Guest alienbb Posted October 17, 2010 Report Posted October 17, 2010 Theres no Market in the rom ? am I missing somthing? :)
Guest DanWilson Posted October 17, 2010 Report Posted October 17, 2010 Theres no Market in the rom ? am I missing somthing? :) You need to install GApps. I thought I said that in the first post? Meh. Looks in the real CM6 thread's first post.
Guest alienbb Posted October 17, 2010 Report Posted October 17, 2010 You need to install GApps. I thought I said that in the first post? Meh. Looks in the real CM6 thread's first post. the GApps link need updating
Guest DanWilson Posted October 17, 2010 Report Posted October 17, 2010 the GApps link need updating To...?
Guest jack_itb Posted October 18, 2010 Report Posted October 18, 2010 I had this problem only with the 2.2 roms (flb2 & cm6). Never saw it with 2.1 roms. It doesn't happen when the screen goes off and I immediately wake it up again. But after some time of inactivity it is reproducible with my pulse (when it is set to disconnect WLAN when the screen goes off...). Similar to the GPS-problems I have: Only with the 2.2 roms (flb2 & cm6) the GPS signal gets lost sometimes. Never saw it with 2.1 roms. It seems the app "Wifi fixer" fixed my WLAN problems. :)
Guest biron_w Posted October 19, 2010 Report Posted October 19, 2010 Does any body have a problem with low call volume? Even when I set in-call volume to full it's still really low :P
Guest Epic-Emodude Posted October 19, 2010 Report Posted October 19, 2010 Please could someone upload the stock CM wallpaper. Ive tried to find it on my phone but cant. Thanx
Guest sentroy Posted October 20, 2010 Report Posted October 20, 2010 (edited) So I've got 2 issues that i need help with. 1. Ringtone issue. - Ringtones only play once? (I know that one temp fix is using a longer ringtone, but I for one like the standard digital one) 2. 802.1X TTLS-PAP, disconnect. - I get disconnected a lot, and later being unable to reconnect to the network, until I restart wifi. Not sure if it's Android itself or the network, but it works on a laptop without problems. Any help here would be appreciated. Thank in advance! Edited October 20, 2010 by sentroy
Guest vladimir.mitevski Posted October 20, 2010 Report Posted October 20, 2010 Hi guys, does anybody know why I can't connect to internet through my pulse? I am running CyanogenMod6 and the drivers on my pc are for 2.1. So do I need to install driver for 2.2 and where can i find it?thanks
Guest DanWilson Posted October 20, 2010 Report Posted October 20, 2010 So I've got 2 issues that i need help with. 1. Ringtone issue. - Ringtones only play once? (I know that one temp fix is using a longer ringtone, but I for one like the standard digital one) 2. 802.1X TTLS-PAP, disconnect. - I get disconnected a lot, and later being unable to reconnect to the network, until I restart wifi. Not sure if it's Android itself or the network, but it works on a laptop without problems. Any help here would be appreciated. Thank in advance! Don't know about number 1, but number 2 is known. I think someone said something about the app "Wifi Fixer"? Hi guys, does anybody know why I can't connect to internet through my pulse? I am running CyanogenMod6 and the drivers on my pc are for 2.1. So do I need to install driver for 2.2 and where can i find it?thanks USB Tethering? Didn't know it worked. Hell, I didn't know any tethering worked. Post in the real CM6 thread and wait for a reply from Tom.
Guest vladimir.mitevski Posted October 20, 2010 Report Posted October 20, 2010 USB Tethering? Didn't know it worked. Hell, I didn't know any tethering worked. Post in the real CM6 thread and wait for a reply from Tom. I was using barnacle wifi tethering, but its not working in CM6, so i think it is something with the drivers, since my pc don't recognize the phone correctly with 2.1 drivers. I have nandroid 2.1 backup, so will use it for now. thanks
Guest Sh4d0w940 Posted October 21, 2010 Report Posted October 21, 2010 I was using barnacle wifi tethering, but its not working in CM6, so i think it is something with the drivers, since my pc don't recognize the phone correctly with 2.1 drivers. I have nandroid 2.1 backup, so will use it for now. thanks It is working, you just need to enable the option 'skip wpa_supplicant' in the settings. Sh4d0w940
Guest SonMauri Posted October 21, 2010 Report Posted October 21, 2010 Hello. I recently reinstalled 2.2 on my device. The device it's working OK but apparently A2SD is not. Order of install: -backup with rom manager -Revert to 2.1 (Venezuela) -> it was a mistake -Apply amonra -Apply FLB mod 1.5 -Flash rom manager -With rom manager full wipe -In recovery flashed 2.2 0.2 -In recovery flashed a2sd + oc + swap -In recovery flashed gapps Is there a command line to check if everything has been installed correctly? Or a command to run to enable a2sd or something like that?
Guest goce.nakov Posted October 21, 2010 Report Posted October 21, 2010 Hello. I recently reinstalled 2.2 on my device. The device it's working OK but apparently A2SD is not. Order of install: -backup with rom manager -Revert to 2.1 (Venezuela) -> it was a mistake -Apply amonra -Apply FLB mod 1.5 -Flash rom manager -With rom manager full wipe -In recovery flashed 2.2 0.2 -In recovery flashed a2sd + oc + swap -In recovery flashed gapps Is there a command line to check if everything has been installed correctly? Or a command to run to enable a2sd or something like that? In terminal emulator type su followed buy a2sd check
Guest SonMauri Posted October 21, 2010 Report Posted October 21, 2010 Thanks.... a2sd not found.... Any ideas what i did wrong?
