CyanogenMod 6 port for Pulse

[Guest totiadrenalin]

No you have to use swapper 2 or dartremor a2sd to use swap. To check the memory usage, go to terminal, type free. So you can see if swap is already enabled.

It is possible to activate swap on boot without swapper2 even without dta2sd.

The only thing you need to do is to create a shell script.

type this into new text document

mkswap /dev/block/mmcblk0p3

swapon /dev/block/mmcblk0p3

and save this as (13swap)

adb remount

adb push ~path-to/13swap /system/etc/init.d/13swap

And that's it.

You will active the swap partition on next reboot.

Just to mention.

Use some Linux text editor, and never use any Windows text editor.

Other wasy, the script wont work.

Edited December 23, 2010 by totiadrenalin

[Guest exitium]

i have swap activated

"buffers total used free shared

Mem: 107412 104148 3264 0

20

Swap: 19324 10232 9092

Total: 126736 114380 12356

maybe my swap partition is too small?

[Guest DanWilson]

Tell me two things.

What mod version is 0.4? (6.1.1, CM6 Stable - whatever one that is)

And why the hell is it that every time that I flash a new ROM, DTA2SD works until a reboot, then fails and I can't receive texts (no memory)?

Makes me ;)

Is there any point in me upgrading from 0.3?

Oh wait, I planned to go back to the old 1.5 MCR....

Meh, screw that! :)

[Guest totiadrenalin]

Tell me two things.

What mod version is 0.4? (6.1.1, CM6 Stable - whatever one that is)

And why the hell is it that every time that I flash a new ROM, DTA2SD works until a reboot, then fails and I can't receive texts (no memory)?

Makes me :D

Is there any point in me upgrading from 0.3?

Oh wait, I planned to go back to the old 1.5 MCR....

Meh, screw that! :)

The problem with the messages?

Well yeah, out of memory, but if you use swap?

Well you will never get out of memory, because of that every data, that you doesn't use, but it's process stays in ram will be cached in swap.

And that's way you will always have enough free ram memory not only for the messages (mms.apk), but for even for multitasking to.

And if you are so interested about what is better in .40 then .30 CM6.1?

Well speed and stability.

That's better in the new rom.

Personally.

I don't like 0.30 cm6 rom at all.

It's even more buggy than 0.20 rom

And if you have plan to use the Pulse as regular phone?

Well then why don't you go back to the stock 1.5 Huawey rom?

;)

[Guest totiadrenalin]

i have swap activated

"buffers total used free shared

Mem: 107412 104148 3264 0

20

Swap: 19324 10232 9092

Total: 126736 114380 12356

maybe my swap partition is too small?

No.

That's the compcache

ramzswap0

not the swap partition, which is mmcblk0p3

[Guest Ellia]

The problem with the messages?

Well yeah, out of memory, but if you use swap?

Well you will never get out of memory, because of that every data, that you doesn't use, but it's process stays in ram will be cached in swap.

And that's way you will always have enough free ram memory not only for the messages (mms.apk), but for even for multitasking to.

And if you are so interested about what is better in .40 then .30 CM6.1?

Well speed and stability.

That's better in the new rom.

Personally.

I don't like 0.30 cm6 rom at all.

It's even more buggy than 0.20 rom

And if you have plan to use the Pulse as regular phone?

Well then why don't you go back to the stock 1.5 Huawey rom?

:)

If DTA2SD doesn't work after a restart the swap scripts aren't executed and swap doesn't work. But the CM-build contains a function, that the SMS-App stays in memory. Do you use this option?

[Guest totiadrenalin]

If DTA2SD doesn't work after a restart the swap scripts aren't executed and swap doesn't work. But the CM-build contains a function, that the SMS-App stays in memory. Do you use this option?

Even if he do use this options.

If on boot time the ram memory goes overloaded then the messages service wont start.

you can check this in:

Settings->Applications->Running services

You should see there the (Google Messaging Service)

If you don't see that service in there?

Well simply start the Messaging application.

And this will trigger the Google Messaging Service.

Even then you will be able to receive messages without any problem.

[Guest exitium]

No.

That's the compcache

ramzswap0

not the swap partition, which is mmcblk0p3

ummm. what? :)

can u please explain more detailed, what should i do ;) ?

ty very much

[Guest DanWilson]

The problem with the messages?

Well yeah, out of memory, but if you use swap?

Well you will never get out of memory, because of that every data, that you doesn't use, but it's process stays in ram will be cached in swap.

And that's way you will always have enough free ram memory not only for the messages (mms.apk), but for even for multitasking to.

I meant storage memory. I have 100MB of SWAP, you think I can run out of RAM? :(

And if you are so interested about what is better in .40 then .30 CM6.1?

Well speed and stability.

That's better in the new rom.

Personally.

I don't like 0.30 cm6 rom at all.

