DELL STREAK Froyo Build Beta - Version 1.2.0 Released

[Guest Stephen Hyde]

it'll settle after a short while :) once it settles to slower pace let it run a bit then press ctrl+c to cancel it and copy as much as you can and paste into www.pastebin

[Guest Stephen Hyde]

I Have put the .mbn in the folder with Fastboot and put the Streak in Fastboot

do I have to run Fastboot to get the Command window ?

run cmd

then try the commands - if anyone who has done baseband upgrade wants to write a detaield howto feel free and ill add it on main post

[Guest OrionBG]

it'll settle after a short while :) once it settles to slower pace let it run a bit then press ctrl+c to cancel it and copy as much as you can and paste into www.pastebin

http://pastebin.com/jhw8FNr6

[Guest Gopu]

Steve,

thanks for the updated files

Both files downloded at around 16-1.8MB/s

Just one question :

Does baseband upgrade improve performance ?

If not what is the purpose ?

Thanks once again

[Guest Stephen Hyde]

http://pastebin.com/jhw8FNr6

ok go into adb shell then run the following commands CAREFULLY

cd /data

busybox_1P8P1 rm -rf *[/code]


then run ls and if it returns anything except lost+found run rm -r <name> where <name> is the folder name you see.


then run reboot and wait

[Guest Stephen Hyde]

Steve,

thanks for the updated files

Both files downloded at around 16-1.8MB/s

Just one question :

Does baseband upgrade improve performance ?

If not what is the purpose ?

Thanks once again

baseband is primarily to prevent flashing lights as the baseband and kernel must match , their could be other advantages like better battery etc but not confirmed

[Guest mmmputch]

Hey Steve thanks for all your work! Can we still root the streak with this update?

[Guest Stephen Hyde]

yes root should work fine

[Guest OrionBG]

ok go into adb shell then run the following commands CAREFULLY

cd /data

busybox_1P8P1 rm -rf *

then run ls and if it returns anything except lost+found run rm -r <name> where <name> is the folder name you see.

then run reboot and wait

did this

Still only the dell logo remains on the screen

Correction! It finally booted! :)

Thank you!

What was the problem?

Edited November 4, 2010 by OrionBG

[Guest Stephen Hyde]

watch logcat is it still looping with errors

[Guest Passe]

did this

Still only the dell logo remains on the screen

Same problem here.

Edited November 4, 2010 by Passe

[Guest Stephen Hyde]

factory reset sometimes doesn wipe properly-

passee try the instructions i just posted please

[Guest mmmputch]

yes root should work fine

Awesome thanks for the quick reply. Just to be sure, should I use the most recent universal androot?

[Guest OrionBG]

factory reset sometimes doesn wipe properly-

passee try the instructions i just posted please

You are right! For instance I still have the Black theme that I had installed on 1.1.1

Is there a way to wipe all partitions? maybe in CWR or throw ADB?

Just an update!

I formatted the /system patition with CWR and then flased the rom again! then Factory restore and the ROM Booted for under a minute! :)

Edited November 4, 2010 by OrionBG

[Guest Stephen Hyde]

not easily a way to wipe no, and the newest androot is in rom already :)

[Guest Cue_32]

Hey Steve, just to update you on the status of my Streak.

Beta AT&T unlocked running 1.1.1

Since the noBaseband update didn't work and kept bootlooping with flashing lights, I flashed back to 1.1.1 successfully.

Fastboot and flashed the new baseband fine, flashed the Newbaseband.zip file and on Dell Logo for over 10 minutes now.

Followed instructions to the T including Factory Reset immediately after flashing the new 1.2NewBaseband.zip ROM.

[Guest mmmputch]

not easily a way to wipe no, and the newest androot is in rom already :)

Perfect, I will give it a shot and post my results in a little while. Thanks again!

[Guest gillebob]

Steve, thanks for your ongoing fantastic work on this, you're the reason I've still got the streak.

Just flashed 1.2 new baseband and lost my network (o2.ie) so flashed the old baseband version without any drama, except now I have the flashing lights.

Ran quadrant at 1100

Ran neocore at 32

Ran linpack from 3.1 to 29.00

Loving the wife teather, thanks Steve.

[Guest steflucrene]

Hi steve,

I was in the V 1.1.1 version so I download the update-1.2.0-newbb.zip file and the http://build2.streakdroid.com/amss.mbn file...Well I think it's the goods files...

reboot and fastbootmode -> flash amss.mbn OK

reboot and flash the newbb.zip Ok

reboot and reset factory Ok

But the boot is waiting on the dell logo...

So reboot in fastboot mode and try to launch fastboot logcat -> No device found...

So I restart from the beginning ...same...Wait on dell logo since 20 minutes...

So can I flash the V.1.1.1, I keep it on sd, with the new baseband ?

Thanks

[Guest gillebob]

Obviously that should read WIFI teather.. :)

[Guest phjnky]

ok go into adb shell then run the following commands CAREFULLY

cd /data

busybox_1P8P1 rm -rf *

then run ls and if it returns anything except lost+found run rm -r <name> where <name> is the folder name you see.

then run reboot and wait

I had the same problem but this fixed it. The call waiting works now on AT&T with the new baseband and load. Thanks!

[Guest Stephen Hyde]

lol for those stuck at dell logo try my info on previous page also

[Guest Graysson]

Hm...it all worked but now i have the endless loop while booting.

What do you mean with adb shell and how do i get there to do the deleting?

Edited November 4, 2010 by Graysson

[Guest Stephen Hyde]

you need adb (the files are available at downloads.streakdroid.com - adb.exe and the 2 adb dll files

[Guest marra2]

endless boot loop here too just reflashed new baseband zip and same thing so will try adb thing now !