[ROM] Liquid Community ROM Froyo 2.0

[Guest Winston Ma]

kernel source is never released with an official rom because people wouldn't know what to do with it, and wouldn't have a use for it in most cases anyway.

it's always released through a separate method, and generally a short(or sometimes long) period after release of the rom itself.

Malez... I just wonder if we can create our own version of 2.2 kernel by the following step

1. Got the old source code (so far only 2.1 source is available)

2. Create a patch by the diff-ing with the original source (just grab the original driver... and such and such)

3. Apply the patch against the 2.2 kernel

4. Add the OC patch

Thanks

[Guest Morris Lee]

kernel source is never released with an official rom because people wouldn't know what to do with it, and wouldn't have a use for it in most cases anyway.

it's always released through a separate method, and generally a short(or sometimes long) period after release of the rom itself.

OOPS! my bad, I thought I was under the "Document" section under under Froyo 2.2, but it appears that there is only one version.

How would we obtain the kernel source for the 2.2? it appears that there is one for the Liquid E (2.1 I assume) directly on acer's page, so I assume the froyo version might be posted eventually???

Morris Lee

[Guest runner780]

I hope it is not a hardware usb connector problem but it could be.

Are you able to access fastboot when battery is removed and usb is plugged ?

Dont think it's a hardware problem cause same thing just happined on my friends liquid and that one is only few days old..

a third liquid with older lcr 1.8 can connect to the pc's.

If i try fastboot same thing happens with and without the battery in

think i need to reflash an acer leak or released 2.1 bin.

Vovidaisu managed to do it from a sd card with this method:

I have modified it for Liquid A1 but there is some bugs caused by ROM/RAM size.

Will keep u updated.

QUOTE

Please help i tried everything else...!!!!

need to flash bin again but i cannot connect to pc.

I'd like to try this method but i have a liquid A1. Can you make the same for a1 with the file from mcboydesign?

Hey guys...you try download Froyo ROM of Liquid E from below links

1) Download ROM of Liquid E (Froyo) : http://www.fileserve.com/file/5xutRP8

2) How to flash ROM with SD card

* Unzip the downloaded file and you will get 02 items: update.zip and folder image

* Copy both of them to SD card

* Power off your Liquid E

* Press and hold <Volume down> + <Camera> and press <Power> until it vibrates 3 times. Then release all.

It is used only for Liquid E not Liquid A1.

[Guest Small_Hacker]

Is the source released?

Any update ideas? Expecting your update

If. Possible, tell us what will be updated in advance

Really look fw your gd news

[Guest magritte]

Touch settings are loaded about 30s after boot but they are. So you don't see them jsut after booting but the will be applied a little later (set them to 200 and apply on boot if you don't belive me, you will see the difference B))

I'm still seeing mixed results with this. Sometimes (probably most times) it does in fact load automatically shortly after a boot but sometimes it fails to do so and it won't automatically load no matter how long I wait so I have to manually go into LCR Settings to apply the fix. I'm using 30/70 so I have to enter in the values manually each time which is also a pain. I haven't been able to figure out under what circumstances specifically it fails to auto apply the settings but I have a vague suspicion it may occur when rebooting as opposed to powering off. But that's just a guess at this point. I'll play with it to see if I can figure it out.

[Guest magritte]

I'll play with it to see if I can figure it out.

No, I just did a bunch of reboots both using the Quick Boot util or by powering off and back on. The touch sensitivity settings were not automatically restored on any of them. Looks like I always need to do it manually now...

[Guest devoluti0n]

I'm I the only one not beiing able to find the themes selector option ?

[Guest sommm]

hey guys,

first of all, i love this rom, but...

it is possible to change the boot animation to this: http://forum.xda-developers.com/showthread.php?t=701574 ? i've alredy copied the zip file to sd/lcrsettings/bootanimations, but i can't select it in the lcr settings app.

any solution?

it would be nice:-)

thanks:

s

[Guest youpi666]

it is possible to change the boot animation to this: http://forum.xda-developers.com/showthread.php?t=701574 ? i've alredy copied the zip file to sd/lcrsettings/bootanimations, but i can't select it in the lcr settings app.

any solution?

Use adb :

adb push lcarsboot.zip /data/local/bootanimation.zip

B)

Edited November 20, 2010 by youpi666

[Guest sommm]

Use adb :

adb push lcarsboot.zip /data/local/bootanimation.zip

B)

and without adb...?