Guest TonyDigi Posted October 21, 2010 Report Posted October 21, 2010 (edited) Hello. I recently reinstalled 2.2 on my device. The device it's working OK but apparently A2SD is not. Order of install: -backup with rom manager -Revert to 2.1 (Venezuela) -> it was a mistake -Apply amonra -Apply FLB mod 1.5 -Flash rom manager -With rom manager full wipe -In recovery flashed 2.2 0.2 -In recovery flashed a2sd + oc + swap -In recovery flashed gapps Is there a command line to check if everything has been installed correctly? Or a command to run to enable a2sd or something like that? Need flash dapps2sd_2.7.5.2_signed . i think so. But if still problem, try this way: 1- do full wipe and re format sdcard in recovery <set swap, ext partition> 2-Flash CM6 by tomG in fastboot, reboot 3-Flash Gapps_pulse_signed 30/09 in recovery, reboot 4-Flash dtapps2sd_2.7.5.2_signed in recovery, reboot After this you can "a2sd check" in terminal ,status it now: swap starts, private apps run on sd, David-cache run in internal . But if you check #free, still don't have swap > 5-Flash flb_boot_0.20.img in fastboot. reboot.Oc enable now and Swap works. Check sdcard& phone store, internal phone storage still has about 54MB free. It means Gapps have installed and runs in internal phone storage. My exps: don't run david-cache on your sdcard. < don't type a2sd cachesd> . Cause my phone had errors by this<lag, auto reboot ... > And nows if you want to install any apps to sd, download *.apk and use Android Comander install it by set " install private" < if you try "regular install", apps will be in internal phone storage>. I did this and everything works with no lag no bug. It's the way to set install to sd or internal. < i don't know why,but i think Gapps need to run in internal > I'm trying to install "Apps to SD" <app in market> . I will report it late Edited October 21, 2010 by TonyDigi
Guest DanWilson Posted October 21, 2010 Report Posted October 21, 2010 Need flash dapps2sd_2.7.5.2_signed . i think so. But if still problem, try this way: 1- do full wipe and re format sdcard in recovery <set swap, ext partition> 2-Flash CM6 by tomG in fastboot, reboot 3-Flash Gapps_pulse_signed 30/09 in recovery, reboot 4-Flash dtapps2sd_2.7.5.2_signed in recovery, reboot After this you can "a2sd check" in terminal ,status it now: swap starts, private apps run on sd, David-cache run in internal . But if you check #free, still don't have swap > 5-Flash flb_boot_0.20.img in fastboot. reboot.Oc enable now and Swap works. Check sdcard& phone store, internal phone storage still has about 54MB free. It means Gapps have installed and runs in internal phone storage. My exps: don't run david-cache on your sdcard. < don't type a2sd cachesd> . Cause my phone had errors by this<lag, auto reboot ... > And nows if you want to install any apps to sd, download *.apk and use Android Comander install it by set " install private" < if you try "regular install", apps will be in internal phone storage>. I did this and everything works with no lag no bug. It's the way to set install to sd or internal. < i don't know why,but i think Gapps need to run in internal > I'm trying to install "Apps to SD" <app in market> . I will report it late All apps must be internal. The way DarkTremor A2SD works is it mirrors (or similar) the data partition on the ext partition on the SD card. Official Froyo A2SD does not work. Do not try it. You shall fail. Remember, the Frozen Yogurt is a lie.
Guest TonyDigi Posted October 21, 2010 Report Posted October 21, 2010 (edited) All apps must be internal. The way DarkTremor A2SD works is it mirrors (or similar) the data partition on the ext partition on the SD card. Official Froyo A2SD does not work. Do not try it. You shall fail. Remember, the Frozen Yogurt is a lie. i use this, set apps install private. ex: Angry bird install , internal phone storage lose only some data <very little> ,and if install regular data lose much more 12.3MB. It's too much good for me now on CM6 Edited October 21, 2010 by TonyDigi
Guest jack_itb Posted October 22, 2010 Report Posted October 22, 2010 I think someone said something about the app "Wifi Fixer"? Yes, but it did work only at the beginning. Now it sometimes works and sometimes it doesn't. Additionally the app is kicked out of RAM very fast, so it isn't always active when the screen is turned on. Not a good solution :P And that's the only reason I'm not absolutely happy with CM6. Everything else is so very cool, but this nearly makes me install Android2.1 again :D
Guest goce.nakov Posted October 22, 2010 Report Posted October 22, 2010 How do I change swappiness? a2sd swappy#......# is the number you wish to set swappiness
Guest Fusion0306 Posted October 22, 2010 Report Posted October 22, 2010 a2sd swappy#......# is the number you wish to set swappiness What's the default in cm6?
Guest goce.nakov Posted October 22, 2010 Report Posted October 22, 2010 What's the default in cm6? 60 is default for android
Guest harrise Posted October 22, 2010 Report Posted October 22, 2010 Does anybody know, is bluetooth working with VOIP on CM6? I read that Froyo support bluetooth with Voip Apps. Thank you
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now