for the auto brigness tweak in kernel http://forum.xda-developers.com/showthread.php?t=801712 http://forum.xda-developers.com/showthread.php?t=899540 http://forum.xda-developers.com/showthread.php?t=708660 kan you take a look at this link there is also a app for it
Guest einaw Posted February 19, 2011 Report Posted February 19, 2011 Sub501, Thank you so much. This is IMO the best kernel out there. I was with you some months ago when on Modaco roms, but I've since abandoned Modaco long time ago and am now on other roms. I could not forget your kernel though, and I'm thrilled to see it's still under development :D I am currently on insertcoin 1.9.1. with your kernel, but I'm having a bit higher battery-drain than I had on i.e. insertcoin 1.8b with snq kernel. Screen off, all sync/data off: Typically between -22mA and -26mA, sometimes as low as -6mA to 8 mA, but never lower. I believe I earlier had -2-3mA on earlier versions. Minimum apps installed. Anyone have ideas if this is related to rom or kernel, or any other things? Any info I can post in order to locate the source of this power-usage? Thank you!
Guest Sub501 Posted February 19, 2011 Report Posted February 19, 2011 Sub501, Thank you so much. This is IMO the best kernel out there. I was with you some months ago when on Modaco roms, but I've since abandoned Modaco long time ago and am now on other roms. I could not forget your kernel though, and I'm thrilled to see it's still under development :D I am currently on insertcoin 1.9.1. with your kernel, but I'm having a bit higher battery-drain than I had on i.e. insertcoin 1.8b with snq kernel. Screen off, all sync/data off: Typically between -22mA and -26mA, sometimes as low as -6mA to 8 mA, but never lower. I believe I earlier had -2-3mA on earlier versions. Minimum apps installed. Anyone have ideas if this is related to rom or kernel, or any other things? Any info I can post in order to locate the source of this power-usage? Thank you! Hard to say, Now I'm using data2sd and battery goes mad...
Guest Sub501 Posted February 19, 2011 Report Posted February 19, 2011 (edited) I prepared a small website: http://sites.google.com/site/sub501androiddevelopment/ Kernel 2.6.32.29 is available there ;-) Edited February 19, 2011 by Sub501
Guest bpivk Posted February 19, 2011 Report Posted February 19, 2011 I prepared a small website: http://sites.google.com/site/sub501androiddevelopment/ Kernel 2.6.32.29 is available there ;-) Nice one. Now I have all your stuff in one place and I don't have to search for your topic on the forum every time I flash a new rom. Thanks for this great addition.
Guest ShirazS Posted February 20, 2011 Report Posted February 20, 2011 (edited) Okay so I want to start using your kernel but I have a few questions. Can I use the kernel without installing the init mods? If I do, what governor would I be using and would 128Mhz be my lowest clock speed? Also, I know it says that one of the features of the kernel is that perflock is disabled but I just wanted to confirm, if I am using a stock rooted ROM, I would not need to disable perflock before installing the kernel? Lastly, If I want to install the mods, could I flash it directly after flashing the kernel? Edited February 20, 2011 by ShirazS
Guest Sub501 Posted February 20, 2011 Report Posted February 20, 2011 Okay so I want to start using your kernel but I have a few questions. Can I use the kernel without installing the init mods? If I do, what governor would I be using and would 128Mhz be my lowest clock speed? Also, I know it says that one of the features of the kernel is that perflock is disabled but I just wanted to confirm, if I am using a stock rooted ROM, I would not need to disable perflock before installing the kernel? Lastly, If I want to install the mods, could I flash it directly after flashing the kernel? Please check the MiniSite's FAQ page (post #1).
Guest Sub501 Posted February 20, 2011 Report Posted February 20, 2011 (edited) Double post Edited February 20, 2011 by Sub501
Guest ShirazS Posted February 20, 2011 Report Posted February 20, 2011 Please check the MiniSite's FAQ page (post #1). That was an oversight on my part, apologies.
Guest Sub501 Posted February 20, 2011 Report Posted February 20, 2011 That was an oversight on my part, apologies. No problemo. The FAQ page is under construction. I plugged your questions there.
Guest einaw Posted February 20, 2011 Report Posted February 20, 2011 Hard to say, Now I'm using data2sd and battery goes mad... I prepared a small website: http://sites.google.com/site/sub501androiddevelopment/ Kernel 2.6.32.29 is available there ;-) Kernel .29 + updated mods did the trick :D Between -3 and -4 now, mostly 3. Me like a lot. I also like the new site a lot, much better to have it there. Thank you so much for all your work!
Guest Sub501 Posted February 21, 2011 Report Posted February 21, 2011 Hard to say, Now I'm using data2sd and battery goes mad... The power drain is not coming from Kernel or ROM. I forgot about my new habit: using phone as a music player (equalizer activated) for 8-10hours/day.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now