[Guest seb86]

and without adb...?

copy bootanimation.zip in system/media with root explorer

[Guest Rajit]

hey guys,

first of all, i love this rom, but...

it is possible to change the boot animation to this: http://forum.xda-developers.com/showthread.php?t=701574 ? i've alredy copied the zip file to sd/lcrsettings/bootanimations, but i can't select it in the lcr settings app.

any solution?

it would be nice:-)

thanks:

s

Rename it to bootanimation.zip and then use root explorer to copy it to /data/local

And speaking of bootanims, check this out: http://forum.xda-developers.com/showthread.php?t=648555

And here is the liquid version: http://www.mediafire.com/?tnzzwvmjqye

Enjoy B)

[Guest Chewy11]

Rename it to bootanimation.zip and then use root explorer to copy it to /data/local

And speaking of bootanims, check this out: http://forum.xda-developers.com/showthread.php?t=648555

And here is the liquid version: http://www.mediafire.com/?tnzzwvmjqye

Enjoy B)

Nice!!!

OK so I love the look of the BIOS boot animation....

and I got it going after pushing it with ADB. the zip file found in the data folder of the extracted zip is the correct one to push

Edited November 20, 2010 by Chewy11

[Guest sommm]

Rename it to bootanimation.zip and then use root explorer to copy it to /data/local

And speaking of bootanims, check this out: http://forum.xda-developers.com/showthread.php?t=648555

And here is the liquid version: http://www.mediafire.com/?tnzzwvmjqye

Enjoy B)

great, it works!

but what if I want some sound, while the animation goes, what should I have to do?

thanks

s

[Guest Delnar_Ersike]

but what if I want some sound, while the animation goes, what should I have to do?

I believe you'd have to create a boot_animation.xml and configure it to use a specific audio track.

As for LCR 1.1.2, I'm very impressed with its performance. I haven't tested Quadrant (as Quadrant score are usually based on I/O, which is in fact probably the least important part of a device's performance in real-world situations), but I've gotten much higher FPS scores on Fps2d (~56 vs. ~51), NenaMark1 (~17.5 vs. ~13.1), and Neocore (~28.6 vs. ~25) with LCR than with stock.

[Guest Rajit]

I believe you'd have to create a boot_animation.xml and configure it to use a specific audio track.

As for LCR 1.1.2, I'm very impressed with its performance. I haven't tested Quadrant (as Quadrant score are usually based on I/O, which is in fact probably the least important part of a device's performance in real-world situations), but I've gotten much higher FPS scores on Fps2d (~56 vs. ~51), NenaMark1 (~17.5 vs. ~13.1), and Neocore (~28.6 vs. ~25) with LCR than with stock.

I agree, the performance is great with this rom. But lately, the performance on my phone has REALLY degraded. It takes forever to load everything after booting and when i connect it to my notebook and switch on mass storage, it takes really long to actually get the mass storage working? Any ideas? A cache wipe maybe?

Another bug: Whenever I turn on wifi, it does turn on but does not auto connect to the remembered network (there's only one). But as soon as I enter the wifi settings menu, it automatically connects to the network. Strange and consistent. Very buggy!!!

Apart from all this, totally love the rom!

Edited November 21, 2010 by Rajit

[Guest tc4101]

hi, is there anyway to tweat the external speak so that it goes louder?

[Guest PhilNelwyn]

hi, is there anyway to tweat the external speak so that it goes louder?

For what kind of use ? There are 'tweaks' for calls and navigator (gps).

[Guest MisfitGeek]

For what kind of use ? There are 'tweaks' for calls and navigator (gps).

Can't tell for calls, but for GPS use (I'm on Navigon) it's loud. Navigon love to speak and I have to lower a bit volume.

I didn't really try Google navigation with LCR, as voice is too ugly B) . If there's any tweak for a better voice...

[Guest tc4101]

For what kind of use ? There are 'tweaks' for calls and navigator (gps).

for google navigator is very quiet... where do i do this tweak? in LCR setting>tweak> i only see "audio call mode"

is that what u r refering to?

[Guest PhilNelwyn]

for google navigator is very quiet... where do i do this tweak? in LCR setting>tweak> i only see "audio call mode"

is that what u r refering to?

For G navigator loudness, Malez and Vache said you have to disable new audio codecs.

Edited November 22, 2010 by PhilNelwyn

[Guest tc4101]

thanks i'll try that

[Guest malez]

for google navigator is very quiet... where do i do this tweak? in LCR setting>tweak> i only see "audio call mode"

is that what u r refering to?

That is new audio codec option since 1.1.2

[Guest malez]

I hope to be able to connect more often next week

[Guest Ramdanih]

I have new issue..

why every turn off my phone.. and turn on.. sometimes aplication force close..

Like Appbrain, twitter, picplz, messenger, launcherpro, etc..

even applications that are updated right again. and I have to renew it again. Application returned as before.