It's even more buggy than 0.20 rom

I noticed. I just flashed it. Too lazy to set it all up though... :)

And if you have plan to use the Pulse as regular phone?

Well then why don't you go back to the stock 1.5 Huawey rom?

;)

I might. Once I get my Desire Z anyway. Although I'll probably use it for testing Toms ROMs. ;)

@Ellia - I use Swapper2 anyway. :D

[Guest peelie]

No.

That's the compcache

ramzswap0

not the swap partition, which is mmcblk0p3

so how do you check if swap is working - see if there is a mmcblk0p3 partition?

[Guest totiadrenalin]

so how do you check if swap is working - see if there is a mmcblk0p3 partition?

Unzip this and use adb push

You have read me in the zip file

Swap.zip

[Guest Tom G]

so how do you check if swap is working - see if there is a mmcblk0p3 partition?

adb shell cat /proc/swaps

Should tell you what swap spaces are active.

[Guest Ellia]

I have problems to connect with my bluetooth-based hands-free car kit. Anyone else?

[Guest rulerofkaos]

I have problems to connect with my bluetooth-based hands-free car kit. Anyone else?

I have problems with bluetoth, too. I can pair with my pc, but I can't send files.

[Guest hugolost]

How can i change it when i pressing the Red button the pulse dont go to sleep?

When i press the red button i want to close the running App.

[Guest karlosoliveira]

How can i change it when i pressing the Red button the pulse dont go to sleep?

When i press the red button i want to close the running App.

Spare Parts->End button behavior->Go to home

[Guest twrock]

How can i change it when i pressing the Red button the pulse dont go to sleep?

When i press the red button i want to close the running App.

That setting is now in "Spare Parts", an app in your drawer.

(Incidentally, a search of this forum would have gotten you the answer quicker, since this has been covered many times already.)

Edit: Looks like I was beat to it by seconds. :(

Edited December 25, 2010 by twrock

[Guest twrock]

Ahhh, nothing like a Christmas morning fresh cup of coffee and a fresh install of CM6.1beta0.40! ;)

I gotta say, I think it was better to have started over from scratch instead of updating from 0.30 (which is what I had been running). Things are running noticeably smoother than before. And I finally figured out what to get rid of before flashing the CM rom and Gapps so that there would be enough room for DT Apps2SD and my other rom tweaks (mostly Chinese stuff). And I really don't think that the basic CM6.1beta0.40 rom DTA2SD and the Flibblesan's Pulse version of Gapps will fit in the space. Before modifying it, I had experimented with a basic install of just those three and was always missing apps after the install. So I can only suggest that anyone who tries to do it this way, do some rom modding first. As always, YMMV. And as always, I could be wrong. :(

(Edit: And, since CM by default does not permanently remove Gapps from /system during installation, the /system partition remains overly full, even if you do a factory reset/data wipe. I don't know how the install scripts for the different versions of Gapps are set up, but I'm pretty sure they don't delete anything out of /system either. So once /system is full, it stays full, even if you change to a different/smaller Gapps. So, my solution before attempting this latest fresh installation was to first go in with CW Recovery and format /system. That's the only way I could really create the space necessary for DT Apps2SD and for the other apps I wanted to put into the rom. Hmm, I guess I can see how the default installation system for CM can be disadvantageous. But in general, I understand why they chose to do it that way.)

And, for the record, no, I'm not being a Scrooge. We are celebrating Christmas late this year because of family.

So, Merry Christmas to all!

Edited December 25, 2010 by twrock

[Guest hugolost]

Spare Parts->End button behavior->Go to home

I cant find these option. I used ADW.Launcher.

[Guest Ellia]

I cant find these option. I used ADW.Launcher.

It's a normal program which you can find in the app drawer.

[Guest jacksonrodeo]

I cant find these option. I used ADW.Launcher.

or:

Menu, Settings, General info and option, End button behavior

Jack

[Guest Eicodi]

Hi, Anyone remember how to change the Mac Address? I have CM (0.40).

Thanks

late Mery Christmas!

[Guest salvad0r]

Good afternoon, someone has tried to install this mod in a U8110 Huawei believe is known in other countries for pulsemini, I am excited at the possibility of installing Froyo in my mobile, however I have doubts about the compatibility, thank you very much and Merry Christmas

P.D sorry for my Google Translator english :(

[Guest AntonioPT]

Good afternoon, someone has tried to install this mod in a U8110 Huawei believe is known in other countries for pulsemini, I am excited at the possibility of installing Froyo in my mobile, however I have doubts about the compatibility, thank you very much and Merry Christmas

P.D sorry for my Google Translator english :(

This is a mod only for Huawei U8220/30 phones. It will not work on a U8110.

[Guest AntonioPT]

Hi, Anyone remember how to change the Mac Address? I have CM (0.40).

Thanks

late Mery Christmas!

You can't. It's a known bug.